How to fix a Nissan qashqai system fault - exhaust pressure sensor replacement

Рет қаралды 75,733

Sol does stuff - "How to guide"

Жыл бұрын

Пікірлер: 21

@stdavidboy 2 ай бұрын

You can use a bicycle cable on a drill, it takes a bit of time but it can be done and then clear the faults. Job done!

@tmautosstaustellcornwall5882 Жыл бұрын

Well done for giving a go - it’s a very common problem for the rubber pipe to split near the pressure sensor - a car I was working on this had it happen. I cleaned the tip of the pressure sensor and just replaced the rubber pipe - you can take the pressure sensor off and start the car up - and if the pipe is NOT blocked it will blow out Smokey exhaust gasses rev it abit to be sure it’s free of soot . I agree if your not confident take to a good mechanic

@arfurdaley6399 10 ай бұрын

I had this symbol come up but it went away after 5 mins of driving. In my user manual however it says it’s either front radar obstructed or issue with lane departure warning, traffic sign recognition or toward emergency braking system ? The latter all related to front radar ??

@johnwba0303 Ай бұрын

Do you have any info reference to stop start system fault battery seems ok and alternator is kicking out 14.7 v so charging ok

@rogerlongfellow54 2 ай бұрын

Misleading terminology, its the turbo upstream pressure sensor. The differential pressure sensor for the DPF is not visible and is behind the engine connected to 2 rubber pipes

@danmead69 Жыл бұрын

Hi there I have a 2016 qashqai and I tried this. Cleared the tube, smoke blew out and air was coming through again but the warning lights still showing after I put the sensor back on.. any ideas? Really haven’t got the money to take to a garage to pay for it 😅 thanks in advance!

@soldoesstuff-howtoguide8430 Жыл бұрын

Hello, I think you still have to clear the fault. You can Buy cheap fault indicators on amazon. Sounds like you fixed it though.

@exxel01234 Жыл бұрын

You could of used a bike brake cable it would of gone around the bends ? As other people have used ? It’s such a shame people who design these engines obviously don’t work on them 😂 good video by the way 👍

@soldoesstuff-howtoguide8430 Жыл бұрын

Thank-you. I tried a bike cable at first but it was too thin to push round the bend after 10cm or so. A clutch cable was but as per the video I shaped it. It does work you just have to be careful.

@MyJeanf Жыл бұрын

Great video. I had a system fault which was causing the engine revs to become erratic while driving also causing the car to jerk when accelerating. Just wanted to ask is this what you experienced . Thanks again for the video JF

@soldoesstuff-howtoguide8430 Жыл бұрын

It's not I'm afraid. I just had a warning light and that's it

@user-vn1gv8wg9z 11 ай бұрын

what qashqai do you have (year&engine)? did you ever got this sorted out? having the same issue on a 1.2, tried diffrent things without success.

@stephenrodway8357 8 ай бұрын

I've just had the same problem, Do you have any idea what caused it?

@bukolaalliowe9164 7 ай бұрын

Did you ever find a solution to this issue? I’m having the same problem.

@TechBoxHD1 7 ай бұрын

Did you manage to find out what it was?

@jamesyeoman2875 Жыл бұрын

Hi I have this problem but pluged in an OBD and there was no error codes! is that still normal? hope you can help.

@soldoesstuff-howtoguide8430 Жыл бұрын

I think the cheap OBD readers are fairly simple. The one at the garage gave back so much more information. Just because it isn't picking up the fault doesn't mean there is one. They are handy for turning off fault codes once you have repaired the fault yourself though which saves you having to go to a garage to do it