Foxbody Mustang Trim Painting on Project "Tax Return"

Foxbody Mustang Trim Painting on Project "Tax Return" - TIPS04E19

Рет қаралды 15,558

3 жыл бұрын

Looking to freshen up the look of the trim on your Foxbody Mustang or Classic car? Check out this video as I run you through how I prep and paint my trim on this 1988 Ford Mustang Coupe. It's very important you use the right products for the right applications in order to get a nice looking and long lasting result.
Prep your surface with 400 grit sandpaper and finish off with a purple scotch pad! Recommend: 3M Scotch-Brite Hand Pad 7447 PRO
Below is the PAINT product I used in the video which does NOT require primer!
TRANSTAR 2 in 1: www.amazon.ca/Transtar-4653-S...
If you want some other great products to consider check out the below. Note you will have to prime your surfaces first especially if you have bare metal present.
MARHYDE: www.3m.com/3M/en_US/company-u...
SEM: www.semproducts.com/product/t...
///SUBSCRIBE
To My Channel! - Your Support Motivates!
///VISIT MY WEBSITES
theinfamousproject.com
dechmotorsport.com
///FOLLOW ON SOCIAL
/ theinfamousproject
/ theinfamousproject
/ infamousproject
/ theinfamousproject
///GEAR & EDITING
Camera: GoPro Hero7 Black
Accessories: GoPro Accessories Only (I'm brand loyal)
Mic: Rode Micro
#foxbody #trimpaint
Editing: Myself via Adobe Premier Pro
Music: elements.envato.com/audio
///TAGS

Пікірлер: 51

@jasonfields302 2 жыл бұрын

Thanks!

@TheInfamousProject 2 жыл бұрын

You're welcome man I really appreciate your support as always!

@rockytorrez4553 3 жыл бұрын

The person that buys that stang will be very lucky person. I hope one day I can buy my stang shout out to Mr infamous keep up the videos

@carlosnsosa99 3 жыл бұрын

You do great work and have unreal attention to detail

@Deron0515 2 жыл бұрын

Really appreciate your videos and the time you put into them. The education learned from step by step process an materials used is priceless! Thank you and cheers

@TheInfamousProject 2 жыл бұрын

You're very welcome!

@mysticker11 3 жыл бұрын

when i first bought my latest foxbody i got two door dings at walfart the first week parking where i though i was ok...but now i never drive my fox to a dangerous parking spot..5 years later (now) i drive my daughters pontiac g6 to her doctor apponintments and wait in car for her.i had 3 peaple park by me and bust their door out on her car while i was in it.wow if it was my fox and not an old pontiac id been pissed off...lol ....

@jmart2432 3 жыл бұрын

As always, your attention to detail and patience show excellent results. Thanks for sharing your knowledge. That’s a wicked looking car!

@roadsideguy5902 2 жыл бұрын

Thanks for taking the time to teach me. Much appreciated.

@GearHead704 3 жыл бұрын

Once Tiffany finishes sanding I think I'll have her do this to all the trim, I'm sure she won't mind the extra work 🤣

@TheInfamousProject 3 жыл бұрын

LOL! You've got a keeper my friend

@Death656 Жыл бұрын

Another great video I’ll be tackling all my Moldings this weekend, thanks TIP

@Adrenacyde 3 жыл бұрын

Doin' a GREAT job on the Content man. Definitely your unique flavour. Keep 'em comin'.

@TheInfamousProject 3 жыл бұрын

Thank you sir

@red_fox_flareside Жыл бұрын

I agree. It looks funky having the front and rear moldings on and not the doors.

@droogii1142 3 жыл бұрын

Nice trim makes such a difference. Good tip with the razor blade to clean the glass up.

@simcoecountygearheads 3 жыл бұрын

I’m with you on the door mouldings I can’t stand when guys leave them off.

@markweber7275 3 жыл бұрын

A helpful tip use 00 steel wool and finish with 0000 steel wool to eliminate glass contaminated with road film/ overspray. Try on a old piece of glass finish up with auto glass cleaner. Hope you like the result, looks like new glass when finished.

@TheInfamousProject 3 жыл бұрын

I've actually used this on the inside of rear glass to get off old Tint Film Glue and not damage the rear defrost lines! Good tip.

@blackgtfoxovert6104 3 жыл бұрын

Good knowledge thank you!

@simcoecountygearheads 3 жыл бұрын

I’m saving this for my Sunday morning coffee 😂

@TheInfamousProject 3 жыл бұрын

Hahaha!

@mikepoppjr 3 жыл бұрын

I like the molding on the sides nice antenna...😆

@TheInfamousProject 3 жыл бұрын

Ya that thing is getting taken off!

@89gt5.0 3 жыл бұрын

Your attention to detail is key to a nice fox.. need some 17 inch wheels now 👍

@1991CALYPSO 3 жыл бұрын

That car has 17" Pony's...

@89gt5.0 3 жыл бұрын

Meaning not the pony’s. After market.all stock mustang wheels are horrible looking

@brucebell7623 Жыл бұрын

Joined your channel, enjoy the content. Will be doing trim on my 88 coupe. Could you list material mentioned, and best place to source products in one zhot if possible? Thank you.

@josephshenette812 Жыл бұрын

What is that rim, tire size combo? Looks good.

@dennis17116 Жыл бұрын

Which trim paint has the deepest black and shiniest satin?

@sean6049 Жыл бұрын

Thank you! Only video on KZfaq showing install of rear window trim on fox coupe. So i install the rear bottom piece, you connect the top peice to the side peices and install them all together?

@TheInfamousProject Жыл бұрын

You can start with the top piece and go the other way as well just make absolute sure it's centered

@sean6049 Жыл бұрын

@@TheInfamousProject Thanks! I'm gonna give it a shot soon. Just waiting on 2 clips I'm missing along the top.

@shawnwhite3209 3 жыл бұрын

Great job as always ! I have a question for you . Do you know what color the interior windshield trim is on a 90 vert? Looks too be a grey ish but I'm being told it's black which I feel is incorrect. It definitely isn't the same as the black satin exterior windsheild trim. Thanks for any help

@TheInfamousProject 3 жыл бұрын

I know what you're talking about but I do not know the official color

@shawnwhite3209 3 жыл бұрын

No worries , thanks for getting back too me. If you happen too come across the name of the color let me know.

@chrisdodson7950 2 жыл бұрын

Have you every polished a windshield that was scratched ? I've heard it can be done on an old windshield with nice results instead of replacement .

@TheInfamousProject 2 жыл бұрын

Yes you can however there is a limit to the depth of scratches and pits the polishing can get out

@dalemayhew7523 2 жыл бұрын

Where do you find your trim repair products

@dennis17116 2 жыл бұрын

Which trim paint to you prefer? Looking for the smoothest satin finish. Thanks.

@TheInfamousProject 2 жыл бұрын

The SEM or Marhyde are the best for sure

@sammymendezjr1864 3 жыл бұрын

Maybe you can answer my question just install aftermarket roof molding but we're the quarter window meet its not flat it stick up a little and bothers me .

@TheInfamousProject 3 жыл бұрын

Email me a pic or DM on Instagram and I will try to help