10 years later still the best video on the subject.

This is why FabFilter are my favourite plugin manufacturers. A lot of manufacturers just push on you a new plugin becase "you need this to make the mix sound awesome!" - Waves being a good example (not that Waves plugins are bad). FabFilter realises that it's not only about the tools you use, but how you use them, and they even actively try to educate you FOR FREE! Never stop making awesome plugins and awesome instructional videos!

Watching this for free is unbelievable ... Dan Worrall and FabFilter you guys are the best!

Now that is a technically well made tutorial. Not lile this stuff from other audio companies that just say "hey, just hi pass that, low pass that, here boost this and viola, now you know everything about eq". Thumbs up, guys.

I wish this guy could sit next to me as I make music and educate me with his soothing voice.

Dan Worrall. De-mystifies a complex subject so perfectly. Absolute legend.

Fabfilter is such a lucky company to be able to have Brains like Dan Worrall's speak with and for them.

Dan's balance of right and left brain use is remarkable. Any time I need some humbling about my own blend of talent and intellect compared to that of the average Joe, I'll watch one of his tutorials and remind myself how important it is to exercise the two in concert as frequently as possible. Dan is to tutorials what FabFilter are to plugins.

Really excellent and best explanation I've come across about EQ phase. I'm shocked at how much the low and high pass filters warp the phase around the cutoff frequency. I'll treasure this information ! Many thanks to fabfilter for this free video. I'd love to see Dan Worrall do an in depth mixing tutorial, I'd pay good money for that, what a pro....

I have seen a lot of tutorials, and I rarely comment on videos's on KZfaq, but this one is one of the best tutorials I've seen. Good speaking voice that's pleasing to the ears, not too much going on on the screen so it's quite relaxing, and a perfect balance between the theoretic part and the practical side of it. And most important; it's so complete that I don't have any questions anymore. Since I tend to watch videos on a topic until I know for sure I've covered all the significant aspects, this is a time saver ;) Dan Worrall you're my hero of the week, and I thank you.

Wow, solid software AND great instructional videos? Fabfilter, you guys continue to impress me... well done!

this is probably the greatest tutorial video of a software company i've ever seen! it's really useful information instead of telling us how awesome your product is like many other plugin manufacturers do! thanks!

Dan is one of the smartest dudes ever, I've never seen anyone make tutorials like him... I wish I could instantly have the knowledge he has and be able to make insanely fast mix decision based purely on knowledge.... maybe one day.

Thanks for englightening me on linear vs minimum phase.. I honestly never knew about this before. Thank you so much and thank you for providing us with the absolute best EQ on the market. FabFilter is an absolute must for my mixes!

I bought the pro q 2 a few days ago, before I really understood all of the possibilities and features. I'm so glad you all have taken the time to make these amazing videos, as should any producer of any plugin, or really any product. These videos are also the reason I will be buying the pro bundled soon. Well thought out video and video series, I had a favorite eq for years and now I have a new one.

You guys make some amazing tutorials with your plug ins. Thank you - from the bottom of my heart!

Really nice to be presented with some actual solid metrics on how each mode impacts phase under different circumstances. Thanks for the effort, what a great video!

Thanks so much for making this video!!! I learnt so much and explains so much of what used to confuse me about eq in my mixes. You are the man!

This tutorial has exactly the information I have been looking for, and applies to more than just rock like many of the tutorials and I don't record much rock so it's very useful! Subscribed! Thank you for the no BS ego free tutorial Fab Filter. I have heard a few mastering engineers praise Fab Filter as a very useful software company which brought me here in the first place, apparently they want us to get a good sound proving their products value, makes sense to me. I'll be spending many hours watching and re-watching these videos until I absorb as much as my brain can hold. I'll also be getting some of these Fab Filter eq's and comps etc. and put them to the test, and expecting good results.

Suuuuuuper work Dan. Thanks for putting the time in to make this.

This is the best explanation I've found on the web for linear phase vs. min phase. Thank you, great video

I always wondered why trying a parallel “air band” made everything sound so thin in the end, it wasn’t because I was adding too much high end, it was because of the phase cancellation caused by the minimum phase EQ! Invaluable info here, wow.

This one totally had so much information I was totally blown away. Thanks Again Dan. Be safe.

It is hard to believe how good these tutorials are!

This is definitely the best tutorial i have ever watched ! Thank you Thank you Thank you Fab Filter and Mr Dan Worral !!!

This answered the most difficult question whether to use Linear phase eq on the master bus or not. Thanks for the video.

Food for thought.Thanks a lot for all these great tutorials!

This is such an artfully produced video. You show make complicated ideas accessible.

