High reach forklift

No video

High reach forklift

Рет қаралды 97,543

Kasiano Harris

Күн бұрын

Crown high reach forklift

Пікірлер: 169

@TheAnthonyfraser 2 жыл бұрын

Hear that express lower kick in!! Beautiful, quick, blend turning is on point.

@Virjunior01 2 жыл бұрын

I JUST started learning reach last week. I fiddled with turning and moving at the same time and shit... that's a different language. That's operating like you playin Street Fighter. Much respect

@TheAnthonyfraser 2 жыл бұрын

Yeah bro, using that machine the way it was ment to be used, otherwise crown would of disabled the hydraulic use while turning!! Fuck these other clowns on here with their turning while raising comments zzzzzzz putting me to sleep, keep doing what you doing. Safe in my books

@Virjunior01 2 жыл бұрын

@@TheAnthonyfraser Quick tip... it's: Could've (could have) Would've (would have) Should've( should have) Makes you look better

@TheAnthonyfraser 2 жыл бұрын

@virjunior thanks for the tip....coin dexter (you're a fucking nerd)

@natem1982 Жыл бұрын

@@TheAnthonyfraser you're kidding right? the only reason he can do that is because these boxes are hella light. if he was lifting even 500kg (i'm sure that lifter can't do over 1000kg) he would've tipped over. mfer was turning sideways while the load was damn near 15-20m high. you're trippin bro

3 ай бұрын

Smashed the pallets on the first level when going in, that was the only thing I saw bad!

@jamesboylan225 2 жыл бұрын

Everyone experienced in my warehouse moves like this, judging by the comments we’re fast and a safety issue 😂

@TheGheseExperience 2 жыл бұрын

It’s fast, but it is not safe. OSHA has warnings against it, as does the literal manufacturer of the forklift. It’s one thing to forget OSHA, but it takes a lot of ego to act like one knows better than the people that designed and built the machine. We’ve had two tip overs from guys doing exactly that! Turning while elevated.

@beansoupsbrother1566 2 жыл бұрын

You're just more likely to crush someone etc

@luwigi4630 9 ай бұрын

Been turning 3,000 lbs at F level for years. Nothing.

@dancearoundtheworld5360 7 ай бұрын

sometimes no room to go back far enough to lower it

@bryanmares5943 4 ай бұрын

gonna be driving these next week never driven forklift before..see how it goes lol.

@YaflamingGalah 2 ай бұрын

how did it go?

@bryanmares5943 2 ай бұрын

@@YaflamingGalah I wokeup my first day hungover and said chale let's go get a beer😂

@RealTalkInAmerica Жыл бұрын

Not taking away from this guy, but as an RSR Walmart DC driver I must say we are FORCED to go this speed, because Walmart hands out Writeups like God hands out air to breathe......no matter how awesome you perform/how energetic you are/how ethical you are/etc, there's Always a Write-up waiting around the corner once a month.......ie: Production/Housekeeping/Shrinkwrap disposal/etc etc etc etc the list goes on. That's why my specific warehouse can't keep anybody, they've established a Write-up Adult Punishment culture out there.

@Eenot Жыл бұрын

Do u happen to know what to apply for to get that position in walmart? I use to be a order filled for Walmart

@peterpanbigdick. Жыл бұрын

Hi that what happens when you have no unions in your country and you should keep them and use them in court for harassment charges.

@luwigi4630 9 ай бұрын

What a shame. Thank you for the warning. I won't apply there until the day I lose all self respect for myself. Sounds like a daycare center for adults.

@troywarlick9343 8 ай бұрын

Bro fr! That's how tsc is. Talking bout, you were the last person at that spot, and there is Hella plastic and broken pallets, (even though it's been there all day) here's your write up. Oh, and remember to be safe, but also, don't let your productivity drop below 100 😅

@mikellpadgett3565 7 ай бұрын

Honestly this wasn't even that fast either

@stefanberg963 3 жыл бұрын

Mad respect to this guy, he is so fast.

