Honda Rancher 350 Rear Brake Cable Replacement

Honda Rancher 350 Rear Brake Cable Replacement | Partzilla.com

Рет қаралды 103,344

Күн бұрын

Your Honda ATV rear brake cable replacement parts: bit.ly/honda-ra...
Learn how how to replace the rear brake cables on a Honda Rancher 350. John shows you how to disconnect both the foot brake cable and the hand brake cable. Then, he’ll show you how to replace the foot brake cable in a matter of seconds with no tools. Next, John will show you a garage hack to get your new hand brake cable through the complicated routing between the brake handle and the rear brakes. Hint: you’ll need some tape.
Looking for more Rancher brake maintenance? Change the rear brake shows on your Rancher:
• How to Change the Rear...
Change the brake shoes on the front of your Rancher:
• How to Change the Rear...
Read how to do this step by step: www.partzilla....
VIDEO HIGHLIGHTS:
Disconnecting brake cables - 1:14
Replacing foot brake cable - 2:25
Replacing hand brake cable - 3:45
Buy Honda ATV parts here: www.partzilla.c...
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2003 Honda Rancher TRX350TM, but you will have similar steps for your Honda ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
Honda Rancher oil change:
• Honda Rancher 350 Oil ...
Honda Rancher air filter change:
• How to Change the Air ...

Пікірлер: 57

@rcknrbn01 6 жыл бұрын

John - I recently purchase my first ATV, a 2008 Trx500 Rubicon that needed several body parts. I stumbled across Partzilla and have ordered numerous parts. About to order the rear brake cable. Very informative video, thanks for explaining it in an easy to understand format.

@GenerFriesen 2 жыл бұрын

That trick you used to pull the cable through is a great idea.

@llaw31 Жыл бұрын

I'm 5 years late. But super great full for these videos ! Also this 350 literally has had everything done to it ! Good for another 15 years easily

@marcrawlinson9746 5 жыл бұрын

Excellent video! I have the exact model, year and color. I picked mine up from the dealer yesterday. They wanted $280 for the cable and new foot pedal. I found both parts on Ebay and Amazon for under $40 bucks... after seeing this video I'll be doing everything myself!!!

@user-kk1vp2pn5n 3 жыл бұрын

i have the same model and the same problem would you mind sending me a link?

@wildcatindustries8030 Жыл бұрын

I’ve done this technique before but not on an ATV, we have 7/8in sand line on my service rig that has to go through the crown at the top of the rig, it’s a good 40-45ft up and to attempt to get around it we fed the new cable through having it taped to the old one and it did work well. You can do a lot with a little bit of black tape

@wilfredotorres3953 Жыл бұрын

Mr. Talley. Does it again👍

@HB-yq8gy 5 жыл бұрын

Nice tutorial very basic simple repair. Thank you very much!

@becraftc 4 жыл бұрын

How did you get the wheel off using electrical tape? I have to use a lug wrench or impact. Just kidding. Nice video, you give a great step by step explanation. Thanks.

@sputnictyler6673 6 жыл бұрын

Very good video. It helped me a lot .....thanks

@timschwartz4132 3 жыл бұрын

Thanks for the tutorial, John, very helpful!!

@IBRAKEFORBEDROCK 5 жыл бұрын

Does that model not have a reverse brake lamp switch? To me it looked like it was missing on the brake handle assembly. Maybe another DIY video?

@michaelbrannigan2529 5 жыл бұрын

Do you have a video of changing the swingarm bearings I'm doing it now and having a hard time with it

@briantahere5570 2 жыл бұрын

Easy to understand, not a million miles an hour

@jameshuckins8969 2 жыл бұрын

You rock sir thank you

@johnnycapriola2727 2 жыл бұрын

Can you do a video of changing tie rod ends honda 250

@nfsheatshortclips3710 2 жыл бұрын

The adjustment screws are not coming loose at all. How do I fix that?

@hookdalimits3819 7 жыл бұрын

I wish you guys had a video on how to adjust the rear breaks! I have no rear breaks and that's kinda scary on a hill as if your backing off the hill...

