@rogermcdonald1607 3 ай бұрын
Looks like you have been busy Bill. Homelite made pretty good products. Brock over at lewis mowers is giving you some competition as he has acquired 4 minibikes!👍🎥🇺🇸
@GuysPlayingWithTools 3 ай бұрын
I saw his minibike. I am pretty jealous (I don't have one at the moment). People give Homelite too much grief, they are the best low end weedeater you can buy(more on that later)
@dnrsmallenginerepair 3 ай бұрын
Good fix my friend
@GuysPlayingWithTools 3 ай бұрын
Thanks 👍
@WoodandMetalGarage 3 ай бұрын
right on have a Homelite 14 inch chainsaw and like it a lot.
@GuysPlayingWithTools 3 ай бұрын
I like them, they aren't quite as tough as a more expensive one but they have the best bang for the buck you can get anywhere
@dfields9511 3 ай бұрын
another save. I have saved a few of them, on occasion cannot save them when owner used strait gas. used seedeaters they don't sell well around where I am. most I have ever gotten was 70 I think for a old RedMax. my personal one is a old Murray from WallyWorld. made by MTD so its basically a Troybilt. it works great, only have had to replace throttle cable and bump knob retainer. of course I am not the atypical home owner. I actually use ethanol free gas mixed with full synthetic 2 cycle oil. the Murray m2510 its on it's 7th season I think and running good
@GuysPlayingWithTools 3 ай бұрын
I always check the cylinder before buying them, so I don't get any that are burned up. $70 is decent for a RedMax. The most I sell weedeaters for is $150 but that's reserved for high end commercial units. I usually ask $75 for nice straight shaft box store weedeaters and give curve shaft units away really cheap.
@lewiemcneely9143 3 ай бұрын
WHAT in the world are you doing with a COAT on? It must be down to 95 degrees! Strange spring weathger. Homelite makes good stuff. I think my 1st saw was a C-5. Happy weekend Willy Bill. Stay out of jail. Rain here again but not heavy till this evening when the boomers start.
@GuysPlayingWithTools 3 ай бұрын
🤣 I do videos 2 months in advance and pick out what to release twice a week. It was probably in the 30s or 40s out that day, I don't wear a jacket unless it's below 50. I will try to stay out of jail, no promises 🤣
@lewiemcneely9143 3 ай бұрын
@@GuysPlayingWithTools Close enough on the jail time. Might ought to start a Go Fund Me for bail money. I knew it had to be cold for you with a coat on.No green grass either. Mowed again and we've got ONE lemon lily bloom. I guess summer snuck in. Happy weekend to U 2!
@GuysPlayingWithTools 3 ай бұрын
@lewiemcneely9143 The spring rain woke my yard up a few weeks ago. You wouldn't guess it by that video, but I am cutting every 4 or 5 days now. It's not hot yet, so I am doing it at a reasonable hour. In the Summer I cut at 5:30 or 6:00 am.
@lewiemcneely9143 3 ай бұрын
@@GuysPlayingWithTools It's still 70/80 without the humidity here. I've been going at it around 2-ish and so far, so good. When it thickens up (the air) I'll pull a Wild Bill and go later myself. Been moing every 2 or 3 days just because I can. Growing an inch or two then. Just rain, no additives and cutting 2 inches on the mower. Job security!
@GuysPlayingWithTools 3 ай бұрын
@lewiemcneely9143 I am into the yard for 2 rounds of fertilizer so far, and it's growing like crazy. It's been in the mid/upper 80s so far. I cut at 7 until it gets into the mid 90s and then I switch to summer mode, 5:30am 🤣
@dnrsmallenginerepair 3 ай бұрын
That's the same carburetor that's on my Ryobi
@GuysPlayingWithTools 3 ай бұрын
Maybe slightly different linkage but yeah, they are mostly the same.
Learned From Dad
Рет қаралды 30 М.
Guys playing with tools
Рет қаралды 294
24 Канал
Рет қаралды 94 М.