@i.g.d8480 2 жыл бұрын

Un trabajo muy duro para el cuello y espalda , que recuerdos con la Linde..

@Virjunior01 2 жыл бұрын

Yes! You need to learn how to move your body with the truck. Like riding, motorized pallet-jacks, it feels a bit like skateboarding, snowboarding or windsurfing

@porkbeans9907 15 күн бұрын

🎶 “There ain’t nothing like a Crown, for picking it up and putting down “ 🎶

@stephenkolifrath3622 Жыл бұрын

You slammed into that skid on the floor

@jaggervalenti5183 3 жыл бұрын

Says in the Crown Operations manuals on almost all their lifts not to turn while elevated. Huge safety risk.

@capital0716 3 жыл бұрын

Obviously you never droven a reach truck😂

@Zociety6477 3 жыл бұрын

@@capital0716 facts 😂😂😂 dude would fire me and deem me a terrorist

@ericklopez3873 2 жыл бұрын

lol try working at lineage in Mira loma!! You have to turn at an angle in order for the pallet to fit!! I don’t think you’ve worked at any warehouse lol

@Virjunior01 2 жыл бұрын

It is. If you suck balls 🤣

@kylethisismylastname6737 2 жыл бұрын

Not allowed at my job, people still do it all the time though lol

@robertawiese 7 ай бұрын

Watching a master work at his/her trade is so relaxing… not sure why😊

@SR1Records 3 жыл бұрын

Jesus Christ! Nobody ever copy this guy! Please! Apart from the so many other problems the guy really placed a pallet on the racking, notices it was sticking out too much and just pushed it? Without lifting it up first? Wow!

@johnlagan2160 3 жыл бұрын

Thank god for strong racking obviously it must have been a light pallet

@teejay853 2 жыл бұрын

Push it in to lock in place.youve obviously never put away pallets in racking before lol

@beiramar1582 Ай бұрын

Tell that to management who enforces production standards. You obviously never worked in a fast paced distribution warehouse like Kroger or Walmart. Numbers are first safety is second. 🎉 🤡

@mywa8314 7 күн бұрын

Sometimes, they don't fit all the way in too

@stronginthesun Жыл бұрын

Do it for any length of time . Neck and back problems in later life

@Fury-cl3fn 2 жыл бұрын

My current and new job is training me on this type of equipment. I can get the controls and i know how to drive it, but that aisle is kicking my ass. If I can drive down those aisles half as good as this dude, I'll be straight.

@briley0 2 жыл бұрын

its all about the pivot point. learn where to line up to turn into the racking. practice it. youll have it down in no time

@Virjunior01 2 жыл бұрын

@@briley0 yup! My trainer told me to basically estimate the distance between the front of the load and the truck's feet, and try to match it before going 90. It really does work. I do feel for lefty operators, though. These machines are not made for them.

@briley0 2 жыл бұрын

@@Virjunior01 that’s me. i’m the lefty operator

@Virjunior01 2 жыл бұрын

@@briley0 bruh, how is it for you?

@briley0 2 жыл бұрын

@@Virjunior01 it at first was just extremely difficult. after a few days of messing around with the reach i had a good understanding of where my boundaries are. most of the time it’s just a prayer that i don’t kill myself

@truebeliever4006 Жыл бұрын

Homeboy always bangin shit with those 2 bottom arms. I drive a crown and I don't got those. I don't got the forks that extend like that. My crown picks up and down pallets weighing a ton...2000lbs

@Luckingsworth 5 ай бұрын

Completely different truck. Thats an RC. Its a regular forklift meant for stacking off the floor only. Not for racking like this.

