Extreme Resin Stacking 3D Prints

Extreme Resin Stacking 3D Prints - This is wild!

Рет қаралды 237,616

Күн бұрын

I think I've gone too far. This might be the coolest & dumbest thing that I've ever attempted to Resin 3D Print. Crystal Dragons using Resin Stacking
Thanks to Elegoo for Sponsoring today's video ➜
Elegoo Saturn ➜ geni.us/ABTdtjm
Elegoo Mars 3 ➜ amzn.to/3CQqkTN
Elegoo Mercury X Bundle ➜ shrsl.com/33ha6
Elegoo Neptune 2 ➜ geni.us/2MWuj
Elegoo Mars 2 Pro ➜ geni.us/erkc
Elegoo Mars ➜ geni.us/GGUV82l
Elegoo Wash & Cure Station ➜ geni.us/hgyLGW
Elegoo ABS Like Resin ➜ geni.us/Lb9kl
Elegoo Washable Grey Resin ➜ geni.us/Ufg4
Thanks again to ‪@3DPrintedProps‬ for stopping by!
3dprintedprops...
MY PATREON / My Resin 3D Printer Settings ➜ / unclejessy
Make your own Resin 3D Printing Timelapses with Resinlapse ➜
resinlapse.big...
Wham Bam Slap mats save 15% with code UJ2021 ➜ whambam3d.com/...
Crystal Dragon by Cinderwing3D
cults3d.com/en...
Eastman's 89 Batman ➜
/ eastman
Doses3D Joker Bust ➜
/ doses3d
Tiktok
/ unclejessy4real
/ filamentstories
/ pinklumenade
/ grizzlednome
________________________________________________
Interested in other resin 3D Printers?
Peopoly Phenom ➜
www.matterhack...
Epax X10 ➜
epax3d.com/pro...
Elegoo Mars ➜ amzn.to/2xvAJVr
Anycubic Mono X ➜ geni.us/dmQqQ
________________________________________________
Some Additional Items you will want to consider for Resin 3D Printing ➜
Full List - www.amazon.com...
Disposable Gloves - amzn.to/2Xjaxfo
Plastic Spatula - amzn.to/2Ijrhuy
Metal Spatula - amzn.to/2XgiHoS
Isopropyl (IPA) - amzn.to/2KoTsdY
Pickle Container - amzn.to/2KkWsrH
Funnel - amzn.to/2IjrrCa
Paint Filters - amzn.to/2XcpK1V
________________________________________________
Interested in getting a 3D Printer? Here are some that I use ➜
Ender 3 amzn.to/2GcCECB
CR-10 amzn.to/2Id9o1T
CR-10 S4 amzn.to/2UgWMbL
TinyMachines3D.com
www.tinymachin...
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoff...
_______________________________________________
Gear I'm Using ➜ www.amazon.com...
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
KZfaq ➜ / unclejessy
________________________________________________
Thanks for watching!
SEND STUFF TO ➜
Uncle Jessy
PO BOX 629
25 Goodburlet RD
Henrietta, NY 14467
#3DPrinting #Resin #UncleJessy

Пікірлер: 354

@UncleJessy 2 жыл бұрын

If you're brave enough to attempt this for yourself you can find Cinderwing3D's files over on Cults3D cults3d.com/en/3d-model/art/crystal-dragon-articulating-flexi-wiggle-pet-print-in-place-fantasy

@cinderwing3d 2 жыл бұрын

Wow!! Thank you SO much for trying our Crystal Dragon! I really appreciate it! I want to also give a shout-out to Online Handle "Red Syns" for the amazing work in turning our original Crystal Dragon into an incredible coiled resin print! :) Thank you!

@UncleJessy 2 жыл бұрын

@@cinderwing3d seriously amazing job on this one!

@tmilker 2 жыл бұрын

@@cinderwing3d Can you add one that's not so long? Maybe stops at the second row?

