Honda Ruckus / Zoomer 50 CVT Installation (belt, sliders, variators, clutch) Mitch's Scooter Stuff

Рет қаралды 59,725

5 жыл бұрын

In this video I show you how to install CVT parts (belt, sliders, variators, clutch) back on Honda Ruckus / Zoomer 50cc scooter.
New parts I replaced:
Drive belt - amzn.to/2Dx83R2
Sliders 6.5g - amzn.to/2PQb6JY
Tools I used:
Ratchet - amzn.to/2RIazHg
extension - amzn.to/2ARFqf2
8mm socket - amzn.to/2D9JLvn
10mm socket - amzn.to/2D8VgTO
14mm socket - amzn.to/2ASUs45
17mm socket - amzn.to/2SUYno7
Clutch holder - amzn.to/2DaMm8F
Torque wrench - amzn.to/2DBCANV
Step 2 and 3 videos:
CVT Removal - • Honda Ruckus / Zoomer ...
CVT Parts Inspection - • Honda Ruckus / Zoomer ...
CVT Installation - • Honda Ruckus / Zoomer ...
Need clutch assembly kit? Grab one here - amzn.to/3NjOk6Y
Honda Ruckus 50 videos: bit.ly/2u8pNhP
SHOP ALL SCOOTER TOOLS AND GEAR I USE: amzn.to/2CbqQku
Want more free Scooter Tip / Tutorial videos - Please support MicBergsma!
Paypal donation: bit.ly/2fghrwN
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact:
hire.micbergsma@gmail.com
*******************************************************
KZfaq - 2nd channel - bit.ly/2g4i5d5
Instagram - bit.ly/2fB8gay
Facebook - bit.ly/2gEsYpt
******************************************************
Austin, Texas
Filmed by Mitch Bergsma
Edited on Final Cut Pro X on Mac
Scooter Intro edit by Erik Lauritzen
Check out his websites: bit.ly/2gQe8d4
#mitchsscooterstuff #hondaruckus #hondazoomer

Пікірлер: 83

@MitchsScooterStuff 5 жыл бұрын

New parts I replaced: Drive belt - amzn.to/2Dx83R2 Sliders 6.5g - amzn.to/2PQb6JY Tools I used: Ratchet - amzn.to/2RIazHg extension - amzn.to/2ARFqf2 8mm socket - amzn.to/2D9JLvn 10mm socket - amzn.to/2D8VgTO 14mm socket - amzn.to/2ASUs45 17mm socket - amzn.to/2SUYno7 Clutch holder - amzn.to/2DaMm8F Torque wrench - amzn.to/2DBCANV

@dilman121 5 жыл бұрын

How do slider weights compare to rollers? Would you say go with 6.5g sliders if you had 7.5g rollers in?

@andrewwawiorka5041 2 жыл бұрын

Do you have a link for a replacement clutch assembly on amazon or know of another online parts store that sells one?

@MitchsScooterStuff 2 жыл бұрын

@@andrewwawiorka5041 Hey Andrew, I just added a new link in description and in amazon store... the brand is NCY

@olejerrild Жыл бұрын

How many miles does one get on a Ruckus drive belt ?

@JFrenchRennier 2 жыл бұрын

Without a doubt Mitch makes the best instructional video's. Detailed without extraneous distractions.

@MitchsScooterStuff 2 жыл бұрын

Hey thank you so much!

@AMotoiS 2 жыл бұрын

Mitch, your videos have given me so much confidence to work on my Ruckus, started to learn from scratch a year ago! No one is putting out this kind of quality like you. Thank you so much.. hope to see more videos on the Ruckus in the future.

@MitchsScooterStuff 2 жыл бұрын

Great to hear! 😄🙌🏼 yes planning to post more ruckus videos 😄👍🏼

@scottkeninitz 4 жыл бұрын

Zen and the art of scooter maintenance.

@1glopz 3 жыл бұрын

No music No funny comments No BS just plain good know how Kudos to Mitch

@DoneilSC 8 ай бұрын

Thanks for making this video! My Ruckus was having an issue with the drive face nut walking out because I overtightenen it after some tuning and caused the threads to strip. Thanks to this video (and some replacement parts), it's properly torqued, and running great now. I couldn't have done it without you! Truly, this helped so much and I am immensely grateful to you, Mitch!

@allans7281 4 жыл бұрын

Just love watching your videos -so easy to follow along . All the information we need; nothing we don’t . Fun to work on our own bike!! You rock!!😎

@slothitwonder1015 5 жыл бұрын

I really want to get a ruckus, this guy is provoking me into getting one lol

@hemperor243 4 жыл бұрын

Nice! I learned a lot from your videos. Your videos kept me awake until 3 in the morning. Keep posting a maintenance and tutorial videos specially for honda ruckus. Great job sir!

@andresr6518 5 жыл бұрын

Thank you Mitch you are helping me tuning my ruckus up with those videos.

@gl4278 3 жыл бұрын

Mitch's Scooter Stuff videos are the best. I've watch almost all of his videos. Very informative and not a waste of time like the other videos I've watched. Thank You, Mitch.

