How to fix the AKG K712 and many other models Elastic Fix (QUICK AND EASY)

  Рет қаралды 12,357

DemonSoundEU

DemonSoundEU

3 жыл бұрын

in this video i teach you how you can fix the akg headbband issue when the band becomes loose without needing to take them apart this is not the recomeded fix the recomended fix it to take them apart and replace the band this is moe for the people that have liimited experience and wants a quick easy fix

Пікірлер: 37
@BoRaiCho4
@BoRaiCho4 2 жыл бұрын
Thanks for the idea. I used just regular rubber bands and it works great. No zip tie needed as the rubber doesn't slide off like the bands you are using.
@demonsoundeu9583
@demonsoundeu9583 2 жыл бұрын
that probably is a better idea ahahha but rubber bands to me tend to be very brittle i notice
@smithai-justin
@smithai-justin 2 жыл бұрын
Hi, I appreciate your getting me 50% of the way there. I started out by following your guide but didn't like your conclusion. Remove the grill, remove the band, loop the elastic between the headband mount and the cup mount, then reassemble everything. No zip ties required anywhere.
@demonsoundeu9583
@demonsoundeu9583 2 жыл бұрын
ah that was too much effort for me ahhahaha i got these at a steal and pretty much sold them for twice the price I paid
@De4dSp0t
@De4dSp0t Жыл бұрын
I came up with another method that require no disassembly, you start by putting the rubber band around the entire ear cup from the inside so it is now sitting around the circle with the grill behind the headband poles. you then unclip the headband sides and put the rubber band around each claw that goes around the headband and then put the poles back into the headband clips.
@GuNStArHeRo212
@GuNStArHeRo212 3 жыл бұрын
buddy is man handling those cans 😂
@Sithma
@Sithma Жыл бұрын
This worked flawlessy with my AKG, tyvm!
@666Tagada
@666Tagada 3 жыл бұрын
Jesus Christ...what about putting a soft protective matt on the hard wooden bench?!
@demonsoundeu9583
@demonsoundeu9583 2 жыл бұрын
not a wooden bench thats a very very thin venier of wood underneath it is paper in a honeycomb pattern
@progste
@progste 3 жыл бұрын
I may have to try this, my elastic bands are also completely gone at this point!
@ZRay507
@ZRay507 3 жыл бұрын
how much time did the elastic bands last?
@progste
@progste 3 жыл бұрын
@@ZRay507 several years, I don't remember exactly. Also to be precise they didn't break off, they are still there but have lost elasticity.
@ZRay507
@ZRay507 3 жыл бұрын
@@progste ok, got it... i want to get a pair of these, but right now i'm searching to see how much these cans would last me :D
@progste
@progste 3 жыл бұрын
@@ZRay507 I would say besides the elastics they are fairly solid, I've used them daily since 2016. In general keep in mind that any headphone will need some "repairs" at some point, the first thing to go are usually the pads(I've replaced them once) and in some cases the headband as well, but it also depends how much you use them and if you keep them clean they will last a bit longer. Some headphones like Beyerdynamic DT series have the advantage of easily replaceable parts.
@ZRay507
@ZRay507 3 жыл бұрын
@@progste thank you for your feedback at the moment I have a pair of DT770 which need a pad replacement after about 3 years of having them and almost using them daily. The reason why I want to get the K712 is because I have a pair of HD660s, but they lack the soundstage, which is critical for me as I want the best immersive experience for my gaming sesions. Thanks a bunch! :)
@user-xb4nn6ql5l
@user-xb4nn6ql5l 2 жыл бұрын
genius...
@Tigerfox_
@Tigerfox_ 2 жыл бұрын
That is no fix, only a workaround.
@lassivaatamoinen5468
@lassivaatamoinen5468 Жыл бұрын
Some might call it a "slightly ghetto" fix. But he does mention "temporary fix". Also, if you plan fixing the K271, a clean fix will be a bit of a chore, but doable.
@hermann5880
@hermann5880 Жыл бұрын
Wenn ich schon sehe wie der mit dem Kopfhörer umgeht ( keine weiche Unterlage auf der schmutzigen Arbeitsfläche ). Einfach unmöglich ........
@blarghblargh
