Ford 6.7 Powerstroke INTERNAL CATCH CAN

Ford 6.7 Powerstroke INTERNAL CATCH CAN - NO MORE OIL DRIPS!

Рет қаралды 47,441

3 жыл бұрын

POWERSTROKE STAGE TWO KITS HERE: bit.ly/stage_two_kit
POWERSTROKE STAGE ONE: bit.ly/STAGE_1
New cool part for the 6.7 Powerstroke! Internal catch can to eliminate oil from escaping through the Crank Case Vent!!
Get Internal Catch Can HERE:
bit.ly/CATCH_CAN
MY TURBO KIT:
bit.ly/TURBO_KIT
GET YOUR POWERSTROKE PARTS HERE:
bit.ly/606whp
Follow my instagram:
bit.ly/COREYINSTAGRAM
The Best Foam Canon
amzn.to/333Drkd
Pressure Washer
amzn.to/2xGl6xW
Iron Remover
amzn.to/2R6g58D
My soap
[TOP SECRET] for now
Clay Bar I use
amzn.to/2R7lZ9D
toyota
cars
JDM
Supra
2020 supra
mkv
a90
b58
ford superduty
f250
diesel trucks
moderndieselcorey
Corey vlogs
diy install
6.7 powerstroke
diesel straight pipe
lifted trucks

Пікірлер: 102

@flyingfarmer92 3 жыл бұрын

Thanks for the great content, Corey! I appreciate good, clean KZfaq channels that I can watch with my family in the room and not worry about profanity. Just came across your channel a couple weeks ago and I have already started ordering SPE parts for my 2018 6.7 power stroke! Doing full delete and tune next week. Keep up the good work.

@ryanbrown918 3 жыл бұрын

Awesome idea...Dan knows his stuff and is quite creative with his products. I really respect what him and SPE are doing in the 6.7 PSD market, as they really think outside the box compared to everyone else.

@COLTSWAY 3 жыл бұрын

I’ll have to get one for sure. Love your channel man, it inspired me to start my channel about my 6.7. 🇺🇸

@RyanMr6.7 3 жыл бұрын

SPE has been great to me! Next up for my 6.7 is a new SPE intake kit and Ez Lynk tunes. Whoo hoo!

@JaydenBlakley 3 жыл бұрын

I love your truck this is definitely the next truck I’m getting 😍

@six0bros 3 жыл бұрын

I'll definitely be getting one when I do the piping kit

@carls2210 3 жыл бұрын

I have the internal catch can just waiting on the CCV reroute to get back in stock to ship. SPE is the leader in powerstroke parts. Everything under my hood is from SPE so far. Next up is the emporer system

@betterthanideserve76 2 жыл бұрын

Pusher, the company who makes those amazing intakes, they make a coupler that connects to your stock ccv box outlet tube and comes with a 1 inch 6ft hose. So you dont need to remove yours ccv box unless you have the filter model. The new filter less model is a catch can then you connect your outlet hose to the included coupler to the one inch hose, then you cap off the intake. Done in less than 20 mins and you have a catch can. All for $32

@Danny19761978 3 жыл бұрын

you should've cleaned the frame and surrounding area really good, and did a 6 month review. I was thinking about putting this on my truck

@jerrywafflers6720 3 жыл бұрын

That stuff works, mine does little drips, Smokey and when I installed it no more oil drips or Smokey.

@jaxsonbollinger 3 жыл бұрын

Hey man. I live in Export,PA. I’ve seen you drive through when you were going to SPE. If you ever need firewood, I’ve got you covered.

@hotshothauler Жыл бұрын

Awesome video thanks

@_WELDR_ 2 жыл бұрын

Love all your vids , but dang man I wish I had a buddy like Mr. Snyder 👍🏼 my new truck would also have every SPE part also 😁

@justinfannon8159 Жыл бұрын

just installed this on my 2015. love the look. install was fairly easy, (only minor swearing). Is the white haze normal?

@rickjohn5780 3 жыл бұрын

Wanna see more of the powerstroke and how your liking s370

@alex_5.sl0 3 жыл бұрын

Yoo corey when is the piping kits coming out from spe ? Wanting to buy a kit asap !

