A video 5 years old yet the quality is brilliant thanks for the video

Nice vid mate, always like a bit of maintenance being shown and explained clearly. nice idea with the card bolt reminder (i'll borrow that).

The card board trick is genius someone hand this guy his MBE 👍🏻

this vid really helped me out. nice idea with the diagram btw. greetings from germany

Gotta say thx man, just did this on my bike. Nice video.

Cracking Video mate keep them coming

Great video brother!! Keep up the great work...

What an awesome video! Congratulations! Very nice indeed!

She’s a pretty one! Great stuff, keep up the great work. Thank you.

Thanks for sharing a very nice job and description.

Thanks man! You have helped another biker! Peace

I know its "by the book" but I just unhooked the chain from the rear sprocket and pulled the rear wheel out, saved lots of time, I had a puncture and had never removed it before :)

nice video..... clean and easy to understand

Awesome video I'm going to change my chain and sproket on my 09 gsxr 750 keeping stock gearing also.

Sweet work !

Great video, I used your specifications to change my k7 750 chain this weekend and it worked a treat 👍🏻 thanks, Pete

Thank you for the video!

Informative Video. keep sharing

great video good job :D

nice video. cheers mate

NICE job.... thanks....

Thanks. I subbed.

Hvala ti dobar video

i love your videos for the 06 gsxr 600! helped out alot! i dont know about the spark plugs though, i think the screws for the airbox that connect to the throttle body isn't philips but are hex. are the bolts different? im from canada. i'll have a look at them another time

Looks simple enough

Good job 👍 I

Hi, not really spent a lot of time ripping and stripping my K6 600 down yet, but had a low speed off in the wet and want to remove rear swing arm to repaint it and fit a new hugger as the bolts have snapped off in the Ali so need drilling / warming up to get out, do I need to split the chain in order to remove the swing arm so that I have the arm on its own ready for bath in paint stripper ? I have got the Castle socket and large Allen key to do the deed but not yet started, (currently researching) also what do you recommend to hold rear end of bike up as swing arm will be gone ? I'm thinking if building 2 wooden A frames from 2 x 4 and fit another bit of 4 x 4 along top full width of garage so I can work around the bike in the middle and simply rope around rear foot pegs and lift it a few inches, front I have a paddock stand so should be ok, good video nice to see a proper job. Used to working on cars where getting it off the ground is a bit easier cheers

Great vid very informative.

Thanks

Subscribed. nice and hd quality explained :)

Good job thanks for great video helped in install!!

Cant wait to change my chain and sprocket Next week💯what grease should i use when i put the master link in?

nice protection pads, do you have a link to buy them too :)

is that company you got that chain from pretty reliable i use vortex good job btw.

May never get an answer but should you grease before putting new front sprocket on?

Hi where can I get the correct tool to connect the chain I have gsxr 600 08 and need that tension tool ?! I don’t trust other tools I see in eBay and Amazon and also the kit ?

After putting the sprocket cover back on my clutch had 0 play. Any idea how I could fix this?

nice jop

Should lube axle before u reinstall

Right side spacer has a lip, and left side doesn't, so be difficult to get them mixed up.

What does having a buddy on the rear brake do? Ive mistakenly cut the chain and removed the rear wheel prior to undoing any of the front sprocket and now that first allen key'd bolt in the front sprocket is just so damn tight and I cant get it loose! any advice?

- When you change sprocket to you have to mess with the gearing or it’s ready to ride.?

What chain is this? as my 600 k2 im getting anywhere between 19-20mm width? but im measuring outside of the plates, not sure why you measure the pins at the will be shorter onces mushroomed?

is it the same for k9?

How fare is that clutch cable bolt supposed to be

Rear axle nut torque spec please??

how meany links did you'd up using ?

what tire size are u using??

What type of lube and what Loctite

Is that 32mm socket with 3/4" drive to break that nut lose? Where did you buy the socket?

do i have to open the chain , if i just wanna change the front sprocket and rear sprockets?

Could you help me out. I changed oil filter and plugs on my Gsxr K6 1000cc, I realised just after I started I might of put bit small bit too much oil maybe 1 extra quart. Drained this out but the bike isn't idling now sinc the service, and it's really smokey. All lights on no codes. Any idea what is wrong, is the oil gone too far in the engine, I did replace iridium spark plugs for normal plugs. Can anyone help me out??

You forgot to mention the small sprocket socket.. its s 32mm by the way yall. Ran 3 times to the store to get it 😂

Don't use WD 40 I did it wrecked the seals on the chain just a little warning.

That chain looked WAY to tight.

I pulled off the housing case, and realized I dont have a socket to pull the front sprocket nut off. What size it is? i have to go buy one.

How is that chain 30mm? that's barely 10, very tight, loosen the chain a bit

Not gonna flare the chain pins?!?!?

Axl is 32mm ou 34mm

You put the grease on the wrong part of the master link :0

damn talk about by the book, so much u can skip to do this . I'm a motorcycle mechanic and time is money but nice video

You gave your chain slack not tension.

Chain should be adjusted while off the paddock stand

The only thing with this video that is just downright wrong is the Cush Drive Bushings. if you can remove the sprocket and bearing carrier off of the wheel easily like that then your cush drive bushings are WORN. dont be like me and ride with worn cush drive bushings, you will need a new brake rotor and rear brake stay over time. and it will also MURDER your wheel bearings.