Hobie Revolution Using Kayakbuddys Gas Engine Drop-in Mount and Honda 35cc 4 Stroke

Рет қаралды 32,189

KAYAK BUDDYS, LLC - LIGHTWEIGHT PROPULSION SYSTEMS

5 жыл бұрын

The gas drop-in mount for Hobie and virtually every other pedal drive kayak system has been completed and today was the first time to test the system with the shortened drive. The cassette is the only difference in the system to be expandable to other manufacturers. The engine outperformed what I thought I could achieve using the smallest mini-4 stroke. The top speed at 75% throttle was 6.6mph and totally stable. Although not neccessary, the 50cc 4 stroke should push this close above 7.0mph easily. The 50cc would be more than adequate for heavy 100lb+ kayaks and larger paddlers.

Пікірлер: 54

@brightonkayakfishingfirm7398 5 жыл бұрын

I think your set up with the engine is epic I have a engine to so much fun

@kayakbuddysllc-lightweight4947 5 жыл бұрын

Brighton kayak fishing firm thanks for the compliment. I thoroughly enjoy adding power to our fishing machines. More to come on the horizon.

@mluc1111 3 жыл бұрын

Love ur kayak seat, can u show us how u build them. Thinking about getting this motor. Great video thank you for sharing 👍

@robwoodall7162 5 жыл бұрын

Go for it nice

@bennyhill3642 2 жыл бұрын

I would like to know. Have you tried the 50cc in that hobie? And if so how fast did you get in it!? I can't wait to get one of those suckers on my hobie!!!

@mcrowellmallari269 4 жыл бұрын

Would you sell the shortened shaft separately ?

@mluc1111 5 жыл бұрын

I like ur kayak seat can u please do a how to video thanks

@thebear1947 2 жыл бұрын

I'm interested in your setup. What happens when you hit something? Does the shaft bend or does the motor pop out of the pod?

@kayakbuddysllc-lightweight4947 2 жыл бұрын

If you ground the engine you could break the mount locks and that is the occupant's error, not the fault of the drive. If you hit debris, it normally deflects, but since I have yet to experience anyone having issues I can only base this off of my experience. it is a very robust gearbox and stainless prop. You would break a shear pin before damage occurs on the drive.

@zhichaogong6826 2 жыл бұрын

Hello, I want to ask where the propeller of your motor was bought. I have a hobie outback and a motor that is exactly the same as yours, but the motor comes with a 3-blade propeller. I can’t find the double-blade for a long time. Of 😭

@kayakbuddysllc-lightweight4947 2 жыл бұрын

These are my designs only. You will not find them anywhere else. You can order on my website. Www.kayakbuddys.com. They are 100 with collar and shear pins + shipping.

@vnicknguyen 4 жыл бұрын

Can you give some information on your seat setup? im looking at options for a raised seat for my 07 revolution

@acadventures7799 3 жыл бұрын

Not a revolution but im confident this will give you an option. kzfaq.info/get/bejne/qsB1lrN92LrIaWQ.html

@anewguy08 4 жыл бұрын

can the motor lock for straight forward position, so the rudder can be use?

@kayakbuddysllc-lightweight4947 4 жыл бұрын

WestCoast you can tap a bolt in the mount to keep it straight if needed.

@filipe6953 5 жыл бұрын

what type and were did you get the stabilizers ?

@kayakbuddysllc-lightweight4947 5 жыл бұрын

filipe you can find them under accessories on the www.kayakbuddys.com website.

@CamboKris214 4 жыл бұрын

Where did you get that seat at I need one like that for mines I hate the old seat they hurt my back

@kayakbuddysllc-lightweight4947 4 жыл бұрын

Southern Catches Fishing that is a modded millennium seat on aluminum bars that run across the width of the Hobie. I had to drill and add grommets to fasten through the side of the handle area.

@CamboKris214 4 жыл бұрын

Kayak Buddys - Kayak Propulsion Engines I like the setup I have the same model revo, if you can make a video of a demonstration on how to lmk I really like the mod

@acadventures7799 3 жыл бұрын

@@CamboKris214 kzfaq.info/get/bejne/qsB1lrN92LrIaWQ.html

@davidvelasco5977 4 жыл бұрын

La verdad es que tiene pinta de ser divertido darse una vuelta con eso pero el escape le hace hacia arriba por lo que al ir hacia adelante el humo te tiene que dar directamente en la cara

@kayakbuddysllc-lightweight4947 4 жыл бұрын

David Velasco I do not speak Spanish. Please translate to English. Thanks.

@dannysingletary9648 2 жыл бұрын

Where can I find a video or info on the seat mod you have?

@kayakbuddysllc-lightweight4947 2 жыл бұрын

Danny, I took the mod off due to the poor ergonomics of the Revo. It seemed to work just fine at the beginning, but I felt after sitting in it for a bit of time, it still didn't feel right. It was better for sure, just not to my liking.

