thank you very much for this video, probably saved me lots of money. You can find the replacement part on amazon, shipped the next day, takes 15 min to replace. The hardest part is to remove the 2 screws

HUGE thumbs up! Remove the bolts first and THEN disconnect the wire. Lots of videos on this fix, but this was the only one that worked for me. Thanks!!

Checking in to say Thank You for this instructive video! I was thinking I'd be looking a a huge repair bill but hubby was able to fix my Escape in under 1/2 hour. :-)

Thank you, thank you, thank you. I followed your video and was able to make the repair itself. My wife is blown away.

Thank you so much! I can’t wait to fix mine this weekend. 😊

Thanks for the info - just fixed mine - I was getting ready to replace the actual air condition heating control in the car I stumbled across this video I appreciate your time making this video

Oh wow. Something that's bothered me for a very long time can be resolved so easily! Thank you!

Thank you. You're a life saver, my 08 escape has same issues, and fan speeds have slowly gone bad. Now I know what to do.

Thank you so much saved me a lot of money and time.

Thank you so much! I followed your instructions and now my blowers work! 👍🏻 you rock!

My 2009 Escape now has a working blower motor again. $17 and 25 minutes of freezing my butt off but well worth. Thank you so much for posting this!!

Thank you, great clear instructions and took me about an hour to do. Hardest part was getting at the screws because of the location of them.

good video. Thanks for this info. With your reference I was able to repair my vehicle problem. Keep more videos coming.

Thank you very much! This let me fix a problem my mother has had for years for $24. We bought from the more expensive store because they have a lifetime warranty on these and said people usually have to do it every 2-4 years with the Ford Escapes. I quickly fixed her 2008 Escape myself. Thank you.

Was able to swap out the part in under 10 minutes from start to finish. Thank you

Thank you for this easy to follow video. Probably saved me at least $100 to do it myself.

thanks for the video, taking the screws out first was a good tip, but I didnt have the right tools for it, had to unplug it first. Took me forever to unscrew and put back in.

Thank you sir! God bless you!

Worked like a charm

Worked beautifully for me. Thank you very much for your contribution.

Thanks! This is the exact problem I'm having! Gonna give this a try!

Thankyou very much! This has been a great help and problem solver!

Thanks, far better than another video where thhe guy said just pull the wire harness off first without saying there is a locking clip.

Thanks a lot! Saved me time. Was going to take out the console first and test switch. I like how my Escape seems to have same issues like other peoples Escape 🤔

Thank you!!!! Just fixed it and works as expected!

Thank you,it works the same way on my Mazda Tribute 2009.

Thank you guy!! 😊👍

Thanks for this video. It was a bit awkward reaching the screws but I saved a trip to the mechanic and the ensuing repair bill.

Amazon. It worked great. Had to drill new holes, but easy adjustment.

Thanks a bunch. I went looking for a solution that I thought would involve taking the radio out. Turns out to be less than five minutes from start to finish.

Thanks for this tutorial. I was able to make the repair for a cost of only $22. I have to admit that it was difficult removing and replacing the screws.

Thank you, I got the same problem. I'm going to try it. Very helpful video 👍

Thank you SO MUCH for this.

Thank you sir !! Great video!

Worked perfect, thanks for the video. What a pain in the butt to remove those screws though.

Thanks it was super for me thanks again GOOD bless you

Thank you! Very helpful!

Thanks sooooo muuuuuuccchhhhh… your video helps me..!!!!!!!! Thanks…. Bendiciones..!!!!👍🏻👏🏻🙏

This is what is wrong with the company vehicle. I've had this problem before on other vehicles but your video shows where to look. Going to ask the boss to buy the part and let me fix it, should win a bunch of brownie points! Cheers mate!

exelent thanks very good explanation

Thanks man! I'm about to try this fix since my car has the same symptoms

youtube does it again, thanks. solved problem.

Excellent vid thanks.

Thank you. God bless

I have the same problem on my escape. But only fan speed #4 works. I’m gunna inspect mine. Hopefully that’s the problem. Thanks for posting this!

