HOW TO CLEAN FUEL INJECTORS WITH A PULSE TESTER AVAILABLE ON AMAZON (see link below)

Рет қаралды 13,985

Жыл бұрын

In this video, I demonstrate how to clean and test your vehicle's fuel injectors using a pulse unit I picked up on Amazon. The full process and the test results are here for you to see. Please let me know what you think in the comments. Thanks for watching!
TOOL USED: ALLOSUN PULSE INJECTOR TESTER AMAZON.COM
www.amazon.com/ALLOSUN-EM276S...
Please Subscribe to my channel. Thanks !!
If you like my content and would like to help support my channel, please buy me a coffee. Thanks! Here's the link: www.buymeacoffee.com/greatpro...
I fix my own cars, renovate houses, tinker with almost everything, cut my own firewood, take short trips into the wilderness, dabble in computers, drag innumerable objects, vehicles and other things home to dismantle, discover and repair, and then I share the adventures and tips with my viewers here on KZfaq. Join Me!
Disclaimer: IMPORTANT! READ!: This video may portray household, construction, automotive or other repair methods and/or activities that may not be suitable for everyone. These videos are informative but are for entertainment purposes only.
Always use certified contractors, licensed mechanics, qualified electricians and professionally certified tradespeople to perform any work. Follow the advice of your local building inspector and get appropriate permits before undertaking any repairs or electrical work.
Please follow all safety precautions and local Codes. Viewers are advised not to undertake any of the actions in these videos themselves. Everyday Projects cannot be held responsible for any damage, injury or claim resulting from information or instruction gleaned from these videos, whether expressed or implied.
Music Credits: KZfaq Music Library
Image credits: Google images

Пікірлер: 38

@jamesviehmann4291 7 ай бұрын

I bought this same kit on sale for $35 American off of Amazon about a month ago.. I needed to clean a set of Bosch 784 injectors to convert the from the Siemens/Deca single hole injectors on my 99 jeep TJ with 4.0 engine to the Bosch 4 hole. Here was my experience with the kit... The first thing I did after looking at the pigtail that was "supposed" to hook up to the injector (Yeah right!) was to go to my local pick a part and grab an EV6 and EV1 connector with a few inches of wire attached. I added 2 flat spade terminals on the end so that I could plug into the spades on the tester and do several different style injectors... Next, at first I had the same issues that you had with the injector shooting out and poor sealing to the can. I quickly realized that there is a sequence to making this work. Once you have your tester and injector hooked up and it set to the mode you want, you want to hold the injector in place by positioning it between your pointer and middle finger as you wrap your hand around the white applicator. Your thumb will at the top of the applicator in this position. Push the applicator straight down on top of the can of carb cleaner (I used Gunk brand and it was a perfect fit!) You will hear and feel it engage and pressurize the applicator as you continue to hold it pressed down on the can.. "You should here no noise and no cleaner should shoot out at this point. Now with it under pressure, look at the tip of the injector, if it is dripping it has a leaking pintel.. If no leaks.. Hit the start button on the tester and the injector will start to spray. I recommend mode #4 as it is a continuous spray pulse and will clean the injectors quickly without damage to the injector. This thing for the money was worth it for me... I've cleaned at least 30 injectors with this thing and its still going strong! Sorry for the long post but, hope this helps someone out there..👍

@EverydayProjects 7 ай бұрын

Nice review and instructions for someone who tries this pulse tester. Always good to have other perspectives and opinions. Thanks for posting!

@jawadsh787 3 ай бұрын

In my view, there are all sorts of different types of injectors in cars, so it’ll be hard to make a machine that perfectly fits all, considering it’s a 40 bucks cleaner, so even if you have to do some adjustments, this cleaner works.

@OG_PC-Wizzard240hz 8 ай бұрын

I just bought this last night for my fuel injectors for my 98 mustang. They have never been cleaned over 20 years. So this a must for me right now. Plus I’m doing a whole engine job. Putting everything back together today.

@EverydayProjects 4 ай бұрын

I hope it goes well! Take Care. have you Subscribed to my channel? It's FREE Thanks

@OG_PC-Wizzard240hz 4 ай бұрын

car is up and running months ago and i wanted to say thank you lol@@EverydayProjects

@GardenTractorBoy Жыл бұрын

This was interesting and not something we have tried to do before. I guess it at least enabled you to clean them and this was great information, thanks

@EverydayProjects Жыл бұрын

This tester/cleaner wasn't perfect but it got the job done for a reasonable price. It did, however, necessitate the use of some words that I don't usually include in my KZfaq vocabulary. But what the heck: I pull out all the stops to educate and entertain haha

@Aesthetics622 2 ай бұрын

I think you where just not keeping the hole inline well sealed with pressure and not blanaced because i had zero issues with leaks on the can adapter plug.

