maaan below 900 and making 8.65 et, that is super efficient car. love results, keep us updated.

That’s proof the 4.6 2 valve can with stand over 700hp with mods !! That’s impressive

Amazing job and build buddy keep up the good work and I look forward to seeing your next video

Hell yea man! Great numbers!!! Definitely one of my top 2v’s

Holly hell Andrew those are really good numbers! Thats awesome man!

That 2V is makin some power 💪😤brutha,nice job!!

Like I said before brother "It's such a joy to see your 2V running so well". Keep up the hard work!!! That waste gate may need some attention, race car problems they never stop. Love your car brother. By the way I used to be station at Fort Campbell from 1995-2001. I sure do miss the fishing there.

thats awesome.. and no trailer required!

Damn, you must have that thing built to the hilt. Those are HUGE numbers for a 2 valve. Badass job.... FORD POWER baby!

Another awesome video as usual! Love what you've done with that car, I would like to do that to my Stang! LOL

Great video...man that Corvette is nuts!!

754HP and 595 TQ. Impressive.

Omg! Bro I got chill bumps! She's singing GREAT

“Playing around in Mexico on the way home.” Hahaha

Badass video! You and Sergio’s cars seem like a good match

“I’m bad at math”😂😂that part sent me

Great video and power Andrew, I love it! I thought at the beginning you might have to melt down the big guy and pour him into the passenger seat... ;)

"Boost weather" Love it. Now in Australia if we drove that car on the roads we'd be jailed for life. You guys are so lucky.

That's quite a detour to run down to Mexico on the way back. 🤣

damn bud, love your channel. have a similar mustang just pushrod stuff. sold my vortech and went on3 to see if i can get my 331 stock lock sn95 into the 9s. went mid 10s a few times with good mph but still rowing gears so my swap to a glide this winter. keep up the videos.

I bet your neighbors love you lol👊🤘2valves ftw💯

Man those Ford mod motors sound good. I was enjoying all the Chevy's on the Dyno before, but the Ford coming on after was much more musical by comparison.

That stingray was gonna jump off the chassis.

Sergios Z car is super nice! Seen him many times at clarksville speedway!

Awesome numbers man!!, I bet with that 3#'s you were missing you would have been real close to 900. Can't wait to see what the difference will be with some trick flow heads. Keep up the good work!

I know this is an older video, but very impressive buddy! I hope you got that wastegate problem figured out

Man I have a 99 150 I have had since I was 18 she is my first truck and vehicle she has the 4.6 but I was thinking of swapping lightning motor but I didn't know a 2v can make that power I just want 500 hp a nice cruiser ur my favorite channel I'm learning alot thanks for the great videos

Nice video!

Who ever makes those blower cams I need one wow!!! Love the sound they all almost sound identical

You’ve got the cleanest engine bay I’ve ever seen in a newedge. How’d you do it? And which engine controller you using ? That screen looks pretty badass

some impressive numbers

That turbo sounds so good

Wow, I'm impressed. Need to get mine on the dyno, but I'm only making 350 if I'm lucky.

Wow that is sweet!

I like how the 2 v sounds

Very impressive.

Awesome job on 4.6 2 valve. Question do you use a aftermarket damper or underdrive pulley? If so do yo recommend ATI,Trick FLOW or do you recommend a piggyback style?

much love for the 2V.

I love it!!!!

Subscribed , just because the 2v

Woa Brutal

😂😂😂😂wonder what the neighbors are thinking right about now lmfao

Ive noticed sum of the comments and post wher people are thinking that's a stock gt 2 valve ! But in the videos of building it , it's clearly stated to be all alluminum block and if u look at the waffle castings in the intake valley ,u will see that it's a teksid block from either the mark 8 lincoln or 1996- 1998 mustang cobra ! A stock gt from 1996 to 2004 would blow its wad after it reached 500 hp ! Maybe not rite away but soon enuff ! Exspecaily without forged internals! And a extremely balanced rotating assembly! His motor would make even more power if it had 4 valve heads but I'm very impressed with the 2 valve and him keeping 2 valves on the map! His block can handle 1000 hp or more !

