Рет қаралды 5,148
Please turn on your language subtitles!
Hello, this is Kynosys.
I've created a rare type of dust collection system. I think it's going to be very useful.
I bought a purification filter on the market and used it.
It is a fan-type centrifuge filter made of the same size as the wings of a regular fan.
All you have to do is take off the fan's wings and insert them into it.
When the fan is turned on, the dust collection filter rotates to blow the wind in the direction of the wing tip.
From the front of the original fan, the filter takes in the air and releases the air in the direction of the wing tip. At this time, dust passing through the filter is collected at the edge of the filter by centrifugal force. It collects fine dust, not large dust like a giant dust collector. If you remove the filter after using it for a certain period of time and clean it with an air gun, you can use it semi-permanently without changing the filter.
If you put the wings of the fan you removed back in, you can use it like a conventional fan.
When I used it in the workshop, it was confirmed that it showed excellent dust collection ability.
After a few hours of playing, I could feel that 90% of the wood smell in the workshop disappeared.
We can of course confirm this by looking at the dust gathered in the filter.
It's the best dust collection filter for a cost effectiveness.
I hope you can use it, too.
Thank you.
#DIY #Dustcollector #Fan #woodworking #woodwork #making #Howto