@israelmartinez4097 2 жыл бұрын

I’ll take that support tree that failed. It looks dope

@JVelez1971 2 жыл бұрын

@@cinderwing3d So where is the super long stacked file? Is it included in the regular download when we buy the Crystal Dragon? Or is it a different download/purchase??

@b8264d 2 жыл бұрын

Very impressive! This could make jewelry casting much more efficient. Can you imagine how many rings you could print in castable resin using that technique? Thank you for sharing!

@UncleJessy 2 жыл бұрын

Welp, I now have that in my todo project notes!

@stuartmurphy5138 2 жыл бұрын

@@b8264d im Tempted to attempt the dragon on mine

@b8264d 2 жыл бұрын

@@stuartmurphy5138 I would love to see the video if you do decide to do it.

@mykel4661 2 жыл бұрын

Who would you take the resin casts to so you can make jewelry? I was actually trying to find how to start making jewelry with 3d prints, I'm in San Antonio

@b8264d 2 жыл бұрын

@@mykel4661 I’ve been wondering about that since I posted my comment. I forgot to take in the size of the final print. It would probably be to big for the typical home forge.

@JohnClark-tt2bl 2 жыл бұрын

Really cool prints, kinda hurts knowing how much resin gets wasted on the supports though.

@fredjoss9551 2 жыл бұрын

For you struggle on removing support without dipping them in warm water, what i do is soak them in room temperature water a few minutes or longer depending of the thickness. Works well on water washable resin before curing. The resin is not brille, still a bit flew and soft, cold/room temp water dont alter the print and i get less support mark then after curing or warping with warm water.

@adamswitlak1242 2 жыл бұрын

I didn't use the water washable resins. Can you recommend the good ones?

@fredjoss9551 2 жыл бұрын

@@adamswitlak1242 eryone grey if you can get it, thats the best one in water washable

@chungnun4948 Жыл бұрын

@@adamswitlak1242 I have been using JAYO water washable, its my favourite resin in general

@theherrdark4834 2 жыл бұрын

That would make an interesting tree garland for Christmas, especially for a theme tree.

@ethansdad3d 2 жыл бұрын

Brilliant use of resin stacking. I love the red resin dragon.

@RedSyns 2 жыл бұрын

Glad to see my mod being showcased! Super exciting as a newcomer to the hobby!

@CdoGtheGreat 2 жыл бұрын

Wow, you have those printers dialed in! 11 hours still seems super fast for a full build volume print. I am used to my mk3s but just got my mini 8k. First resin printer. Will need to print that serpent

@marsgizmo 2 жыл бұрын

these are just incredible! 👏😎

@UncleJessy 2 жыл бұрын

Thanks homie!

@derekeet47 2 жыл бұрын

All the good 3D printing KZfaqr congregate in this comment section

@jg3d591 2 жыл бұрын

Can I have the file for the long dragon pls

@shuvidola752 2 жыл бұрын

Honestly i think the red dragon would look amazing inside a resin table with backgrounds and everything inside

@PheonixKnght 2 жыл бұрын

I would love to see them make versions for the Saturn and Jupiter to save on resin and im thrilled you printed it on both.

@kennykd97 2 жыл бұрын

He' s killed it with this model since you put it on your channel it went around faster than a new strain of covid.

@fablabmakerhub 2 жыл бұрын

I'd be interested in seeing this printed in a flexible rubber-like resin as this method of printing would make for some really cool fashion accessories like belts and scarves.

@crisshank468 2 жыл бұрын

I tried to print this and it turned out great except for the very top of the head didn't print. When I took off the supports, I ended up breaking it in 3 places. I would have loved to see more detail on how your removed the supports.

