Been looking at videos to try and figure out how to do this. Never understood what to do until I just watched yours! Very well done! Thank you!

Man, this is the first video that I’ve seen I’ve watched hundreds of them by now you simplified it on how to hook up the two yellow wires now my battery charges and I can get 12 V to the lights thank you sir. 🍻

You videos are different from other people normally it’s some 10 year old freaking out screaming and whining but you give out good information

Great video very helpful I ordered a ssr it’s on it’s way right now I know I’ll need a light for it this is a very affordable way to have a light thanks for your help! :)

Damn good video sir!! You just saved me a good amount of coin not having to buy the Blitzpro so thank you very much.

Always wanted to do this now I know that's for the video and clear instructions 👌🏻

Thanks so much for this vid! I'm trying to put a light on my CRF125

Going through the comments there’s been a lot of people (mostly seems to be the 140cc motors from what I’m reading) that are having dimming issues with this set up. To get around this, I used the same wiring from the rectifier to wire in a 12v rc car battery, then simply run your power from the battery to your switch and lights. Definitely has been an awesome upgrade to have a headlight on my pit bike. Thank you for the simplification in this video. A lot of the reading I did online was vague and confusing until I saw you do it

Cheers mate, your directions were spot on, mines flashy at low revs. wont be idling much though chur

Volumes is my fav band! definitely gonna try this on my bike tho

Hell yeah mine looks awesome! Thanks!

Edge if the earth :) still one of my favorites

i slapped a 18 inch light bar on my klx 140L for over a year now and its been working out great for me , i previously bought a light bar kit on ebay for dirtbikes but the LED light burnt out on the 2nd day ,. so i kept the button,wiring , bracket assesmbly on and jus replaced the bar. it turns night into day i kid you not, i cant even drive near the main roads with out traffic flickering their high beams at me as if too say ITS TOO DAMN BRIGHT! i made my a bracket out of a old metal tv wallmount i had laying around and it fit perfectly

Thanks dude, very helpful video, I'm definitely doing this

Awesome freaking video. Thanks brother you've helped me out.

Best video even for 5 pin regulators I used this info on my 200cc 4 stroke Lifan

Top notch shed life hack fella ! Ps the led flicker and the shutter speed are out of synchronization thats the double slit effect and quantum physics right before your eyes

Thanks for that great tutorial. Do you know if you can also run a front and back light ?

Wow thanks I was looking to put a light on a 25 motor in a Suzuki rm125 frame thanks for that

That is the best diagram iv ever seen that’s ace man 😂

Explained it well enough

i did it exactly and it gets brighter as is revs up

Have a up dated link to the the voltage regulator? Or the voltage rating it’s putting out? The supplied eBay link not available now.. thanks!

so if you do want a battery do the same thing but connecting to the battery and then battery to rectifier then rectifier to how ever many lights you want?

HI , DOES ANYONE KNOW ,WHAT WILL BE THE REGULATOR KIT FOR A APOLLO RFZ 125 (CHINESE DIRT BIKE) , IN ORDER TO PUT THE LIGHT ,THANKS

Hello great info but would it woke on a yx 140 i have a lighting stator installed

I like your handlebars can you give me some information on what your risers are in the handlebars thanks

so how would u hook up a rec if you don't have those 2 yellow wire ?

Quick question do all led bars have the same wires cause ive been looking no store shows what wires there are.

Anyone know if you could do the same wiring setup as the video only on an xmotos 125??

LOL LOL LOL😁 the same LED light bar as I have and my outdoor EL-WHEELCHAIR 😂😍🥳

My only question is where are those 2 yellow wires comming off of to be able to use those on the lights ...im kinda knew to bikes but I got every thing I need ...just wanting to know what are those yellow wires leading from .speciffically

I did exactly as you stated but my light doesn't turn on, can you help? I have a switch that has a light in it when it turns on but nothing.

Just asking so I only need a switch regulator and wires I have a light but didn’t know how to connect s

How do I hook the taillight and headlight up to my bike if it does not have a pig tail? I have a key to start it but it is a Kickstart. Help!!!

is that key on power or constant... does it shut off when you turn key off? Im going to have to see what my crf110 has ... it DOES have a little 3 prong connector, I have not traced it to see what it actually is.

I have a white and yellow wire, could that affect the way it works with the pink and yellow wires?

What if u wanna add a tail light turn signals and a horn how would u do that ? Or do u need a battery

Brother ty so much I needed this 🙏

Hi can i weld on my pit bikes frame where do i look for the batry its my firts time dealing with bikes now nothing

Have u anytime measured the output voltage coming from rectifier on positive wire. With load and without load what is the output voltage

How would you hook it up if there was no on and off switch involved?

Back the volumes intro 🤙🏻

How do you plug in more lights like signals tail light brake lights headlights turn signals horn how can I do all that without a battery how do you set yours up is it possible

Def trying this out!