@myshihtzudontstink 7 жыл бұрын

I believe you just turn the little wing nut looking things over the brake drum. That will shorten the gap between the pads and the drum and also make it so your brake lever/foot brake doesn't go all the way down. I have to do some more brake work on my father in laws rancher soon. It's well designed so stuff is simple as possible.

@danielwhite6127 3 жыл бұрын

Uh do not use ur rear brakes if ur backing off a hill use or front the rears will flip you backwards 🤦🏻‍♂️

@jamesrandybrand1911 4 жыл бұрын

On my 2013 rancher my rear drum brake the cam to apply brakes was frozen replace the cam and the shoes but after all the cam will not release after applying the brakes

@Smalltechguy 3 жыл бұрын

John, my cable placement looks off on the top cable. The foot cable seems to go in with no effort but the new hand brake cable seems to go in at a steep angle. Is this normal or is the bracket bent that holds the pin and adjuster??

@BigCountryKracker 3 жыл бұрын

How is yours so clean? My cables are covered in dirt

@philipdove1705 3 жыл бұрын

I used to leave the brakes locked on when I had it in the back of my truck now the left hand brake is floppy. And the brakes always seem stuck on squealing so loud I need ear plugs . Do you know what it could be

@masongreen1871 6 жыл бұрын

O and can u do a video on valve adjustment for a 2016 foreman 500

@PartzillaParts 6 жыл бұрын

We'll add it to the list!

@Vermontwalleyeguy12.56 4 жыл бұрын

So my brother has a 2001 350 rancher It’s Canadian model the neutral safety switch light won’t come on or if it does we spend days trying to get it back on can you guy make a movie on how to fix this from start to finish and no the lights not burned out and not a fuse I think it’s that switch we’re the hell Is it and how do I fix it HELP HELP please!!!

@levibyrd4877 4 жыл бұрын

Will these work with a 2004 trx350fe ?

@paulquiroz4070 5 жыл бұрын

Hello again.... My brake pedal is jammed as well, how can I take it out o lubricate it?? Thank you in advance for the guidance.

@PartzillaParts 5 жыл бұрын

Should just be a cotter pin to remove the pedal. Pull the dust seals and clean it all out.

@djtally1140 2 жыл бұрын

im not the smartest in the tool box but try gas or break cleaner and let it soak under the liquid of the cleaner then take out and start twisting it ??? and repeat ?

@tresgregory6587 7 жыл бұрын

you should start doing videos with a 97 or newer 300ex so I can no how to work on it! thanks

@PartzillaParts 7 жыл бұрын

We will add it to the suggestion list!

@paulquiroz4070 5 жыл бұрын

Hi There, how tight should the hub nut be?? I do not have the book.... Thank you

@PartzillaParts 5 жыл бұрын

47 ftlbs

@jasontucker1701 7 жыл бұрын

I bought some coolant yesterday what the shipping business days?

@PartzillaParts 7 жыл бұрын

www.partzilla.com/index.php?p=shipping_quote

@gavinb6300 5 жыл бұрын

Will this be almost the same on a 2017 Honda rancher 420?

@masonmandl5560 5 жыл бұрын

Off-Road Life 101 no you have to take the front plastic off

@wyattmac9701 6 жыл бұрын

quick question i have a 2008 honda rancher 420 i plan on getting a new exhaust and i will be putting a silent core in it to add more back pressure will i need to retune it?

@PartzillaParts 6 жыл бұрын

It's possible, but not always. Install it and see how it runs, then you can decide if it needs adjustment.

@wyattmac9701 6 жыл бұрын

Partzilla it's running rich stocks will the exhaust help or make it worst? It was back firing before I added a new air filter and the spark plug was black

@PartzillaParts 6 жыл бұрын

A little popping or backfiring is normal. Typically, if you are running rich, less back pressure would help even it out. If you are adding back pressure to a rich scenario, it will probably need to be tuned.

@wyattmac9701 6 жыл бұрын

Partzilla okay thank you!