Should be painting all the exposed metal before assembly... Going to be a rust magnet...
@Blubicon2 жыл бұрын
Great point. I did spray all of the parts that I cut off with the wheel and sawzall.
@jaysongilbertson1012 жыл бұрын
How did you correct you geometry now that you have your track bar at such a steep angle? You always want you track bar level when sitting on the ground.
@Blubicon2 жыл бұрын
Adjustable rear track bar, so I just lengthened the track bar to keep the rear axle centered. I understand the angle being steeper but after the removal of the track bar bracket I didn't ever notice a difference. Finally 2 years later I installed a Rubicon Express track bar bracket to raise the angle since that model works with the Evo brackets. Still don't really notice any difference though.
@jaysongilbertson1012 жыл бұрын
@@Blubicon Thanks for your reply. The only issue I am aware of is that when TB is not horizontal the axle swings out further to the attached side at full flex.
@Blubicon2 жыл бұрын
@@jaysongilbertson101 I suppose on certain builds that could become an issue. It was never an issue for me. Got lucky I guess =)
@beachboy49283 жыл бұрын
Nice! Did you have to get shorter rear sway bar links, shorter rear shocks, or add/remove rear bumpstops?
@Blubicon3 жыл бұрын
none of the above.
@rockhumper88434 жыл бұрын
Don’t mix an max lift products 🤦🏽♂️🤦🏽♂️🤦🏽♂️🤦🏽♂️🤦🏽♂️
@Blubicon4 жыл бұрын
Huh?
@rockhumper88434 жыл бұрын
Match not max
@austingraham68263 жыл бұрын
I did why not lol 4.5 MetalCloak same bracket as he has. cut it a bit welded it to the evo bracket all done no point sticking with one brand got to pick the best parts of them all