Your the best!

Thank you so much!!!!!!

Thank you 🙏

Awesome thanks

Thank you

Great video! After watching it, I ordered the part ($17) and once I got it, it took about 30 to replace it, only because the location of the screws, but I was able to do it and the ac is back to normal, working beautifully at all speeds. How much would it have cost if I took the car to a shop??? Very helpful video - thank you so much!

My Ford fiesta has the same problem as your video suggests. I know yours is an Escape but do you think the resistor pack is the problem? Thanks

Hi! I followed your instructions, but the new relay just works on the very highest level. What should I try next? Thank you so much for your video.

Has worked in the past but not this time. 09 Mariner which is basically the ford escape. Doesn't work at any speed 1 thru 4. New resistor no luck. Looked for fuses. Any thoughts?

Does anyone how to fix Lights on lower setting not working on light on 08 mercury mariner?

I have opposite problem on 2014 Escape. The blower motor cuts out at highway speeds, cool air still barely comes out the dash, but no air blowing. Works fine in city driving. Any suggestion? No check engine light is on.

Could a bad resistor blow a fuse for my radio? The radio stopped working at the same time my lower settings stopped working on my blower? Thanks!

Do these instructions transfer over to the Ford Fiesta by chance??

I thought maybe it was my cabin air filter that was stopped up. Maybe this is what it is, I’ll have to check it when I get a chance too

Does this work on the 2014 Escape. My AC will be blowing one minute then it stops. The sound it makes when it stops is like when you turn the defroster on. You can still feel the cold at the vents but it stops blowing. Sometimes if I turn the AC completely off for a few minutes and turn it back on it works again for a short time

Does this fix work for a 2007 ford escape as well?

Anyone have any thoughts for this - my Fan Blower (2008 Ford Escape) intermittently fails and fails on ALL speeds fail (not just the lower or higher settings). I replaced the resistor pack and it seemed to be resolved for a day or two then back to working intermittently. A few weeks after I replaced the resistor pack my wife noticed the Fuel Gauge only showed 3/4 full after a fill-up. The Fan wasn't working at that time. A day later the fan was working and the fuel gauge showed a full tank. That particular combo of events has only happened once. I wondered if both items are on the same circuit/relay (can’t be a fuse or they’d just fail 100%) may be they’re on the same relay?? I checked the Owner’s Manual and I’m not finding a common link.

I have a 2017 Ford Escape S/2.5L....I have to replace the fan speed resistor (blower motor resistor). Videos on u-tube show how to do it up to year 2012. Can anyone tell me where it is located on a 2017

I have a 2008 ford escape and i have the same problem so i change that part and it was working for couple of weeks and the problem came back...can you give me some advice please

On my 2007 Ford Escape the blower Motor is running real low does not work on the switch High or low

Took the resistor off and found no bubbling on the part. I turned the car on and the blower still worked???..only on high like before. Does that mean the resistor is not bad? Maybe it is in the dash..behind the knob?

It's the same for a focus 2008?

I just replaced mine and it worked at first few trys. next morning it went out again. only works on speed 4 again. any suggestions?

I do have the same problem and i replaced the resistor and still have the same problem

Mine is 2014 but makes noise on all speeds but no air flow coming out, would this fix that problem?

Is it the same for 2015 escape

Why did you skip the screw removal?

These Resistors used to be 40 bucks CDN ...Now closer to 65 sadly..these are a pain in the arse to change...don't be fooled😝🤣🤣🤣

None of the fan speeds work in my escape, maybe all the speed conductors have gone bad?

My blower motor on my 2008 works, but randomly will not, then driving along it springs to life... sounds like could be same issue as this video.

I have 2002 Escape, anyone checked or tried if it’s similar to the video

I replaced the same part in my 2008 escape today july 19 2020. But when I turn the dial. It's all 1 speed. All high speed not sure why. All I know is I never should have bought this junk suv. I feel like this is the first of many problems ahead. ( F O R D ) Fix Or Repair Daily

Great video.....but I would like you to say "UH' a few more times. I'm just short of counting 200