Thanks Warren. Much apreciated. I actually found out why they use a three point switch. @mtoilguy informed me that they use the same switch on the controller that can be wired as well as wireless. The middle spot turns on the wire. I also experienced some issues with the channels doubling up but found the solution. I will post in the Discord. :)

Thanks Buddy. Was happy to do it and Thank you for selling them to me :)

Thanks Dan, much apreciated

Thanks for watching Nico :)

Thanks for watching Marty. Your recommendation was definitely a deciding factor when I made the switch.

Thanks Mass! It took me two nights to get all the info and put it into practice. I hope you can get more enjoyment out of it.

@@IrrerasCarrera thanks again for taking the time to do it brother

Thanks Ron. Carrera Controllers are good for what they are and you should have years of great use without needing to upgrade.

I'm glad you liked it. I had the opportunity to test True speed and Fslot together and to be honest, I liked the True speed better by a little bit. However, when I got home and messed with the settings, the Fslot ( for me) is a WAY better controller. Thanks for sharing!!

@@IrrerasCarrera After watching your video I decided to mess with the settings. I been using both of them for a couple of months just the way they arrived. It's funny, one of them works just like your video but the other one doesn't. I hold the throttle wide open, press the lane change button and turn the control on and the light comes on. When a release the throttle and then the lane changer button the light goes off. tried numerous times with the same results.....UGH...What I'm I doing wrong??

@@fixit5355 after holding down the throttle and switch button, turn on the controller. You should see a solid red light. Then release, it should blink 1,3 or 4 times indicating that you are in the first menu. Check to see if the model #s in the back are the same. Some versions vary slightly. Next check that the trigger piece is properly installed. One of my controllers had a trigger that was not set all the way. It protruded a bit, not allowing for maximum throttle. This is off the top of my head but send me a video through discord, link in my bio, or an e-mail. There has to be a programmed menu or the thing wouldn't work. Sorry you're having trouble.

Yeah man! Thanks so much. The main reason I picked these up was to be able to use more than 16 steps of sensitivity. It was the selling point for me. Plus the added tunability in a wireless controller was just a bonus. You won't be disappointed. I'm still not giving these controllers to guests though, they get the old stuff lol. The Carrera plungers are not garbage by any means. They are great for what they are. I'm glad you enjoyed the video. Thanks again 😎

@@IrrerasCarrera Most definitely, Joe!! If I pick some up I'll let you know how I get on with them. I agree about the guests though... You probably have a bunch more than me to worry about lol.

Thanks, glad you enjoyed it!

Ok, it seems like there's not enough power getting to the transmitter. There could also be some interference coming from other devices like cameras or certain LED lights. Neon lights as well or possibly another wireless device that might be sharing the same channel off the 2.4ghz of the controller. You should probably contact Frankenslot directly or your dealer that sold you the controllers. If you need help to trouble shoot more, please feel free to email me or join the Discord ( link in my bio ) Thanks for commenting.

@IrrerasCarrera Thank you for reply buddy! Yeah I will try with different batteries. I have a lot of wifi devices in my house, it would be really hard to try to isolate the issue, like all lights are smart etc... but the Carrera wireless controllers work fine, great range and no interference. I will do more testing and share later. Thanks

@@EASYUSA another overlooked issue can be that the FS are sharing a channel on the receiver. Make sure that all controllers are on separate channels, including the carrera controllers. If you pair a controller to a channel that already is assigned then you can get overlapping issues. Worth a try to just start fresh and re-pair all your wireless controllers. Unplug batteries of controllers that are not in use as well.

@@IrrerasCarrera Man!!! And that was the problem!!!!!!!! Thank you so much!!!!! I love your videos! And I really like your track layout super cool.

No problem, I'm glad you got it sorted. Thank you for the kind words. :)

Unfortunately not on the controller itself. However, setting the brake force on the CU or through Smart race is pretty easy.

Looks can be deceiving 😏

@@IrrerasCarrera I’m not insinuating it’s bad I have one and I think they are a hell of a lot better then Carrera standard thumb controller

@@GPS52 All good Brother. Any 3rd party controller is miles ahead in performance and feel. I have yet to try the Ram jet but I've only heard good things.