@keithjohnson900 3 жыл бұрын

What happened to the cap that was on the end of that hose they come with a fancy plug does it plug up or something I was wondering about that

@thefartdart Жыл бұрын

Just had a ford Teck tell me that I will lose turbo seals by deleting my CCV. Thank you for addressing this

@Semperfi070 2 жыл бұрын

Great video corey, I don’t see the link for the kit w/cheese grader

@acmanwwjd1 2 жыл бұрын

I have that catch can on a 2016 however on a 2015 and 16 the CCV had a sensor how do we get around that ?

@gsolo328 10 ай бұрын

Has this helped with the reduction of smoke?

@derrekfinlay9324 3 жыл бұрын

what oil do you use and recommend ??

@zMrPlatinum 3 жыл бұрын

Do you have a lift on there or just wheels and tires and what size wheels and tires ?

@stanpeach866 Жыл бұрын

why not just plug off the turbo side and an oil hose to the factory box? The factory box is likely going to provide more separation than no separation? Thoughts?

@6doorshopdavid980 3 жыл бұрын

I need that oil heater how much would you sale it for?

@jaredhardage6400 3 жыл бұрын

When is SPE gonna start selling their piping kit that will fit with a S&B cold air intake?

@nombr Жыл бұрын

Good vid, how has it held up? Any chance you have a discount code for the site?

@jballll 4 ай бұрын

I installed this two days ago and on the first drive had a little oil still dripping. Did the ccv delete at the same time so wasn’t oil that had been in the line previously. I’m just gonna install an external catch can.

@jasonwilliams5757 Жыл бұрын

So if using the spe kit and lightened exhaust, would the truck need a tune to operate properly? Thanks!

@johnathonwillman6682 2 жыл бұрын

Can I add a Venturi and the catch can if I don’t have a CCV reroute?

@ericwachel3146 3 жыл бұрын

Does this throw any codes?

@ALUMNI2K 3 жыл бұрын

No tune required?

@parales03 Жыл бұрын

Brooooo clean that shit up lol I see that intake manifold upgrade 🙌🙌 have you seen improvements overall with that manifold ?

@TheHaggertonFamily 2 жыл бұрын

So running this product does that make it safe to re attach the the ccv hose back to the intake of one wanted to no longer have it vented to atmosphere? Reason I have these questions is I understand what you mean when you say it drips I noticed between oil changes I lose about 1qt to 1.5qt but I idle my truck on location for about 12+ hrs a day I have it routed to the exhaust but kinda getting tired of it hazing outta exhaust was wondering if it would be safe to route it back to Intake but with mine being an older model 6.7 they have a higher amount of crank pressure then the 15+ was wondering what your input might be I appreciate it!

@jballll 4 ай бұрын

Mine still leaks and it’s leaking at the crack case itself when driving and I made sure to install the o-rings supplied with the kit so it’s not that. Maybe the bolts aren’t long enough to give it a good seal idk

@AntonioHernandez-zo6kr 10 ай бұрын

What tune you have on your truck I have 2017

@gradoisx2348 4 ай бұрын

Whats your personal prefrence on reroute kits?

@Whatisgoingon-od9yb 3 жыл бұрын

Do you get terrible smell or smoke ?

@dan-xe2xt 8 ай бұрын

Just wondering anyone who has done this, where did you route your hose? I took mine over the brake booster and down under the drivers side but the vapor smells are bad. Doesn’t bother me too much, I drive a semi daily but it does bother my family. Did anyone get the extended hose and where did you route it? Down the frame farther?

@justplain8793 3 жыл бұрын

Funny how you believe that oil only escapes while at idle. Think about how much pressure is in the bottom end while at 30 psi of boost!

@jbandit2044 3 жыл бұрын

Exactly, he’s just not seeing anything while he’s moving obviously 🙄

@opmxopx Ай бұрын

Do I need to get it tuned if I do this kit?

@SRMSPLAYER64 3 жыл бұрын

I wish 6.7s were built like this. So much more room without all of the b.s. Awesome truck and love the channel

@someguy4476 2 жыл бұрын

If only they weren’t on back order. 6 week wait times for my order when I was told 3 weeks, and now I’m still going to have to wait another 3 weeks for my catch can kit. Really unimpressed with SPE and their lack of inventory.

@hibrad2005 3 жыл бұрын

I have had both of these since the ICC launched and indeed get no drips, but the smell and smoke are more than I can stand, Im adding in an external catch can w/ venturi tube into exhaust. I honestly get a little embarrassed with the smoke coming up from under the truck that I can see whenever I am sitting idle in traffic or at drive throughs.