This video taught me so much more about EQ's and their phase-shifting than any other video. Also helped to clue me in to VST Plugin Analyzer which has taught me a lot about all the plugins I use.

Love your extreme examples that really shows whats going on! Great work!

Incredibly well done video. I actually started watching this as an embedded video on another page, but had to follow the link to see who the author was. Finding informative, straightforward, measurable results on the application of science toward a subjective endgame is literally the definition of Audio Engineering. Videos like this are immeasurably valuable in that pursuit. Thank you, bigtime.

And again my eyes have been opened by dan Worrall. Thank you very much

Finally the video I needed. Love Fabfilter

wow, I just gather my jaw from the floor now. You make my day.

Finally, we learned how to manage with EQs affecting phase ! And this EQ is really a great tool.... Thank you so much. I'll definately make an even more good advertising of FabFilter :)

You make the best videos in this class man.

I keep coming back here for a refresher Dan is the Man

Good answer. To add to it. those curves I showed in the analyzer are created when the two correlated signals mix together: displaying them for just one of those signals would be inaccurate and misleading.

Thank you so much for linking the practical advantages/disadvantages of these theoretical phenomenon during DSP filter design.

Fantastically informative. I've genuinely learnt something today, thank-you.

This is the most useful video about EQ i've ever seen, really, thank you a lot!!! Recently i've started to play with morphing sounds into one another (like a vocal to a kickdrum and bass) and i faced a lot of issues presented here while EQ-ing but had no idea why they happened... you just saved like 10 ideas i started and was so frustrated about them i wanted to throw them out, but now i think i know the solutions.

Damn. Great video! A side from the eq phase topic I really like the way the bass and kick drum was gluead together creating that beautiful low end in the mix.

Can't wrap my head around to how to mix/blend real + sampled kick tracks when EQing 2 tracks independently before summing to a kick bus (and then add more processing) I made sure both tracks were visually time and phase aligned. Then I was forced to downmix the two tracks to save some CPU, and started going crazy. In the resulting waveform, both kicks had moved slightly in time, creating a strange and longer waveform. I had made sure that the recorded kick was time/phase aligned with the overheads (did the same with the rest of the drum tracks. In fact, I've become obsessed with this lately), and now everything was all over the place because of individual eq processing. I am 100% sure it is not a latency compensation issue. When mixing down/freezing tracks, my daw compensates for plugin latency automatically. So I decided to mixdown each track individually to see what was going on. Zero phase eq processing created a 3x longer kick on each track (because of different frequency phase missalignment, I guess), and linear phase created lots of pre-ringing and missing transients. The less destructive setting was linear phase in "minimum" setting, but still had issues. All of this considering I was using a sample kick sound that was nothing like the recorded one, except for adjusting the pitch to match the fundamental note. I got rid of HPFs and LSFs I was using to polish low end, and things started to improve a little. Then applied those filters back in the kick bus afterwards, and things kind of started working again. But now I'm not confident anymore about the kick staying phase aligned with the rest of the drum tracks (specially OHs) unless I bounce the bus output to audio and compare the timing to the overheads. And that's a bummer. If I've understood correctly how this works, despite of visually aligning the recorded audio tracks and its transients, heavy eq processing can missalign back the timing of frequencies separately, and the only way to make sure everything's ok, you have to use your ear, or bounce the individual/bus tracks to audio after processing to re-check the alignment before summing in a drum bus. My final thoughts: the best you record things and the later you process drum tracks after summing, the better. There's only so much correction and tweaking you can do before things start to get all oven the place and out of control. I really struggle to get things right when I receive badly recorded tracks for working on a mix. I feel like I spend 90% fixing the impossible before I can even enjoy the process.

Thank you for the eloquently spoken, in-depth explanation.

i love these fabfilter tutorials. Dan Worral is cool as

Explains this better than I could have ever tried.

Thank you so very much for these amazing tutorials! I have learned so much from your videos. Much Respect for your knowledge! You are just amazing!

Finished watching. Awesome video!!! Thanks a lot for that!

this is mindblowing, so glad I finally looked up what linear phase eq means

Lots Of Thanks for this , this removed so many misunderstandings for me !

OMG.. mind blown! will have to watch this a few (hundred) more times! Thanks for the vid!

the science of EQing... thank you so much! After watching all of this the question is now: why can't the Pro Q show us what's really happening? It would be super cool to have these Analyzer slopes drawn into the Pro Q interface - this could avoid these "wtf is going on" situations :)

Fantastic explanation! Highly educational stuff!

wow this is incredibly explained. Thank you so much. I have always been confused by what phase means and now i can start to understand what it really means

This is really great info. Thank you! And I love your plugins!

thanks Dan, so well explained and very helpful!