@piratajimenez 2 жыл бұрын

I had the same problem, I broke 5 links in the figure, I don't know how to take off the supports without braking the links of the dragon

@RaG3PlagueDr Жыл бұрын

The last like 10 links in the tail end up fused for me even at dangerously low exposure times

@l.r.designstudioslauriesul8993 2 жыл бұрын

That resin is really beautiful- love the color

@essex0chris 2 жыл бұрын

Hope your eye is OK Jesse 🤞

@ayonmetar2301 Жыл бұрын

5:55 You held a life stream of a 3D print? Honestly, in my entire life I have not heard of anything that came so close to watching proverbial paint dry.

@FilamentStories 2 жыл бұрын

Love it! What a great video on resin stacking and of course amazing results with the dragons!

@bitzbox 2 жыл бұрын

These are pretty nuts! Very impressed with how well they printed

@jasonjulian1 2 жыл бұрын

Those bare support structures look like the Crystalline Entity from Star Trek!

@lukas.0_0 2 жыл бұрын

You can turn the red supports into a little roller coaster. Just add some rails and a cart.

@NathanBuildsRobots Жыл бұрын

What an insane print. I think that is the longest 3d print I've ever seen!

@mr.sadlilweeb3557 2 жыл бұрын

that thing on his eye making me feel like austin powers in goldmember "moley moley" can't focus on the video hahaha

@TheMidnightSmith 2 жыл бұрын

Almost 2kg of resin! Woah! Also, for support removal, a cheapo harbor freight heat gun set to medium works just like the hot water trick 😉

@elleofmusic 2 жыл бұрын

awesome! And with that support-nipping bit I think you invented ASMR Nightcore 😯

@erwinz5926 Жыл бұрын

wow.the supports are stiff and the snakes are elastic. interesting stuff.

@jinkxkng 2 жыл бұрын

cant wait to see them custom painted lol

@kameroc 2 жыл бұрын

So freaking cool, man! Could you cover making flexible stamps, like rubber ones, and hard ones for leather in both resin and FDM?

@demented6996 Жыл бұрын

Miss opportunity on the Sesame Street Count Dracula laugh as you was counting feet!

@HenriDP 2 жыл бұрын

You should take the blue coil dragon and put it in the red dragon supports

@powderedtoastman-boogas9445 7 ай бұрын

Got something on your eye lash, I dont know how it’s not driving you crazy! Awesome print!

@AtomsLab 2 жыл бұрын

Those red supports remind me a bit of the castings people do of ant hills. Super cool structure! And great job on the prints and timelapses, those dragons are so cool.

@MrCow579 Жыл бұрын

As someone who sells stuff on etsy and fiverr: stacking saves me a BUNCH of time.

@TAiiNE 2 жыл бұрын

What if we want the smaller dragon, but at a decent size? Could you request a 'stacked' version of that one so we can have a larger one?

@baileyrahn266 8 ай бұрын

That is the coolest eyelash!

@lizzz3ard 2 жыл бұрын

Tip: when not using a flex plate, put some IPA in spray bottle and spray the IPA on the scrapper, when the IPA get in between the resin and bed the resin part will pop off the plate.

@cami-xq2lz Жыл бұрын

In my first year studying Architecture, we created such complex 3D models from what was initially a project of lines, that just one person (consider that i'm in a huge city with a lot of options) accepted the task of printing our models. Even with this person hability, there was some models that had to be simplified.

@gregorychard 2 жыл бұрын

G'day Jessie I've an Anycubic Photon Mono resin printer with a build volume of 160x80x65. When I do multiple different files, I use fusion 360 and make a frame around different files in the volume of 155x79x64mm. I connect all the files by a 0.5 tubes to each other and to the frame. I export this file as a whole job and place it in my slicer. I then make a 1.5mm bed on the plate and add supports where needed. With my wham bam plate and the supports the height is 160mm. The print takes about 7 hours, but it's faster than the combined time print time if you print them separately. Also you use about 50% less supports compared to single prints to the plate, thus less supports are needed. Also the clean up is quicker and easier. Havagooday Greg

@CosplayKitchen 2 жыл бұрын

Hubs: I want that Me: oh yeah, that would be a fun print and would look good in out living room. Hubs: no, the printer

@DJ12850 2 жыл бұрын

would wrap that thing around the tree at Christmas time lol

@PinkLumenade 2 жыл бұрын

OMG ITS THE LONGEST BOI. I even opened yt for this and I don’t even mad I love it

@Beateau 2 жыл бұрын

That red is amazing. I love it. I need it.