@Acjeter5 Жыл бұрын

Did you do this? I have the same problem where the smoke caused people to comment so I extended the hose toward the rear of my truck. What would you suggest for prevention of the oil drip

@brysonsmith1752 Жыл бұрын

Do you have a link for this?

@camrenboudreaux482 3 жыл бұрын

Simple word for it is not oil soaked air but “blow by” and it’s normal except for in heavy amounts

@jasonswift7098 3 жыл бұрын

Catch cans are mounted internally anyway so why is this a big deal? they are never mounted outside the engine bay.

@curtisbull1583 2 жыл бұрын

Is this really needed though, in your last video on their CCV mod you didn't have any oil coming out, so if a guy doesn't have any oil coming out of the vent tube this part is really just a waste of money isn't it?

@gregnixon1296 3 жыл бұрын

What kind of hose is necessary for catch can back to intake? The 3/4" heater hose that I used collapses. Heat from the engine makes the hose pliable, and the intake's vacuum pressure causes it to collapse.

@akbychoice 3 жыл бұрын

Kits have a heavy wall silicone hose.

@0369tb Жыл бұрын

Yes but it also cause excessive blow back in the turbo which in turns pushes oil out the exhaust chamber of your turbo and into your exhaust. This make the truck smoke like a train.

@MarsellusWallace2024 2 жыл бұрын

Any reason you can’t do this with the existing CCV factory filter and plenum in place? To essentially give you much longer filter life? Seems that a combination of both would still prevent any/excessive oil from reaching the turbo. If this works as well as advertised then there’s no reason to delete the CCV plenum and filter.

@Doc.Holiday Жыл бұрын

The factory CCV Box would not fit on top of this because of the thickness of the flanges. Ford could redesign their box and incorporate a cheese grater like this. That would be a great way to modify future models.

@jeffdroller Жыл бұрын

Do you have much oil smell from the CCV Reroute? I have looked about both the reroute and internal catch can for my 22MY SD.

@samjones4772 Жыл бұрын

It smells like an old tractor. Personally I love it

@Inflikz 3 жыл бұрын

I love how all this is working for everyone but me 😂 my powerstroke still smokes when coming to an idle out the reroute kit and with this internal catch can in it and still drips oil? But mines a 16

@jbandit2044 3 жыл бұрын

Maybe you have more blow by than this can handle 😅

@Inflikz 3 жыл бұрын

@@jbandit2044 i mean ive compared it to other powerstrokes like mine and pulling the oil cap off next to theres with theres off the blow by is the EXACT same coming from the oil cap and is normal, somedays it doesnt even smoke out the ccv but when it does its def noticeable. Ive even asked mechanics and they even said its weird lol.

@Dieselnm101 3 жыл бұрын

I’ve experienced the same issue with the internal catch can. I’ve installed on my truck since the launch week and this winter i’ve seen droplets during warm ups. It’s minimal but you buy a product for certain reasons and i didn’t want oil on my drive way where my son plays. I will be adding a external catch can and longer hose to the rear of the truck. I hate the fumes, especially at drive through. I’ve also compares my 2012 85k miles to my buddys 2019 1k miles for blow by and it’s literally the same.

@akbychoice 3 жыл бұрын

Seems like a simple fix would be an oil fill cap with a hose on it.

@dcheynerl 2 жыл бұрын

I had to trim mine down, it didn't slip right in like yours did no matter how I orientated it

@beaugodwin7306 6 ай бұрын

How did u trim yours down? Take some off the sides and bottom or just sides? I've got a 2012 and just put mine on today an tried to install internal catch can and it seemed to wide so I need to trim mine to

@dcheynerl 6 ай бұрын

@@beaugodwin7306 I have a belt sander and just started removing material until it slipped in without any force

@wilburdunn2552 3 жыл бұрын

So when you go get the yearly state inspection, they don't look at this?

@Smokes-1000 Жыл бұрын

Depending on what state you live in in my state for diesels they only get safety inspected there is no diesel emissions testing but some other states are different.

@ryanvernon9473 3 жыл бұрын

Is that for every 6.7 or just the 2017+?