@harryhawk7700 3 жыл бұрын

Great tutorial , have watched a few clips about changing the drive belt from other people , you use the correct tools and made sure that the belt sits properly and doesn't get pinched before you tighten the variator nut with a torque wrench to the correct tension, impact drivers are not a good idea as you can strip the thread.

@andrewgurney6019 3 жыл бұрын

The man yet again, thank you dude, life saver!!

@Andres-vy2sf Жыл бұрын

Thanks so much Mitch. I used to watch your videos before I owned a Honda Ruckus…now I own one. You’re videos are a great help!

@MitchsScooterStuff Жыл бұрын

😄👍🏼🙌🏼

@chrisbloom256 3 жыл бұрын

Best channel for scooter repairs on KZfaq.

@piearm1271 3 жыл бұрын

Brilliant video, always so clearly explained.

@shawnsparks8367 2 жыл бұрын

One of the best tutorials I've seen.

@stevoreno6266 2 жыл бұрын

Mitch answers questions. Im a subscriber. I will be doing some mods soon and this is the place to learn. OUTSTANDING

@MitchsScooterStuff 2 жыл бұрын

😄🙌🏼🙌🏼

@xxxAtpe 4 жыл бұрын

The way you said rotate the pulley until nut is fully sit in well is definitely correct way. As you know some shop mech dont do the way properly , in the end, nut not sit in well and pulley come out and spoil the threading have to replace new crankshaft.

@ruckinehround6965 3 жыл бұрын

Awesome video. You really do a great job.....

@michaelmanalo5065 4 жыл бұрын

good stuff, great tutorial video.

@christinesmith7625 5 жыл бұрын

mitch you are the bomb

@austinbigge9626 4 жыл бұрын

Id love to see a video showing how to replace a broken kickstarter spring.

@snvlt68 2 жыл бұрын

Always the best! Thanks

@MitchsScooterStuff 2 жыл бұрын

😁🙌🏼

@my50bike 2 ай бұрын

Great video Bud - To the point and easy to understand with some great tips (don't pinch the belt :-) ) Thank you.

@jamesconway337 2 жыл бұрын

You are a genius!!

@thomsenfly 5 жыл бұрын

Mitch, really enjoy your videos. They are clear and precise. I want to change out my drive belt on my Ruckus. You had a scanner wrench that helped you hold to the clutch housing and the variator from spinning. Where can i get one of those. It would help a lot with the installation. Thanks again.

@MitchsScooterStuff 5 жыл бұрын

Thank you! I have list of tools in description, click on link that's where you can get

@robertpresti4366 5 жыл бұрын

Mitch, On a 2009 Yamaha Vino 125 scooter do I first have to drain the engine oil to remove the drive belt and clutch pulley cover? because the oil sight glass is there.

@fctryoffetsh39 5 жыл бұрын

Good vid

@keepchrist 5 жыл бұрын

With Mitch's tutorial Ruckus videos even a stoner like me can do these mods & save hundreds of dollars so thanks Mitch, 4:20 brother!

@MitchsScooterStuff 5 жыл бұрын

Haha thanks man!

@ruckusisland5877 2 жыл бұрын

Hi Mitch thanks for all your videos. I been messing around with sliders in original variator and they got flat spots. Also now there is chatter from kickstarter rubbing on kickstarter washer.. it's starting to wear the teeth down. I've taken it apart and put rollers back in and tried to be extra certain of everything but still chattering?? If I bump the kickstarter arm with my heel while riding it goes away for a second but then returns. I don't know what to do. Any advice? Thanks again.

@snvlt68 3 жыл бұрын

Top notch! Thanks

@MitchsScooterStuff 3 жыл бұрын

🙌🏼🙌🏼

@allans7281 3 жыл бұрын

Hi Mitch big fan! How do you ensure that the nut is properly tensioned on the crankshaft for the variator since the belt can get in the way.

@Peter-wy2wl 3 жыл бұрын

Thank you so much 😊 You have a great day. I love 💕 Hawaii. Mahalo.~~~

@askantik Жыл бұрын

Mitch, thanks for this awesome video. I am about to do this on my 07 Reflex. I assume the process will be (fairly) similar. It looks like one of the nuts in your video had some blue threadlocker on it. Do you recommend using threadlocker?

@Cinci746 4 жыл бұрын

Thank you sir!!

@58heriberto Жыл бұрын

Hello can you please help me? I stripped the screw that holds the band. The one where you last put the nut. Do you have a video on how to replace it?

@OneBodyFishing 3 жыл бұрын

Question: I have a 2003 Honda Metropolitan CHF50P, which is restricted to the 25mph speed. Is it true, one can remove a washer from the CVT to increase the speed comparable to the CHF50?

@stevencourtney1965 3 жыл бұрын

Hi, I noticed there is no screw/nut on the front of the clutch, so I want to change the shoes/pads, whats the trick or vid to watch, thanks

@jgibson6041 Жыл бұрын

What tool would help take clutch apart to change clutch pads?

