Great video, you showed the tricky parts, and it was very informative. I had already ordered a two pack because it was cheaper, on amazon, then I found your video. Turns out one was gen 1 which had stopped holding a charge, and the other gen2. I simply cut the connector off, spliced it and was able to use both batteries, and they are working great. gen 1 was a pita as you show in the video, gen 2 couldn't have been easier, and it took all of 15 seconds to replace. Thanks again, great job on the video and for the helpful info.

Ok, you are skilled. made it seem easy. Batteries arrived a couple of o hours ago, so ill go operate right now. I remember previous consoles controllers were a Royal Pain to bring apart, those triggers were like aligning micro sized rubiks cubes. Thanks for vid.

Thanks for explaining that little plastic "reset" button nub that fell out on my controller

VERY DETAILED video. PERFECT! You pointed out all the things everyone else missed. You just earned a like and a sub. THANK YOU!

Challenging and informative worth watching🥤🤔🍿👀

Geez, what'd ya do to that ribbon?! That looks violent.

I just replaced the 1000mah battery with the 2000mah battery and the 2000mah battery is even worse. Smh. Its not even lasting up to 3 hours.

Thak you for sharing

I did not know what to buy so I got Pro battery then had to change the connector I did not understand why the cable needed to change but I bought 5 ports to charge as I was paying for shipping I should have got larger capacity battery

Bought a replacement battery with the right model, but I'm either having two problems: 1. The battery is defective 2. The controller itself will no longer charge any batteries

Linked page is gone. I was going to buy that battery.

Soooo, how essential are those little springs? I just replaced my battery and those were being a pain….so I kind of left them out…😅 things seems to work still?

Hey so I have the same tool set as you but different battery I have a 2000mh one with 2 connectors it’s compatible with chu 1 and chu 2 I’m using it for a pro controller. So I ended up breaking the led plastic thing. Only place I can order a replacement part is “eBay For PS4 Pro 5.0 Slim 4.0 Game Controller Housing Transparent Light Sheet Cover “ if you type that in eBay or google it’s that part, I can’t find any place else that sales it. Or a video how to install it. I’m upset I had that controller from 2016 when I bought my pro. So I don’t want it to go to waste I put it back together it works fine but I want to replace that part so it looks like new vs some loose plastic. Here are some Other key words to look it up. “PS4 Pro Controller Housing Transparent Light Sheet Game Handle Light Cover”

Do you have a video that shows me how to replace the large connector on the new battery with a small one that fits? Thanks

It's been a year since you posted this video.how long are you getting on a charge? How is the battery performing now?

My controller won't turn on and I assume it's just the battery that needs to be replaced but my question is is the ribbon in any way the reason why my controller won't turn on?

I bought another ds4 controller but it's not original. although it works perfectly fine like the original controller except for the battery where it only last 2 hours. question, is it okay if I replace the battery into this PKCELL battery? and if it's okay, can I put adhesive tape (back to back tape) so the new battery would stick to the carrier? I really appreciate your response.

does it affect charging speed?

I can’t put the little white piece in

Does it show the battery life bar on the screen? and, can I charge it normally?

Thanks for the help but it was a waste for me. The batteries dont even fit. The battery plate are built different.

new drinking game. Drink every time he says "actual".

Hey man im a total noob with these stuffs, I just want to remove the dead battery on my controller, will it work if i just plug it using the usb cable? I have no plans on replacing the battery btw, and do i need to do some electrician stuffs to safely remove the battery and make it work? Or do i just unplug the battery and its done?

Broke my only controller (not the person who made the video's fault). Sony, who do you think you are charging so much for a controller and then putting such a crappy battery in them that the user has to replace them using 3rd-party hardware.

What charger would you recommend for this battery I just upgraded to this battery and using a Power A single dock charge station , is that Power A good enough or can I use my Samsung quick charger on it?

Can I swsp the smaller end from the original battery to the 2000mAh battery which has the larger connector?

Any link for that front shell? Cheers

can i use a faceplate from a cuhzct2 on a ct1

Does anyone have a link for the v2 ds4 battery?

God these batteries are bad, left my ps4 remote sitting for 2 years and it’s buggered unlike the ps3 remotes that just work perfectly

I've replaced mine and it still doesn't charge. Any ideas?

i have a rather unique problem and no one has posted MY SPECIFIC problem on any forums that i can find. the controller that came with my fatty PS4 battery is worn to the point that the it only lasts about an hour, but every NEW controller I purchase has insane stickdrift, to the point that some games are unplayable this happens with EVERY new controller and no amount of "resetting" or "recalibrating" or "zero-ing" fixes the problem. what do i do?

how can I fix my ps4 gen 2 controller,it does not charge or turn on and light does not show on the bar.

What was wrong with the other battery? Was it worse than the factory one or worked the same? Because I ordered one of those you replaced and I’m looking everywhere and it’s supposedly fake i guess you can say and now I’m thinking if it will work or not, please anyone reply I want an answer

My battery tray will not stay in someone help pleaseee

Where can you get new triggers/springs?

Is this for a second generation controller

I never have to charge my controllers more than once a day just dim your light

The focus on the small parts was ridiculously awful