@tylermccarthy1891 3 жыл бұрын

Every 6.7. I just put one in my 2011 about 3 months ago. Super easy install.

@cadusetembre6894 3 жыл бұрын

Yo man, my 19 350 has some kind of oil leak on top of the front 4x4 driveshaft. Once in a while it drips a bit of oil on the ground. Would you know what is going on?

@WaterandWoodsmen 3 жыл бұрын

Upper oil pan is a common leak

@fame0095 3 жыл бұрын

Yup, this will fix it. I just did mine

@Brandon-vo1wr Жыл бұрын

Catch can will not fit flush to the crank case port 🤬 do you have to modify it??? It’s like it’s long. HELP!!!

@NicManGun 3 жыл бұрын

Why does there need to be a hose? Couldn’t you just put crankcase air filter in place of the hose and be good? What’s the purpose of putting a drip hose?

@curtisbull1583 2 жыл бұрын

Good question, most all older engines just had a filter that was placed right in to the valve cover. Seen several high hp gas engines with them and never seemed to be an issues.

@miguelcondejr5135 3 жыл бұрын

Do you need custom tuning for this?

@Jay-sz5dt 3 жыл бұрын

I did ccv re route to under the cab and when idling a lot of white smoke/foggy thing coming out. Is there anyway to fix?

@luisvaldez5950 3 жыл бұрын

That’s normal boss man

@TopCorey 3 жыл бұрын

You can route that hose to the back of the truck or into the exhaust. I left mine there and every drive through window they think somethings broke on my truck 😂😂

@ashleyratliff9657 3 жыл бұрын

Hey man. You and SPE Dan need to figure out how to mount a manual trans to the 6.7!!! Then sell the kit.

@jackm4996 3 жыл бұрын

I second that! 🇺🇸

@ivansolis2465 2 жыл бұрын

Am IVAN SOLIS AND I APPROVE THIS MESSAGE 😅 that will be a dream come true 😬

@ivansolis2465 2 жыл бұрын

If they make it I will put it to my f350 for sure

@c.mcdonald5338 3 жыл бұрын

I installed both at the same time, and have ran them for the last 11k miles.... no drips.

@kcutler3142 3 жыл бұрын

Do you get a noticeable amount of vapor?

@Whatisgoingon-od9yb 3 жыл бұрын

How’s the smell

@brian3.2 3 жыл бұрын

I see a lot of vapor and I can definitely smell a burning oil smell.

@jeisonpicado2433 3 жыл бұрын

Do they make one for 6.7 cummins engines.

@bryceweaver8211 3 жыл бұрын

Cummins have a ccv filter. There are lots of videos on how to change it. Not very hard at all. I think that you are supposed to change them at 30k miles?

@AFPECE 3 жыл бұрын

@@bryceweaver8211 Of course 6.7 Cummins have a CCV filter, SO DO 6.7 Powerstrokes.....this is used for when you DELETE the filter and vent to atmosphere. The answer to the question is no, SPE does not make of these for any year Cummins. Just get an external catch can, deal with the drips, or don't delete the CCV filter at all

@sunsetblvdbagger6433 3 жыл бұрын

I already got a cheese grader at home

@hgffrank 3 жыл бұрын

It seems that installing an actual catch can would be the common sense thing to do, but I digress

@wkailing22 3 жыл бұрын

What is the ladder thing used to get up top of the engine?

@Nickysix6 3 жыл бұрын

Topside creeper, it's a must have working on these trucks

@austinwalker6448 3 жыл бұрын

So what if you take your oil cap off and little bit of smoke comes out?

@FlatPlaneCranky 3 жыл бұрын

Normal.

@droz2377 Жыл бұрын

why wouldn't you just add the internal catch can and rig it with the CCV hose and have zero oil blow into the filter and have no emission issues? That way there is no tampering with emissions issue you are just adding extra filters. sure there is vapor but it better than the EPA or local fining the shit out of you.

@jangslive2073 3 жыл бұрын

Second

@jimmy10142 2 жыл бұрын

I'll stick with my external can, toss it out and slap in a new one. I can only imagine what will happen once the internal type clogs, if you can catch it in time, pull it out, clean it, reassemble.......yeah, no thanks, good marketing but bad idea.

@gregnixon1296 3 жыл бұрын

Car makers at screwing up their engines by not creating remedies for the problems created by emissions requirements.