@henryreyes1597 8 ай бұрын

Nice job👏👏

@user-vj5js1hg4e 3 ай бұрын

Ight i'll be the douchebag i guess.... I work for walmart dc. Our racks are about 6 inches closer between racks in a lot of areas. This gentleman extended his forks before picking up the pallet. What that means with the lift being used, almost zero room for error when picking a pallet up quickly and efficiently. (Also meaning downtime when putting said pallet into rack or module slot.) I WISH I COULD GET A CLIP OF ME XDDDDDD 1000% id ruin the rsr world in one clip. Btw w.e warehouse this is... you guys need some serious wheel replacements/flooring. *SCREEEEECH* every flick of the wrist xD P.S. I Can scan faster and move freight faster than anyone ive seen in any video ever submitted.

@Mr-whistle 2 ай бұрын

today was my first day, I need more practice, I will be good !

@rolandborbas1710 3 жыл бұрын

In my opinion this guy absolutely 💯 a "HEALTH AND SAFETY ISSUE " turning with forks raised 👏🙄👍

@JohnMaffina 3 жыл бұрын

yeah sack him.

@johnlagan2160 3 жыл бұрын

Listen all forkies have done it never do it with a live load like bottled water

@glossalth 3 жыл бұрын

@@johnlagan2160 yes we all have done it .but yes as u said a live load , out drop and then turn .

@johnlagan2160 3 жыл бұрын

Never dropped a pallet on a reach truck on a counterbalance i have from a curtain side

@korassan556 3 жыл бұрын

If one is not to raise the forks in turning it'll take to long time, uneccesary waiting time. If one is skilled enough and not as the most noob operators out there it is completly safe. I did this to. And i am very skilled,so did my co workers who also were skilled and we told the noobs to slow it down skill they dont have the skill. You have to understand how a lifter operates and "feel it". Every real forkers know this

@wearerhome1412 2 жыл бұрын

You can tell the real warehouse jobs when they get a seat on the Forklift. I drive a lift at Costco and we just get the basics. No sideshift, no light, no seat and no speed lol

@wearerhome1412 2 жыл бұрын

@@kasianoharris6289 I'm saying "you" work a real warehouse job. My job is trash lmao

@Lanterns_light 2 жыл бұрын

My country is hyper anal about turning with load raised. Most workplaces are pretty lapse about it. But even then, most of them wouldn’t have liked that turn there man…. Lol.

@Master_Mayhem_Official Жыл бұрын

This is true but i work in a cold storage warehouse that operates reach trucks twice this height and they don’t care as long as you know you can handle it. Obviously that would differ if an OSHA representative was there (which they never are). But as long as you’re smooth and slow with the turn as you’re raising the pallet up, nothing bad will happen. But to go against what i just said, if a safety committee representative as my self were to watch you do this, we’d definitely say something and write you up if it kept happening(because that’s our job) but we turn a blind eye to it because it definitely increases productivity. But it is definitely not the right way to do it.

@hawkinatorgamer9725 Жыл бұрын

@@Master_Mayhem_Official The racks in this video looks I would guess close to 30'. You work in a warehouse with 60' racks and have reach trucks to reach that height???

@Master_Mayhem_Official 6 ай бұрын

@@prabhdeepsingh1 do it. Lmao

@user-rc5hk5iq8j 9 ай бұрын

Turning and operating with your forks raised is an OSHA violation, unless you're a reach truck operator then it's just your average tuesday lol

@raylafleur6616 2 жыл бұрын

I can drive it but man I can’t drive it like that. I sure as hell try though. It’s the aisles I struggle with. I’m always hitting the rack with the outriggers.

@kasianoharris6289 2 жыл бұрын

One day at a time brother, keep at it.

@warrenmull10 Жыл бұрын

I can’t learn these to save my life

@stephenmurphy6880 2 жыл бұрын

It might not be by the book safe but if everyone moves like this at a workplace and you the only one moving by the book (slow) you not gonna have a job for long

@EveryDayQueen79 17 күн бұрын

Facts this is exactly how I drive…. You will never make rate at my job while going by the book… the faster you can get your forks up and squared up is the best way…. And I’ve never almost tipped over by moving while tuning my lift

@jason2077 Жыл бұрын

Look at your front wheels mate, you just pushed that pallet in the A location. Also, don't turn with your forks in the air in a KZfaq video. Or push the pallet while it's resting on the racking beam. I have to keep editing this comment as I continue watching the video...