@gmubl 3 ай бұрын

Hi. I have a Honda Dio AF68 from Japan. In the crankcase it looks very similar to yours. But currently I'm facing the issue that the spline on the engine crankshaft (the left one) is worn and the outer drive face as well as the kick starter ratchet don't lock in place. They now rotate freely and the bike doesn't drive anymore. Do you have any suggestions? Do I have to replace the entire crankshaft because of that worn? Thanks a lot

@chiaselotti 4 жыл бұрын

how do you know what size wieghts to use.. im about 200-210 pounds

@rufinodeleon2239 4 ай бұрын

Hello Mitch, I recently ordered a clutch kit from Amazon for a 05 Honda Metropolitan 50 cc scooter and found the clutch pully does not fit. In comparison to the stock clutch, the new clutch has a lip on the back which rubs on the transmission case. In reviewing your video, I noticed the clutch you installed does not have a lip on the back of the driven pully. I've searched online and cant seem to find the clutch you installed which seems to mirror mine. Can you point me in the right direction please? I did review the clutch kit on the amazon link you posted but that also seems to have a lip on the back of the driven pully and worry it would not work.

@allans7281 4 жыл бұрын

Hi Mitch great video question I have a kymco people 150 I’m doing my belt -do you have to put grease on the rollers

@MitchsScooterStuff 4 жыл бұрын

allan Shuben thanks! No grease

@howardfine2209 2 жыл бұрын

thanks!

@user-nh9bg2xi5n 5 жыл бұрын

Nice

@williamquinn71 2 жыл бұрын

Hey man I just subscribed to your channel and I noticed you work on a lot of Honda elite 50s I have an old 88 that I replaced the belt on and now it's either acting like it's choking out or dragging I'm not sure because I've never had a scooter before and how do I adjust and clean the carburetor on this two-stroke

@MitchsScooterStuff 2 жыл бұрын

Hey welcome to my channel! When you installed the new belt, did you carefully install the variator with rollers or sliders in without having them falling out of position? Are rollers / sliders in good shape?

@GodChosenWarrior7347 5 жыл бұрын

Ok, Mitch So I see what I was doing wrong, thank you. I tell you Mitch, if it was not for your instructional training videos. I would have thrown in the towel along time ago. Oh long should a new belt last, with normal residential driving ? Thanks Again My Friend Greg Whitacre Alaska

@emulmulyadi 9 ай бұрын

saya dari indonesia, saya melihat konten bapa ini sangat bermanfaat, terimakasih tutorialnya

@rejexcollects2088 4 жыл бұрын

My variator bolt unscrewed it self twice.i feel like I'm doing everything right.any suggestions.maybe loctite on the variator bolt

@jesselees4370 4 жыл бұрын

Try tightening the nut with a impact drill.

@brokejaw 4 жыл бұрын

Does the spacer not need any grease? It looks like there was some dried up grease from factory installation (dark red stuff).

@SiegePerilousEsauMaltomite 3 жыл бұрын

Oil and belt dust most likely. There’s a oil seal around that shaft and it sometimes leaks a bit, I just replaced an old one that was leaking badly

@EvandroLima6 2 жыл бұрын

surface cleaning and no lubrication on the shafts??

@williamquinn71 2 жыл бұрын

And where did you get that tool you're using to lock the variator and starter up with to take the bolts off and where did you get it

@MitchsScooterStuff 2 жыл бұрын

Link in description :)

@andrewdobin 3 жыл бұрын

Is this ASMR or ruck tutorial?..... killing it on both

@732466 2 жыл бұрын

I have just put a new fan plate front plate on my variator tighten it down but found a small amount of looseness on the spline is this due to wear on the shaft

@MitchsScooterStuff 2 жыл бұрын

Oh man be careful, I had to pull the engine out on another ruckus to replace the crankshaft with damaged splines 😮

@732466 2 жыл бұрын

@@MitchsScooterStuff with the fan plate being made of aluminium as they heat up with friction they should tighten on the spline now I think about it . I must say I find variator,s a hole new world . Many thanks

@bambiAndSteve Жыл бұрын

The area inside the cover of my ruckus is filthy. Is it safe to use parts cleaner to clean it up or is that too harsh? Thanks!!

@MitchsScooterStuff Жыл бұрын

I would do air compressor with blow gun but brake part cleaner would be okay

@user-nh9bg2xi5n 5 жыл бұрын

Long time. No see you

@Lizpolygigiblissgirl 11 ай бұрын

Hell yeah

@83Goldy Жыл бұрын

Hi. What size is the torque wrench? 3/8 - 1/2 - 3/4? Thank you for everything 🎉

@MitchsScooterStuff Жыл бұрын

Hey I have 1/2 but 3/8 will work perfect for this scooter

@83Goldy Жыл бұрын

@@MitchsScooterStuff Ok. Thank you. I already bought the 1/2 and it’s fine. 🤙🏼

@kelpate8917 Жыл бұрын

Dang Mitch, F’n Amazon. I try to hook on from your site so u get credit ( I hope). I dont see the 6.5 slidders. Im just letting u know. Ill find em thx to you. Id be all messed up w/o you. I dont have pay pall. They be robbing folks in prison/Jail anyway. I got cash app tho. Dude i hope u get compensated for ur kick ass videos.