@EverydayProjects 2 ай бұрын

I depends on the can. What brand and type of cleaner were you using?

@Iseerightthruyou 9 ай бұрын

If you select mode 4, it is a continuous pulse, and you dont get the leaking like you're getting. Its not the device it is the user. Operator error..lol

@EverydayProjects 5 ай бұрын

Thanks Donald!

@gregsmith2262 2 ай бұрын

I would connect a hose and container and gravity feed a mix of petrol/diesel and injector cleaner. Or cobble together a pressurized container and tube feed.

@EverydayProjects 2 ай бұрын

Very good ideas! I may try that next time. Thanks for your comment.

@wellnessotr 5 ай бұрын

I bought this, going to try it next week.

@EverydayProjects 5 ай бұрын

Best wishes. They can be finicky but they work 😀

@OpenAirOutdoors Жыл бұрын

A little "gadgetry" for $40 but it did ultimately do the job! Thanks for showing Craig✌️

@EverydayProjects Жыл бұрын

It worked, so not too bad. Take care

@GrampiesWorkshop Жыл бұрын

How's she goin'? This is a neat idea for testing injectors but I think it might need more work. I like how you stated it, "In a pinch this will do the job." Nice demo and a good review of the unit!! Take care!!!

@EverydayProjects Жыл бұрын

The weak link is the connection to the can. It would be better if the seller recommended or provided a can of solvent. Luckily, cleaning injectors this way isn't performed very often especially when "pour-in" products are available. I use LUCAS fuel injector cleaner and usually don't have any issues with stumbling or rough idle. This car sat for a few years so I thought to give it a better treatment. Summer is here...Enjoy! (we are waiting for another of your firepit videos).

@GrampiesWorkshop Жыл бұрын

@@EverydayProjects It's been on the dry side here and the Dept of Lands and Forests post daily if we can have an open fire or not. And most days it's 'Not'!!!

@tuoithoquenghich655 Жыл бұрын

Hello my friend, very happy to see the video you share, you and I have the same job, let's do this job well together, wish your family health and success.

@EverydayProjects Жыл бұрын

Thank you for watching and commenting. I hope the information in my video was helpful. Best Wishes!

@thunderchild321 Жыл бұрын

It doesn't leak on autozone carb cleaner & jes tapping de positive terminal works..jes saying

@EverydayProjects Жыл бұрын

I'll look for that product, thank you.

@Paios Жыл бұрын

Do you think this will work with an older barb style top fed bosch injector?

@EverydayProjects Жыл бұрын

No idea. These testers seem to work on a wide range of injectors. Maybe give it a try. they are not very expensive.

@OG_PC-Wizzard240hz 8 ай бұрын

Is it safe with a car battery. I’ve seen 9v battery’s just not a car battery hooked up to it…

@EverydayProjects 6 ай бұрын

It runs on 12 volts DC and a car battery is what they recommend using, in fact, it arrives with battery clamps. Good luck! Let me know if I can be of assistance.

@dereksdiatribe 7 ай бұрын

Didn't it come with two adapters? Both with different hole sizes?

@EverydayProjects 7 ай бұрын

Yes it did with two different size can adapters and neither of them fit a regular can of injector cleaner (or any other solvent I hooked to it). Maybe there's a can that fits and minimizes leaks but I haven't found it. Thanks for commenting Derek. Have you thought of subscribing ? It's FREE

@user-zw8du4qt2r 2 ай бұрын

It does come with 4 different adapters It work fine for me. It’s only $30.

@tajmeeltarfeeh7030 11 ай бұрын

I tried cleaning without the Machien

@EverydayProjects 11 ай бұрын

How did it work?

@tajmeeltarfeeh7030 11 ай бұрын

@@EverydayProjects I have add it a rubber tube, with the carbon cleaner spray firm connected, then spray while connecting to a 12 v battery with switch also will be easy to press rather than keep spraying

@EverydayProjects 11 ай бұрын

@@tajmeeltarfeeh7030 Sounds good. That will work. Best wishes!