Yo !! Love the build, informational a plus . My question to ,what ATI damper you went with on your application? Well I cannot figure out for the life of me, so if you don't mind I have a 4.62v 400rwhp

That's funny watching my big ass climb into your car 😂😂

Good old Clarksville Tennessee?? I lived there from 2013-2016 . I was not liked by the MP’s for racing in front of gate4 in my 2009 N/A -ZR1 “” Nitrous assisted”” 😂

Low boost, medium boost and high boost numbers it looks like. That kill tune is strong 🤞

Awesome

Nice numbers! I have to figure out my next build. Everyone is making big power. I had my car dynoed last week. 320 hp & 332 tq with a factory ford 302, 11R 190 heads, Ed Curtis cam, Holley SM2, stock AOD and converter.

great work ¡¡

My s475 combo needs 2 wastegates.i run 2 45mm gates.tho ive been told u could get by with 1 60mm if placed right

Dope car

\m/ beast mode....engage \m/

gives me hope for my newly-acquired 95 t-bird lol

I have a 99 gt- what you have done are goals I have a throttle body Off-road h pipe with custom mufflers Intake Long tube headers Cams (don’t know size but biggest I could put in) 3.73 gear Tuned On pump gas puts about 300 to wheels

I was gonna say check the diaphragm. Looks like a good day !

Like that Mustang but that Datsun z stole the show bro🤔

Nice 2v

Nice power !! What transmission & torque converter? What turbo do you have ??

Nice work. Is the blow by much of a problem if it's on decel?

I think I've seen that Datsun run 5s in the 660 in Clarksville TN? If y'all are close I'd love to see your 2V run there

Makes me want to 4.6 my fairmont now.

Dang 846hp 🥰🥰🥰

On the fab table is a USMC combat engineer castle.

Damn that thing is nasty. That oil smoke on the let off though 😖

Not bad for a 2v Run bigger intake piping. Get a lil more volume in there. Boost will drop a couple Lbs too. Waste gates are probably a lil too small for the turbo. But bad ass car.

Fill in anything extra that needs to be done for the install like does the damper require timing thanks

Wow!!!!

Hey Andrew, long time fan and supporter. I’ve decided to ditch the D1 and go with an on3 on my Bullitt 2v. I’m curious though, do you know if a borg Warner would fit? If so do you recommend a specific size? Looking for max 500hp on a built short block, daily driver.

That Stingray sounded like a machine.

Wow I just found this I didn't know you could do that with a 2v I been wondering how to go about making it turbo without blowing it to pieces idk if I could pull off a build like this

Where can I get a cast intake manifold for my 2valve man please let me know

Your neighbors must hate you 😂🤣

bought a truck.... the stang is put up time for my mmr motor also what did you do with your old turbo?

Don't have a dino around where I live but running 6.0 with a 96 push rod motor at 115mph wondering what the HP is.

I’m subscribed to your build would like to get in touch with you about building my 2v similar to yours !!! Awesome build you have buddy

So what was the last pull ? 754 hp and 595 torque ??

Great video. So what's in that yellow Corvette? Big block? Also, what's the significance of speeding around in Mexico? No highway patrol? No speed limits?

That yellow vette need to go race the dam hunicorn 🤣🤣🤣🤣🤣🤣🤣

What kinda turbo n what else is done?

the orange car @14:30 is a 2002'ish infinity G35 (nissan skyline)

hey man i have family in paris and was wondering if titan motorsports would be a good place to get my 3v cammed mustang tuned are do they do alot of mustangs

What is the orange car and what engine is in it?

Damn what set up You running ?

Are you still in the clarksville area?

Who is owner of G35, and what intake manifold is that?

Ive got a 4.6 2v what would help me the most???

14:04 When u do a burnout on the dyno u know it's well above 1k 🐎

hey had to ask man how long did it take and how hard was it to do the tubular k member install

Great numbers . What fuel and how much boost was that on ?

Support Vehicle is mandatory for Nissan

What kind of dash is that sir?

You have A turbo 400 so just change your ultrabell and go with a set up like yellow vette

What car was at the 15 min mark

I have a 2000 2v fully built motor/trans with a single 80 and made 840 to the wheels on 18 psi I’m swapping the turbo and plan to shoot for around 22 lbs looking to clear around 950rw on a street 2 valve.

My brother has a f150 with a 4.6 headers roush intake throttle spacer intake roush cat back exhaust and an edge programmer and runs like shit what can we do to improve performance

What size cowl hood?

I doubt you will see this but maybe someone can help I’m looking for a dyno shop in middle tn any suggestions

Which trick flow heads did you use

Supporting the locals would be cool ask would they like to sponsor you