Goodwin Performance Ski-Doo 850 ETEC PDRIVE Clutch Disassembly

Рет қаралды 112,276

Matt Roebuck

8 жыл бұрын

Goodwin Performance how to disassemble new Ski-Doo PDrive clutch.

Пікірлер: 14

@onefiftyfour8505 2 жыл бұрын

Is there a spring guide in the bottom of the moveable sheave? Or do the spring just sit inside the bottom of the sheave?

@sixdaiz 5 жыл бұрын

How do I use that grease tool for the rollers

@rogernegley8016 4 ай бұрын

The dampener bolts are tighter than that

@barefootbob1269 3 ай бұрын

Um no they are not! He is absolutely correct! From the manual 23+ or - 3ft lbs I will help you that is between 20 and 26 ft lbs.

@kevinhanlon6817 4 жыл бұрын

where can I get a pair of the pliers like your using on the circlip? Also, do you have a follow-up demonstration of the opening tool?

@mattroebuck4903 4 жыл бұрын

goodwinperformance.com/product/pdrive-circlip-pliers

@justanopinion-ub9pp 3 жыл бұрын

@@mattroebuck4903 I recently did a weight change on my P Drive for the 900 turbo and dampener cover did not come apart quite as easy .. it looked to be as if it was pressed fit in the shaft. So I just did weights and couldn’t do the spring upgrade any thoughts on how to remove the dampener cover?

@Kwobler 6 жыл бұрын

where can you find these new tools..Im doing clutch work in a few weeks and would like to get these tools

@mattroebuck4903 5 жыл бұрын

goodwinperformance.com/product-category/ski-doo-clutching/pdrive-850-etec/pdrive-clutch-tools

@ktajax 7 ай бұрын

@1:21 my dampner says FU!

@jessef3067 3 жыл бұрын

Didn't show the bushings but ok

@jakepeterson3379 2 жыл бұрын

I have gotten to the part where you smack it with a hammer and it will not come loose. I mean I have literally beat the shit out of the thing with a rather large hammer and nothing..

@onefiftyfour8505 2 жыл бұрын

Go outside and put your damper governor cup bolts back in, bolt your puller back in and bang the on a concrete or hard rock, took me 5-6 hard blows on a big solid rock, you will hear the halves split apart and be able to remove the damper after you unscrew bolts back out.

@jakepeterson3379 2 жыл бұрын

@@onefiftyfour8505 I finally got it later that day after doing something similar to what you said. Thanks for the reply though maybe it'll help somebody in my predicament lol