Garage Painter Guy Solves The Solvent Pop Problem! Here's How!
Рет қаралды 1,674
5 ай бұрынOkay friends, in this video I reveal the solution to eliminating solvent pop!
@markdrewett149 Ай бұрын
Nice job. Try lifting those fans off the floor. Put them on a chair as they probably stirred the dust and your floors not wet.
@BLACKRAIN390 24 күн бұрын
I don't wet the floor anymore, when the clear is drying and the floor water is evaporating it can make your clear die back ( dull the shine)
@markdrewett149 24 күн бұрын
@@BLACKRAIN390 im no expert and have wondered if the humidity could be a problem, so what said makes sense. I mentioned the fans because i did a job with fans on the ground and no water and man i got tons of shit in the paint.
@BLACKRAIN390 23 күн бұрын
@@markdrewett149 I use 36 in paper around the car at times
@evyc2537 5 ай бұрын
The paint job looks great on the Datsun 🤩
@SenorPapi-rs6xf 29 күн бұрын
I been trying to figure it out it and it’s definitely that. Thanks bro 👍 (Da clear cuh)
@BLACKRAIN390 24 күн бұрын
Use a slower reducer and wait double the flash time on the base coat , I feel medium reducer cause it.... same with the clear
@otiliomorales9422 5 ай бұрын
NICE JOB AND BETTER DESCRIPTION
@evyc2537 5 ай бұрын
Haha! I liked the intro😂
@B15SDMDESIGNS 5 ай бұрын
Is the solvent issue related to the hardener or the thinner used in the 2k clear?
@fox-body 5 ай бұрын
The hardner. The medium dried to fast. I had to switch to the slow.
@georgespangler1517 3 ай бұрын
I had one solvent pop problem in 30 paint jobs and it's always in the base coat not being dry enough to release all the vapor, and it was the coolest I ever sprayed , never spray below 70 degrees but if you do wait atleast 2 hours before clear coat.
@turbovolvos40 5 ай бұрын
I was trying to find the video you made on your engine and pinion angle. Could you help me?
@fox-body 5 ай бұрын
Are you referring to the foxbody?
@turbovolvos40 5 ай бұрын
@@fox-body yes
@fox-body 5 ай бұрын
Setting The Pinion Angle For Drag Racing, 2JZ Foxbody.. kzfaq.info/get/bejne/hK56pbKiqbu-lWw.html
@turbovolvos40 5 ай бұрын
@@fox-body thanks
@georgespangler1517 3 ай бұрын
Get away from 720 and use 740
@georgespangler1517 3 ай бұрын
You just reliein on luck only waiting 15 between base and clear,
Jason Derulo
Рет қаралды 105 МЛН
Linear blocking Tools
Рет қаралды 17 М.
Pete's Hobbies
Рет қаралды 6 М.
Repair Geek
Рет қаралды 2,4 МЛН
Mac 720S
Рет қаралды 1,8 МЛН
SarafannoeTV
Рет қаралды 8 МЛН
Hammabop ustalar.
Рет қаралды 1,5 МЛН