@siphumezembadamana6932 6 ай бұрын

He is great but the way he is doing it is not safe. Turning and lifting forks same time is not safe

@R3IsL 2 жыл бұрын

the squeaking.... one of the forklifts at my warehouse had a very minor squeak on one of its wheels and it was also a bit of a bumpy ride but It got fixed eventually, but that squeaking.... shit nearly drove me mad but this is infinitely worse, how can anyone work like this? also, damn I cannot operate the standups very well tbh, I always gotta set the speed to 2 and drive fucking slow as shit

@Ohstopitdrose98 6 ай бұрын

Crowns ❤

@edgarJM903 2 жыл бұрын

I see that guy sitting down in our job they are stand up reachtruck

@robertoh.20 Жыл бұрын

You're obviously dumb, a lot of stand up reach trucks have foldable seat to be used if you desire

@Balsley1105 Жыл бұрын

He’s good, just needs to use his reach function more instead of driving into the rack

@secretlover528 Жыл бұрын

He had no hydraulics or reach function

@vision8079 9 ай бұрын

Reach is used for deep pallets

@Balsley1105 9 ай бұрын

@@secretlover528 he did, are you blind?

@Balsley1105 9 ай бұрын

@@vision8079 No, you have it all wrong

@EveryDayQueen79 17 күн бұрын

He would be a tad faster as well extending out the forks while driving in

@glossalth 3 жыл бұрын

Yes a perfect example of how not to drive a high /reach .

@johnlagan2160 3 жыл бұрын

Puts the pallet in the beam then drives it in that can bring the racking down if the beam comes off

@treffabrown1098 2 жыл бұрын

@@johnlagan2160 depends on the pallet

@Boyboyzola 3 жыл бұрын

That boy quick

@JamesRobin-ss9sk 8 ай бұрын

DO NOT ARM WRESTLE HIM WE NEED HIM, BACK AT WORK TOMORROW.

@j26fremont 2 жыл бұрын

An accidental thumb forward on the stick while raising and turning and it's game over. Gotta be in your game and know your weights.

@WDFFChief787 Жыл бұрын

Bullshit. Tell me you haven’t drove one without telling me. Do this shit all day everyday and even though the mast sways, there is no fear of an issue. The only reason these have tipped is cause people catch racks and knock themselves over

@johnlagan2160 3 жыл бұрын

Why to go just push the bottom pallet out so it hits the other one behind it if someone was standing there they could have got hurted

@sawreal9720 9 ай бұрын

Dietz and Watson?

@raturoko94 2 жыл бұрын

But he moves back then forward to go in. Why can’t he just swing around and go in, in one movement 6/10 for me.

@dineshbhat6585 Жыл бұрын

wow superfast

@vitelavitela3232 3 жыл бұрын

Que empresa es bro

@nickhayzz 2 жыл бұрын

Even at Home Depot we turn and drive in or out, the aisle’s are way to narrow to not do that LMFAO

@KDBHonda256 Жыл бұрын

No they are not. Plenty of space.. y'all just need better skills and def more training. Btw this guy is a terrible example of a reach truck operator.

@nickhayzz Жыл бұрын

@@KDBHonda256 no, at least in my store. There are only a select amount of aisles to actually square up. In my paint aisle you have to turn into a pallet to get into it, there's no way not to or you are hitting the racking. trust me, I tried.

