Flight Training - making power loops easier

Рет қаралды 9,452

6 жыл бұрын

More discussion of camera angle this time for freestyle and the power loop. Specifically looking at how the higher camera angle can give you more time and more information to fly a tighter line around an obstacle and allow you to position your quad more accurately. At the end of the video I apply the same knowledge/technique to a racing power loop.

Пікірлер: 16

@reptethetetlen 6 жыл бұрын

I just love these training videos! Can you please make one on how to do tight slaloms between gates perhaps? I'm fairly confident with u-turns/hairpins, but I really struggle when making tight turns sequentially while having to maintain height at the same time...

@Velocidrone 6 жыл бұрын

I was only teaching someone this a week or so ago. I'll see what I can do.

@reptethetetlen 6 жыл бұрын

Wow! I can easily see a popular demand! :)

@Titanfinger 2 жыл бұрын

Very nice Tutorial, i just thinking about: How useful would it be if the camera is ajustable during flight with a servo. Imagine if the quad is upside down the gyro tells the servo to tilt 15° more upwards until the Quad has a flat angle to the ground.... ;)

@bugsysiegals 4 жыл бұрын

I’ve got my PC in the basement and 50 ft HDMI running to my living room TV ... rather than running a USB extension, is there a way to connect a Rx to the PC so I can use my Tx without wires?

@bzfpv5311 6 жыл бұрын

You make it look too easy 😁. I'm still stuck on 30 degrees because anything more is too fast for me when flying close to the ground😞

@Velocidrone 6 жыл бұрын

It will come with time. Higher camera angles tend to result in beginners flying into the ground. I'll do another video on this at some point and how you deal with that.

@bzfpv5311 6 жыл бұрын

VelociDrone Yes, I do fly into the ground sometimes at over 40 degrees

@Velocidrone 6 жыл бұрын

It' all to do with learned behavior that you need to break and then it won't happen anymore. Anyhow, I'll exp[lain it in the forthcoming video ;-)

@bzfpv5311 6 жыл бұрын

VelociDrone I wish I would've learned with velocidrone and not a tiny whoop. You're right, I picked up a lot of bad habits. I will highly recommend this to anyone wanting to get into the hobby👍👍

@meralharbes 5 жыл бұрын

Great video as always! ~~How do you change your camera angle so quickly? Using PgUp and PgDown I can only do it step by step, having to let go of the button every time. I assume you assigned an axis to "change angle" in the options menu, but are you using another analogue controller to do it?~~ Edit: kzfaq.info/get/bejne/rrKAg8yZmNy4d6s.html and 5:50 For anybody else looking for it, use a dial if you have one on your tx!

@Velocidrone 5 жыл бұрын

Assigned camera angle to a dial on my taranis

@meralharbes 5 жыл бұрын

@@Velocidrone Thanks for the reply! Sorry to bother you again, but I have a weird issue now that I'm using more than 7 channels. It seems that the buttons are not being recognised. Windows shows them, but Velocidrone does not let me assign them. It does read them, I can use them to interrupt the 5 second timer when assigning a control, but I can not set them up for them. Two switches I'm using that register as "slider" in the game controller properties work in Velocidrone, but the ones that register as "button" only work in the game controller properties.

@Velocidrone 5 жыл бұрын

@@meralharbes buttons are not supported until the next patch...very soon.

@meralharbes 5 жыл бұрын

@@Velocidrone Thanks for letting me know! I just downloaded the patch and bound all the buttons effortlessly, awesome job! Great patch changelog. You (and your team?) rock! Edit: The wind simulation is awesome!

@Velocidrone 5 жыл бұрын

@@meralharbes thankyou