Great job Dan Worrall! It is good to know that non-linear EQs create those huge phase shifts, particularily, when using steep slopes. Linear phase EQs seem to be best used on the final master bus to cut, using a steep slope, the very low frequencies of the track (below 25/30/35 Hz).

Incredibly detailed tutorial! Thank you so much for making this!! Regarding the pre-ring demo @ around 3min, I'm still a bit confused about two aspects of that phenomenon: 1. From what I could gather, my understanding of pre-ring is that it is simply an "incorrect, early start" of the processed audio, relative to the original, unprocessed audio. Further, this "early start" displacement is caused not by the EQ itself, but by the DAW improperly compensating for the plugin's delay. In other words, my understanding is that if I were to just drag the printed audio of the "Linear Phase" waveform (i.e. the image at 3min) to start where its departure from the zero crossing should begin (i.e. departure to begin at the cursor where the above "Minimum Phase" waveform begins), wouldn't Linear Phase then be "flawless"? Though, based on the visual differences in the resulting waveforms @ 3min, I'm assuming the answer is no, and that there is something about this Linear Phase's delay and its compensation that is actually warping the original signal (and not just globally displacing it). It is this "warping of the original signal" that I can't wrap my head around. Can anyone please help me understand what is going on? 2. My second confusion is in regards to these differences in the two resulting waveforms shown @ 3min: Visually, it seems like the high frequencies that form the attack of the kick drum in the "Minimum Phase" waveform are nowhere to be found in the "Linear Phase" waveform. - Does Linear Phase processing somehow result in "lost" original frequencies? I'm really confused. Any clarification would be greatly appreciated!

Great demonstration. Explained it very clearly. Thanks

That is a good, professional narration.

Blimey Dan, I certainly shut up and listened to that, so much technical depth. Certainly put me in my place on the Linear Phase EQ learning curve - basecamp. Easy to listen to and well explained. Worth a revisit, me thinks

Brilliant explanation, thanks Dan!

The best video on the subject.

Banging track. Super useful level of detail. Much appreciated 🖖🏼

I'm exited for you next upload, quality video 🔥❤️

Amazing explanation of all settings and diagrams.

Great tutorial! I had no idea that non-linear phase EQs had that much of an effect on the phase of a track!

Absolutely fantastic tutorial!

Thank you !! Best tutorials ever!!

You're best, thank for your tutorials! It feels like free top-notch university lecture :)

Thanks for taking the time to put this together. This is great content. I've been working on a mix for a friends and I had everything sounding pretty good, but made a few tweaks of the EQ and walked away from the mix. When I came back the mix had lost low end and nothing I did would fix it. I thought maybe a phase issue. Based on your video I'm going to go back and reassess all of my EQ moves. Again great content... Do you do a news letter too? I just subscribed to your channel.

Amazing video! What I was looking for on phase shifting.

Quality tutorial right here, thank you!

This video was extremely well directed and very informative. I am also sure from the accent that the narrator is a badger named Reginald and he can cook Shepherd's pie just a well as he can make music.

Thank you for another awesome tutorial!

Brilliant explanations. Thank you.

Very well explained. Thanks!

Very clarifying demonstration.

Bloody fabulous mate! Carry on!

best vid ever on the topic.

This explained so much Thank you

Fabsolutely excellent explanation!

totally awesome vibetown

Thank you for this awesome tutorial

fabfilter has the best narrator ever. That's how you present and explain your product. Watch closely NI.

Impressive tutorial, thanks!

Thank you very much! Great video!

As usual: superb.

This is super helpful. Thanks!

This is amazing! Not a substitute for spending loads of time to really understand what minimum phase and linear phase are, but it's a great collection of experimentation and application examples for engineers already familiar with the concepts.

I just learned so much. Awesome.

this is brilliant! this explains a lot!.

this is pure gold.

Brilliant tutorial!!

5:20 I can't believe one of my favorite DAWs, Reaper, still calls it "invert phase", when what you're actually doing is inverting the polarity. Even FL Studio got this right!

tons of good info, thanks!

thanks Dan, awesome without compare, as usual!

I had suspicions, that EQs do something to the phase (FL Studio's built-in EQ 2) either adding a delay to process a signal window or butchering the phase of the signal. Really, built-in EQ did both delay and phase change, so I had to add equal amount of EQ for each guitar IR track, I had to equalize the number of EQs to save phase relation. Yet, just to make sound better I added artificial delay to IRs (3-10 samples at 44.1) to get the low back in line, but still, that was a revelation at least.

I'm really impressed, really awesome

very enlightening. thanks!