@dexterm2003 2 жыл бұрын

Could you print a long FDM version on the CR-30? That would be pretty cool to see.

@TheBlackbirdii 2 жыл бұрын

Whats wrong with your left eye

@Bynming 2 жыл бұрын

Probably poliosis which makes some hair grow without melanin so he has white eyelashes.

@jackdeth245 2 жыл бұрын

Exposure to resin.

@Sopherian 2 жыл бұрын

He has Vitiligo

@bryanfoster362 2 жыл бұрын

Lotta "That's what she said!" moments in this one :D

@kevinvolo5208 2 жыл бұрын

When I saw.that I never thought you'd get it all separated. Awesome video as always. Great getting to hang out. It's been a while my friend. 😀

@CdoGtheGreat 2 жыл бұрын

What is this ? A "Dragon measuring" contest? Haha, jk.. this is awesome

@NoraIconiq 2 жыл бұрын

Damn these dragons are longer than my height.

@Yeah_ItsYou 2 жыл бұрын

Failed??? That's a MASTERPIECE🤩

@NoizieWorks 2 жыл бұрын

Can't wait to dip my hands in to the resin printing hobby!

@MrBizteck 2 жыл бұрын

Wear gloves !!!! 😆

@vampiredildo8192 Жыл бұрын

Oh no don't do that resin Is toxic ! ... wear gloves first

@JoseAlvarezV 2 жыл бұрын

Hey Im a long time fan! that looks Amazing!

@connormccarter9581 2 жыл бұрын

Dude... this is crazy cool! Congrats on the successful super print!

@gnivler 2 жыл бұрын

You're crazy busting apart supports without safety glasses! (cool vid tho!)

@HuntersOA 2 жыл бұрын

Och man! You are a crazy person! Nice prints! :D

@thered_hood7451 2 жыл бұрын

awesome video! if you don't mind me asking though, how are you not bothered by the resin smell and fumes? i see that you are actually able to work with raw uncured resin without any kind of respirator also, are the kind of resin you use nontoxic or something?

@josiahgoetze210 7 ай бұрын

This is unfortunately a case of not caring. The mask they do wear at one point of the video also don't protect them. What might be more concerning is the fact that they also don't have any ventilation.

@HapaxLegomenon12 2 жыл бұрын

I feel like you could turn the red support structure into some kind of marble run.

@beefknuckles 2 жыл бұрын

5:13 I heard that stealth Bababooey reference! :P

@Vlad2319 2 жыл бұрын

The supports are a dragon tree xD Edit they're both probably an inch longer than listed as they did curve and weren't perfectly straight

@whatyoudo9773 11 ай бұрын

you just cured a bunch of resin into a nasty un-usable rope. The perfect file direct from resin making co's to sell way more resin

@GeneralHowToTutorials 11 ай бұрын

Thank you for using the bottles, the tapemeasure meant nothing to my American brain. But bottles, those units are perfectly acceptable.

@ill_insect 2 жыл бұрын

I would love to do this but I’m broke, I find these things super interesting! 😂

@ashsam2009 2 жыл бұрын

That is awesome! Made me think about printing a whip prop!

@WMBayouLures 2 жыл бұрын

Amazing! A great model and this makes me want my Jupiter NOW!!!

@BrandonsYouTube 2 жыл бұрын

It's still insane to think that only took 13 hours.... FDM would have taken DAYS! lol

@sortofsmarter 2 жыл бұрын

wrap a Christmas in it instead of garland...lol

@quattrocity9620 2 жыл бұрын

Bigger but shorter would be dope

@tiladx 2 жыл бұрын

I kind of want to make one of these in a translucent resin and figure out how to wire small LEDs into the segments without destroying them.

