Hi sir,, how are you??

San i do??? Pleace send me the sistem,, zahidmd605@gmail

what percentage of purity is the sulfuric acid you use? THANKS

I am intrested to start recycle and recovering precious metal bussiness

@@Prince-nt4dcThe sulfuric needs to be 70% +. Battery acid will work but it takes longer because it needs to evaporate off the extra water while heating. When enough water evaporates it will begin to digest the plastic. It is very very dangerous because sulfuric acid loves water. It will suck the water out of your skin in seconds. While doing so a thermal reaction takes place and it can reach 3 to 400 degrees F. Thus removing (burning) your skin much faster than you can react. Get enough on you and it can go to the bone. If you do it , do NOT use glass (crack) and acid everywhere. Stainless steel only

Ok

Remember he is not in America. So the cost of things is a little different.

Thanks

Hi I can have u phone number My self Satish from Bangalore My number 9164229918

yeah i see a video in a poor country they make this with 150 kg scrap and they get 355g of gold after with aproximativ 200l of chimical so it's worth

@@jokerda8857 sir all ok, but excatly where is buying ic chip scrap

@@brighttec6069 You can buy it from Ebay

Depending upon quantity, average 1hr minimum

Javier Valenzuela yes

Bardağa koyduğu H2SO4 yani sülfürik asit. Anladığım kadarıylada yüksek konsantre 98% bir sülfürik asit. Okulda, kimyasalların formüllerine isim takarlardı, akılda daha iyi kalsın diye. Mesela bu asidin lakabı hasan2salakosman4 yani Hasanın H 2 Salak S Osman O 4 VESSELAM......

He is explaning how to get gold with minimum spending. So he spends just sulfuric acid, if we go to use more substances i think it worth just if we do in big amount of scraps. This is also good, we buy just sulfuric acid and of course we spend our free time to collect gold from chips after desolving thats it :)

@@mirishow the problem is if all the gold is not recovered it is a inefficient process. It is to hard enough to collect and process to not be efficient and recover all the values.

@@mirishow If you want to do it even cheaper, use incineration to burn off the plastic, that will eliminate the need for sulfuric acid. The fact is if you are okay to work with strong acids as he is showing, then the only thing needed to add for extracting the gold chemically instead of mechanically with tweezers is 1% more nitric acid, some table salt, cotton or filter paper to filter the liquid and a piece of iron scrap. Table salt + nitric acid makes aqua regia and dissolves the gold. Filter off the dies and other garbage. Use iron + the sulfuric acid from the beginning on iron scrap to make kopperas, filter. Copperas + gold chloride precipitates the clean gold. Melt. Easy and cheap process. I wouldn't be surprised if his losses were around 5% doing it mechanical instead of chemically. I see this video not as a recommendation of how to do it but a proof that it can be done this way too.

98%

@@liliputjack8308 96 too

Looks impressive but contains just a tiny amount of gold. About 1/20'th of the gold in the top part..

No. But you could use incineration instead.

Yes dude,its pure gold

You can find it in car batteries

24 karate kung fu are 😆😅🤣

What is ar

Upto dissolve graphic part (black coating)

1 hr minimumin mediumflame (depending upon quantity of ic)