@blarghblargh 2 жыл бұрын
these cans sound great, but the headband design is kinda crap. the brittle clear plastic piece that the headband tracks on was a terrible idea. worse, they have a cheap individual replacement part for basically everything but this plastic piece. to replace it you have to get the full headband assembly. for $80. and RN out of stock. think I'll just stick with this cheap solution permanently. though I managed to have a slightly more graceful look by wrapping the elastic over the inside first, over the large end of the cups. then it didn't get tangled in the original elastic. Probably will have to hot-glue the elastic on the side that doesn't have the cord coming out of it though
@philipp594
@philipp594 3 жыл бұрын
The ones from my ak k400 from 1994 are still fineish. Dafuq? Were the materials back then that much better?!
@demonsoundeu9583
@demonsoundeu9583 2 жыл бұрын
yeah most people cared more back then you see
@belathewhite6173
@belathewhite6173 18 күн бұрын
had a stroke watching this video, jesus christ
@TheG102
@TheG102 2 жыл бұрын
🤦
@frankbarnowski8189
@frankbarnowski8189 4 ай бұрын
unfortunately a bit incomprehensible for germans
@lewdbar7684
@lewdbar7684 Ай бұрын
I mean it's not a German person so
@ronaldpacher4167
@ronaldpacher4167 2 жыл бұрын
Nice way to handle and repair $500 cans.
@demonsoundeu9583
@demonsoundeu9583 2 жыл бұрын
where the heck are you getting them for 500 i bought mine for 75 sterling they are 200 new as far as i know
@mooseclappin11
@mooseclappin11 2 жыл бұрын
I mean, the MSRP is $600 (if you buy them directly from AKG), but most places sell them for half or less.
@ryangutierrez775
@ryangutierrez775 2 жыл бұрын
STOP MANHANDLING THEM
@DeathStrike-jk8gt
@DeathStrike-jk8gt 2 жыл бұрын
They're fine, dont worry about the durability of the k700s series, i have a pair of k7xx massdrop edition that are made in china not even austria and they been dropped, sat on, kicked over, stepped on, you name it and they're still 100% fine with some minor blemishes here and there. I know the austrian ones are way better quality too.
@ryangutierrez775
@ryangutierrez775 2 жыл бұрын
@@DeathStrike-jk8gt the plastic always fucking breaks
@DeathStrike-jk8gt
@DeathStrike-jk8gt 2 жыл бұрын
@@ryangutierrez775 what plastic? I know the earcups get crunchy but thats pretty much it
@demonsoundeu9583
@demonsoundeu9583 2 жыл бұрын
they are fine they will survive a few rough handling jakers my mate has had a pair since around 2014 throws them around an they are fine good test for quality and durability and my mate owns a portable studio in the back of his van so abused to hell and back never had any issues what so ever they were my cans i can handle them however i want hahahah I sold them after anyways for 2 times what i paid even after fees
@demonsoundeu9583
@demonsoundeu9583 2 жыл бұрын
@@ryangutierrez775 yeah right enough what plastic are you talking about always breaks
【K-ON! mio model】Repairing a dirty AKG Luxury Headphone K701
22:12
熊五郎お兄さんのDIY
Рет қаралды 271 М.
The day of the sea 🌊 🤣❤️ #demariki
00:22
Demariki
Рет қаралды 103 МЛН
孩子多的烦恼?#火影忍者 #家庭 #佐助
00:31
火影忍者一家
Рет қаралды 44 МЛН
AKG K702 Repair - No sound in one ear - Fix
4:30
bad_at_soldering
Рет қаралды 30 М.
HOW TO: AKG Q701 Disassembly & Repair
6:31
Teky Timbo
Рет қаралды 53 М.
AKG K612 pro vs AKG K702 - sound demo
14:28
oluv's gadgets
Рет қаралды 102 М.
AKG K702 Headphone Repair
11:56
프론티어 Frontier
Рет қаралды 12 М.
small shed Saturday #134 - AKG Headphone repair
12:59
the small shed
Рет қаралды 29 М.
The $100 Budget King - Review
8:58
DMS
Рет қаралды 79 М.
AKG K701/702 - The Best EQ Correction Curve for Mixing
6:55
Scan Pro Audio
Рет қаралды 26 М.
Say Mo - LIL BIT & 1 shot 2 (Waysberg Music Remix)
2:43
Waysberg Music🇰🇿
Рет қаралды 263 М.
Jakone, Kiliana - Асфальт (Mood Video)
2:51
GOLDEN SOUND
Рет қаралды 2,9 МЛН
V $ X V PRiNCE - Не интересно
2:48
V S X V PRiNCE
Рет қаралды 1,4 МЛН
Қанат Ерлан - Сағынамын | Lyric Video
2:13
Қанат Ерлан
Рет қаралды 3,1 МЛН
akimmmich (feat. Turar) - UMYTTYŃ BA?| official lyric video
2:54