@Will_Huff 2 жыл бұрын

Omg! That was insane! Love it!

@davedavem Жыл бұрын

Definitely going to do this!!

@xx_sadcube_xx 2 жыл бұрын

Being the like that made it 1k feels great. Love your content, you deserve more likes! ❤️

@Nicks3D-dimension 2 жыл бұрын

This is so cool! Really enjoy your videos and also ordered myself a Jupiter a couple of days ago. Thanks for the awesome info and the tips

@alexcashmore 2 жыл бұрын

So excited for my jupiter this year!!

@williamchamberlain2263 Жыл бұрын

If you're doing miniature figures you could teselate them so long as you can find or make a couple of attachment points on the top of the inverted figures.

@tenchuu007 2 жыл бұрын

The supports are clearly to be used as a marble run.

@Dr.RatioSnail 2 жыл бұрын

I'm just here for the dragons. I love dragons

@kajn3206 2 жыл бұрын

it's almost unbelievable printing maybe I'd like to come up with some automatic additions for even smaller printers

@hoosegowindustries9047 2 жыл бұрын

Awesome job bro 🤘

@Lemming1970 2 жыл бұрын

purchased the file. Cool file.

@stephenrendall 2 жыл бұрын

Hey Uncle Jessy, I have terrible warping in my resin prints, i would love to see a video on tips to reduce or prevent this from happening. If youve already done something similar could you point me in the direction of the video? Thanks my man!

@vulcan2255 Жыл бұрын

What I think would be cool is if you printed the dragon in blue on the Jupiter and placed the blue dragon on the red supports and vice versa

@3DMusketeers 2 жыл бұрын

Oh man that fail HURTS! Make sure you wash your arm from that raw resin exposure (mind you, you likely already knew this..) WOAH that resin print is MASSIVE! How much material did that use?!?! Talk about support ASMR. Great project print, wow! Pretty cool!

@357Dejavu 2 жыл бұрын

Super excited for this one. Would love to see it on the Jupiter! Edited… nm I see you did!

@bigchrisky7031 2 жыл бұрын

Bought and attempting the print!! I have the other flex dragon resing printed in a little one and a bigger one off my saturn

@TheBeddu 2 жыл бұрын

Wow, how did it take you only 9 hours? It took me 14 on my Saturn with very non-conservative settings!

@jtgarcia181 2 жыл бұрын

Wild af

@marksullivan7766 2 жыл бұрын

Amazing build 🤠 gonna have to try it

@divinegrunt0375 2 жыл бұрын

The supports after you removed the dragon might’ve just been cooler than the actual print

@cnc-maker 2 жыл бұрын

Well, you have new some Christmas ornaments. 😳

@banhammer7243 2 жыл бұрын

That freaky eyelash lol

@Telmuun1 Жыл бұрын

Seeing this I need slightly clear colored resin for just looks and normal grey resin for painting

@jweavis 2 жыл бұрын

That's amazing!

@CJ-ur3fx 8 ай бұрын

5:34 that's why you should confirm EVERY print you do with UVTOOLS first.

@PaulDominguez 2 жыл бұрын

Very cool. Make a blue one same size as the red. Then wrap around arm. Red arm dragon and Blue arm dragon

@sikuvermillion 2 жыл бұрын

I wish you was my dad , stuff you make is cool

@ronm6585 2 жыл бұрын

Very nice, thank you.

@Mehorai Жыл бұрын

So for the red support you could make some flexible like train tracks and maks a rollercoaster thing

@d-not-u Жыл бұрын

Amazing videos.

@torymiddlebrooks 2 жыл бұрын

At my work we use a Form Labs Form 3. They sell standard black resin for 150$ per L, that's .15$ a gram and we charge .25$ for cost. That failed print, which we couldn't charge the customer for, would be 136$.