Wanted to send a thank you! The bearing that you show at <a href="#" class="seekto" data-time="486">8:06</a> was the exact problem that I had and all it took was a little WD-40 and machine oil and its working again.
@green-crocs-fixes15205 ай бұрын
Thanks Craig, happy to help and glad you managed to resolve 😎.
@simonwatmore2573 ай бұрын
Brilliant Tutorial Will Help So Many, Excellent Thanks.
@green-crocs-fixes15203 ай бұрын
Thanks Simon, happy to help😎.
@harjitsamra13137 ай бұрын
Thanks. Your suggestion to oil the small belt cog worked.
@green-crocs-fixes15207 ай бұрын
Thanks Harjit, happy to help 😎
@elloragray69457 ай бұрын
Thank you so much! I have been searching the internet high and low for this
@green-crocs-fixes15207 ай бұрын
Thanks Ellora, happy to help 😎.
@AndreYeu Жыл бұрын
This video did it! It got to the part at <a href="#" class="seekto" data-time="474">7:54</a> where that was the part that was stuck on mine. Some lubricant and it started moving again. Thanks for saving me some money and plastics in the landfill!!!
@green-crocs-fixes1520 Жыл бұрын
Thanks Andre, Appreciated.
@patriciamclaren843 Жыл бұрын
Thank you so much - my head was slightly different but did the trick - feeling very happy - Thank you
@green-crocs-fixes1520 Жыл бұрын
Thanks Patricia, happy to help 😀.
@sonyyoung10367 ай бұрын
FYI. It is not necessary to remove all the parts after <a href="#" class="seekto" data-time="90">1:30</a> if you want to simply remove the hair from the turbine shaft You can remove the fastener holding the shaft in place as shown at <a href="#" class="seekto" data-time="250">4:10</a> and pull it out as shown. Thanks
@green-crocs-fixes15207 ай бұрын
Thanks Sony, but the title does say "Dyson Turbine Head Not Working Fixed" as it quite clearly was not working. Naturally one would not repair the unit then place the Brush head full of hair back inside. Other viewers have benefited from the video hence the views and comments, and you also can use the KZfaq platform to illustrate whatever you would like to present. Kindest regards.
@green-crocs-fixes1520 Жыл бұрын
Thanks Andre, Happy to help, and glad you have manage to resolve 😀.
@snowman4981 Жыл бұрын
Great Vid, thanks. Any chance you have the specs on the very tiny spring that popped out and disappeared (@ <a href="#" class="seekto" data-time="200">3:20</a>-<a href="#" class="seekto" data-time="225">3:45</a>)? Lost mine and if I had length and diameter and coil count I could find a replacement.
@green-crocs-fixes1520 Жыл бұрын
Hi Snowman, yes that tiny Spring can be elusive if it pops out into infinity. Sorry I have no idea of the size though it was very rigid. Maybe you can purchase an assortment box from eBay. Regards 😎.
@snowman4981 Жыл бұрын
@@green-crocs-fixes1520 Thanks for your response. Hopefully someone else tackling a repair can measure diameter and length and count coils of the spring and post the information.
@gabrielanunez40939 ай бұрын
Hello, a question how can I buy that part (the small part) I don't know how to look for it, thank you 😊
@green-crocs-fixes15209 ай бұрын
Hi Gabriela, I have also not been able to locate the part hence why I repaired it. There are various Schematics diagrams but no Brushbar Motor part available.
@gabrielanunez40939 ай бұрын
@@green-crocs-fixes1520 thank you for your help and answering I really appreciate it. You have a great day .
@grantmcwilliam3 ай бұрын
At <a href="#" class="seekto" data-time="454">7:34</a>, the teeth on the small cog of mine have all worn off...
@green-crocs-fixes15203 ай бұрын
Hi Grant, probably cheaper to replace the Head as i cannot see individual parts for these anywhere.
@grantmcwilliam3 ай бұрын
Yes, frustrating... Ordered a new alternative head...
@green-crocs-fixes15203 ай бұрын
@@grantmcwilliam good Idea as if newer then it may be more sufficient 😀.