Faxon 8.6 BLK Update - Does the Gas Bleed Off System help?

Рет қаралды 2,040

Жыл бұрын

In this video we explore the changes a Gas Bleed Off System makes on the previous issues we experienced with the Faxon 8.6 Blackout. It's interesting what a difference a small hundred dollar system can have!
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including KZfaq) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. We do not endorse any specific product and this video is not an attempt to sell you a good or service. We are not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. We DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.

Пікірлер: 17

@ShadowAviator 8 ай бұрын

I would be tempted to check and see if that old gas block was installed correctly. Also, I don't remember you mentioning this method in the video, so I will comment on it. One way to check gas port alignment when installing a new gas block is to flip the gas block upside down. Usually one of the set screw holes lines up perfectly with the gas port hole in the block, thus you can line up the gas port in the barrel with the set screw hole in the block and check to see how much gap is needed. Then spin the block upright and try to maintain the gap. I hope I explained that in a way that makes sense. Oh, I don't know if you are interested in an ammo source, but I believe Aitken Arms is making 8.6 BLK ammo. Looks like they are making subs and supers. Thanks for the video!

@nighthawkbomber Жыл бұрын

Hey guys good video about the 8.6 blackout! There's just a couple things off in the video for information surrounding bleed off. The bleed off is not at 4 full rotations or 16 clicks, it's after 18 clicks(at least on my model). The superlative arms system is the best adjustable gas block on the planet right now and it's great for any caliber. But with only 16 clicks it's going to be running at about normal gas settings. Based on the video tests done, either the original gas block wasn't sized right/was defective, wasn't installed correctly by the factory, or shooting in different atmospheric conditions caused the gun to perform worse/better depending on how hot/cold the day was. The 8.6 is still experimental and videos like this help the community better understand what works/what doesn't and you guys should keep doing these tests in the future!

@chopperdoctoraruba275 Ай бұрын

You said with 18 clicks of the adjustable gas block it solved the ejection problem but 18 clicks is the same as the stock gas block, fully open and not in bleed off mode. 18 clicks fully open 1-17 clicks Restrictive mode. 20-48 clicks is Bleed off mode. Read the Superlative instructions.

@kjtrwarhead 11 ай бұрын

Thabk you for making this video its amazing.

@danjackson8145 Жыл бұрын

The team provided a great description of the failures, perceived driver and testing of an implemented solution. Thank you for sharing with the community! While I'm very interested in the 8.6, I'm not an armorer and I will be waiting for Faxon to demonstrate it has fixed the issue rather than buying a problem and hoping to fix it myself.

@hawaiiangunner 11 ай бұрын

I can't believe out of four of you guys not one of you reload ammunition.

@mwmag 11 ай бұрын

Right. 2 of us have all the equipment just can't find the time.

@EastTexasOutlaws Жыл бұрын

Good info !!! I have a barrel on backorder for a build, upper, lower, handguard and mags are getting cerakoted tomorrow

@JohnSmith-cw9pf Жыл бұрын

The factory gas block wasn't aligned correctly.

@mwmag Жыл бұрын

Very likely. Thanks for watching.

@robertjackson1407 Жыл бұрын

Thank you 😊

@alaingarcia4756 Жыл бұрын

Why can't it come from factory with that adjustable block already 🤷‍♂️

@mwmag Жыл бұрын

100% agree. At that price it should. Thanks for watching.

@mafbloggerdanny Жыл бұрын

so is your conclusion that the rifle was assembled improperly or is it just under-gassed when using the supplied gas block? I'm doing my own 8.6 build pistol build right now with a 12" barrel and I still haven't chosen my gas system parts yet. I really like the concept of the superlative bleed off, but shooting suppressed isn't a huge priority for me I'm just doing the build to make a powerful but super compact hunting pistol for mule deer

@mafbloggerdanny Жыл бұрын

also any other considerations that you think are important for planning an 8.6 build? such as buffer weight and spring?

@mwmag Жыл бұрын

Can't really say for sure since we reviewed only one gun. If anything, the new adjustable gas system has helped. Buy if you're not concerned with suppressed then it won't matter as much. But better to have it and not need it. Also consider a heavier buffer, but again it's really a matter of testing and adjusting since each gun is its unique result. Hope that helps. Good luck. Would love to hear how it comes out.