@Myvisionn1996 Жыл бұрын

@@nickhayzzsame 😞

@cardinals845 2 жыл бұрын

What’s the pay

@aaronfregoso8845 3 жыл бұрын

First of all reach trucks are meant to stand up in not sitting down no time to get off if a tip over happens and bad mechanics supposed to square up to location before raising or dropping forks “F” for Fail

@ttech2032 3 жыл бұрын

Jungheinrich etv

@mrb6206 2 жыл бұрын

Lol you're such a nerd, and you're wrong too. You DO NOT get off the forklift if a pallet tips over, that's what the fucking roof is there for. People die by trying to run away from a load falling, so stop spreading your bs so confidently please

@natem1982 Жыл бұрын

i mean he can only turn and lift like that safely because the boxes alone are extremely light compared to the lift capacity.

@EveryDayQueen79 17 күн бұрын

Well I guess I fail everyday cause this is the exact lift I drive and I operate my lift just like he does

@johhnn143 2 жыл бұрын

Slow is smooth smooth is fast👌

@akaligosti 3 жыл бұрын

Bro im forklift operator

@jer_smith21 Жыл бұрын

For you its fast ? Use a Raymond its more easiest to drive and go fast

@moisesgonzalez9845 2 жыл бұрын

I BEN DOING THIS JOB FOR OVER THAN 10 YEARS N I ONLY MAKE 19 PER HOUR

@johnhazenii463 2 жыл бұрын

So slooowwwww

@dantesiru975 3 жыл бұрын

Too much weight on the shelves to be moving like that

@philipbirchall4698 10 ай бұрын

Cant be that good if he needs a camera.

@sabujsabuj9984 3 жыл бұрын

I can do it. I have 14 years experince.

@viavlogs1901 3 жыл бұрын

Nobody asked thoe

@alasdairbrown8368 2 жыл бұрын

You both can't spell. Never mind drive a forklift.

@scottshingleton7659 Жыл бұрын

It's cake, I've only been doing it for a little over a month and even though I don't work in the aisles because I'm not aisle certified, I'm pretty good on the dock and have even worked on the back rack. Our aisle certification training takes 40 hours to complete. We are strict about the 2 bay rule, if anyone breaks it, they are fired right away.

@romeo21vln 8 ай бұрын

This lad failed all safety instructions.. should be removed from truck right now..

@hakeemdavis6653 10 ай бұрын

My job took the seats out then mfs

@mickbator6979 Жыл бұрын

FUCKIN BOSS

@thefountain6634 3 жыл бұрын

Dude is slow compared to how i used to drive. Oh yea i was the most safe n unsafe forklift operator broke all the rules

@EveryDayQueen79 17 күн бұрын

Yessss

@jaredteo5117 Жыл бұрын

Blending too much

@Designer6 Жыл бұрын

So many bad habbits in here, turning around with load up so dangerous, truck loosing so much of stability because of that its just a matter of a time when this man will make an accident

@EveryDayQueen79 17 күн бұрын

I’ve been driving this exact lift for years and years just like he does

@user-qg8fy6id3t 3 жыл бұрын

Epic failure no hanbrake use smashed into bottom.pallets and about 20 other faults. Is this a spoof 😂

@Zociety6477 3 жыл бұрын

Thats what the riggers are for goofball. You go all the way into the rack to reach the back bay. Turning while raising forks is necessity if you want to get in some of the locations at my job. Lol if you dont want people hitting pallets dont use the A loc

@TheAnthonyfraser 2 жыл бұрын

Errrrr if you knew this machine, then you would know there's no handbrake on it aye..........

@user-qg8fy6id3t 2 жыл бұрын

@@TheAnthonyfraser err you will find I am right any reach truck I've driven has an electronic handbrake. It comes in the form of a button. I hope you aren't allowed anywhere near MHE you dingbat ... aye and all that shite 🤔🤫😂😂😂

@user-qg8fy6id3t 2 жыл бұрын

@@Zociety6477 clown have you heard of health and safety apparently not. 🤡🤡🤡

@Zociety6477 2 жыл бұрын

@@user-qg8fy6id3t I'm the clown but you don't actually know how to operate a reach? Lmao. The little arms on the front are made to hit the skids and you can push multiple skids around too. How's that unsafe sped