Really helpful video

I hooked it up exactly like you did my lights turn on they flicker with the motor and then when I give it throttle the lights get brighter and burnout why please help

I did it and it worked flawless my brake levers have light switches in them so I added a brake light too

What do I do if I don’t have those extra wires? To be specific I have a 2013 crf80

Could you run some turn signals as well as a headlight from that same rectifier?

How did you wire them together? Did you splice them together or did you use connecters at the ends?

So the rectifier grounds its self through the chassis?

Hey man so I did the same thing but i just put the positive and negative wire into the harness it was bright for 2 secs then went very dim still light but not bright at all

What if you don’t haven’t 2 wires? I have just one a green and pink! Or do I just tap into the 2 yellow wires I have an Apollo 125!

how could i add a brakelight & blinker on a ssr ? any input from anybody would be appreciated i already have the oem ssr headlight kit on

Only get 3 v DC at idle have 7 v AC at idle The most I get is 11v DC from the regulator when on the gas. Any suggestions?

Brilliant video

Got my subscription. Thanks brother

So it means that there are 2 voltage regulator in your bike or your just using same regulator for ignition?.

Does this work on the Apollo RZF?

Great video now I know. Have you done any mods to the air breather? I just do not like that cheap foam crap it comes with.

Where can I find that rectifier? Your link doesn't have it anymore

I have a green and a white wire is this possible for me to wire a led bar

In case I only have one yellow wire. Coming from the stator, what then?

Thanks for the vid... I am trying to do an enduro conversion for my pit bike! This helps a lot

I need some help I connect the wires as you explained but the lights aren’t turning on

Will this work on my SSR 110 my wires are pink and yellow, thanks!

This video helped me out VOLUMES🤘

Do you have eletric start on your dirt bike? If so did you install it or did it come with it

What parts will I need specifically. The ebay links are outdated

So what do you do when you only have one spare wire available?

Me puedes decir cuales son los repuestos para intalar una luz

This video was awesome thanks

wierd thing my bike is a 125 tdr pro you can find it on ebay but the frame looks identical even though mine is from 2011

Is there any other one for sale that will work for a ssr? If so reply with the link

Followed these steps but with different headlights(higher watts). I get headlights lit up when I Rev the bike. Anyone knows why? Can it be the wattage of the lights?

Gonna put it on next week

Do you have to use the rectifier?

Thanks very much really good video

Update - some cheap regulators may fry the led's due to leaking spikes/transients, to avoid this, add a 12v battery as a buffer( any type e.g. SLA nimh nicd etc) If this doesnt work for you(dim/no light)... try connecting only one of the wires to the regulator, and ground the other ac side on the regulator to the frame, at first i followed this tutorial but turned out wrong for some stators, (i chose white wire, a bit brighter than yellow), now easily powers a 55w halogen full brightness on idle, so in the end you should have the regulator connected to one wire and a spare left floating, for testing purposes skip the regulator and use a cheap disposable halogen bulb to check your stator. if you want to stop flicker, add a cap or better yet a battery

Good video! Thx

and if I have a battery that I want to run in line so i can use my light without starting the bike? does the hot to the headlight just run to the battery first. Then a lead to the toggle then to the headlight?

hi,, does anyone know from where does the 2 yellow cables originally start from?? my dirt bike doesnt have any type of connection for lights. thankss

So you'd be able to add a battery then run them charge wires to your battery, then use the battery to light the light

This work with the Apollos?

Would it be possible run a tail light too?

By the way I looked at the wattage On the light you purchased it’s not 18 W it was 36 W so the light that I have purchased that was 18 W I have to return because they shorted out. Just purchased 36 W LED light bar that’s waterproof so hopefully it to work

Any links for a voltage regulator. The one u posted says it's no longer available. Thx for ur time

Is the rectifier something you added or relocation? And do you have to add one? Or can you skip that? And wire into existing wiring and leave it running as long as engine is on? Off when killed right?

Great job

So can you skip the rectifier and the light switch and just run the light streight on the two unused yellow wires so it will always be on when the engine is running? Am I understanding this correctly the light will be weak on idle but will go brighter with engine revs without the rectifier.

Great vid, any way I could run a light and a horn without battery ?

I followed your steps , but when bikes idle Light don’t works only when I rew it up , To half throttle

I only have a positive running off the magneto and another wire that I think is a ground, do I wire those the same as the two yellows on yours?

Sick ass intro!

So is a Rectifier needed or is that just to make it not flicker and get brighter as you throttle up? Is it possible to just hook up a light and switch?

Hast du einen Link? Zu dem Teilen für das Licht umzubauen?

Hey i have a question why does the light flicker when riding

I wanna know a well! Rzf???? Does it work?.....

Hi mate I’ve just done this to my pit bike as I had a little light bar but it’s a 30w and the light comes on as the revs raise. So just wondering what watt and volt light you used. Cheers buddy