@KayakQ 5 жыл бұрын

Nice setup! I might want to do this to my Revolution 13 ...if you need a front angel camera check out one of my videos and you will see an easy set up!

@jsyangyu 4 жыл бұрын

Nice try. What is the maximum speed if I missed in your clip?

@kayakbuddysllc-lightweight4947 4 жыл бұрын

yu yang the speed varies from 6.3-6.7 mph. Great acceleration.

@kayakfishing9194 4 жыл бұрын

Okay where can I buy a stabilizer or float.

@kayakbuddysllc-lightweight4947 4 жыл бұрын

Look on my website under accessories and you will see the various parts you can purchase. Www.kayakbuddys.com

@robwoodall7162 5 жыл бұрын

Were did u get the Honda

@kayakbuddysllc-lightweight4947 5 жыл бұрын

rob woodall I sell the setups and parts on my companies website.

@kayakbuddysllc-lightweight4947 5 жыл бұрын

rob woodall you can find the information on www.kayakbuddys.com.

@johnsiren3027 Жыл бұрын

How’s noise n fumes?

@kayakbuddysllc-lightweight4947 Жыл бұрын

It is a 4 stroke and the emissions are 95% emission free due to the catalyst and muffler that Honda has developed. If you are sitting still you may get a hint, but underway I have never felt it was an issue.

@kayakfishing9194 4 жыл бұрын

Hola, Donde puedo comprar un estabilazor

@kayakbuddysllc-lightweight4947 4 жыл бұрын

Jorge Omar May Torres can you reply in English please. I do not speak Spanish. .

@leslielebehn6414 5 жыл бұрын

I no one. time

@88krazie 5 жыл бұрын

Here's the other problem with that thing. at those high speeds, if you hit something, say goodbye to your mounting area in your Hobie, it will most likely crack in that area over time anyway. Again these kayaks were not designed for that use.

@kayakbuddysllc-lightweight4947 5 жыл бұрын

oespo oespo19 you have no experience in this area. All negative and absolutely no positive ideas to offer to the kayak community. I have outfitted 100’s of kayaks and guess what, no issues, cracks, or hull destruction. Please stop being ignorant. To each is own. I laugh at people like you for the lack of learning to let people do as they please. Move on my friend. Keyboard warrior.

@squidlips2246 5 жыл бұрын

Everybody’s such Debbie downers¡ of course it wasn’t made for it. Why else would we bolt it on ya clowns…,,I finally fitted my leg to the motor. Gonna test it in Hawaii for ya¡

@TheGdspruill 5 жыл бұрын

You need to go get it registered with the Marine police because you're running illegally under power in a kayak

@kayakbuddysllc-lightweight4947 5 жыл бұрын

GottaGo kayakfishing Adventures for your information my company has a commercial license to test outboard engine systems. Due to mounting on a multitude of boats that I trial, I carry my documentation on every outing. FWC is fully aware, so trust me I have it covered.

@craftrunner 2 жыл бұрын

What who cares about the river police, get a life

@88krazie 5 жыл бұрын

Way too noisy and Hobie's were NOT designed for that type of speed. Recipe for disaster there at some point. In this everyone suing everyone world be careful on selling this. It may come back to bite you guys.

@kayakbuddysllc-lightweight4947 5 жыл бұрын

oespo oespo19 remember when you outfit any craft with a motor it is the buyers responsibility to control the craft. As far as noise, the camera is a foot or so away from the engine. It is never an accurate sound account of the sound decibels and frequencies captured from the exhaust. This is why I make an electric that is faster than the gas on the light kayaks. Some people have large Hobie PA models and these can not paddled for long durations for the average owner. Gas gives options whether it is in front, on the side, or in the rear.

@rudydiazrn2719 4 жыл бұрын

You must be an over protective mom... what are you saying bro, that these make noise and are a little dangerous? Obviously, your going faster and everyone knows kayaks were not built to have motors, but now they can... also your saying they might get sued? Anyone can take anyone to court, even you oespo. I for one fully appreciate the video's and options now available. I'll be ordering mine soon ;)

@J91681 4 жыл бұрын

@@kayakbuddysllc-lightweight4947 You mentioned an electric that is faster than a gas on the light kayaks? I have an outback I would like to motorize, however most people only get around 4 mph top speed with a 30lb thrust trolling motor. What is your electric option that is faster than the gas for light kayaks?

@kayakbuddysllc-lightweight4947 4 жыл бұрын

J H for large kayaks gas is still the best performer. The electric is more of a an idea that works, but it just doesn’t compare to the long term use and simplicity of gas. Rear mount gas with foot controls or tiller extension. Certainly less failure points than electric.

@craftrunner 2 жыл бұрын

The hobie will handle it easy as, will some people go get a life. This is a great setup