A step-by-step guide to install the EveryDrop™ Ice & Water Refrigerator Filter 3. Learn more: everydropwater.ca/en/
Пікірлер: 58
@ragnarocking6 жыл бұрын
extremely helpful vid. Thanks
@magazintv67744 жыл бұрын
Whirlpool EDR3RXD1 Everydrop Refrigerator Water Filter Amazon www.amazon.com/gp/product/B00UB441HS/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00UB441HS&linkCode=as2&tag=pdf44-20&linkId=0877105b375b2d24195ca09cc31c75e8
@BEandME2020 Жыл бұрын
My water testing level of contaminates is 480 in red with this water filter do they really work
@mmmlaugh Жыл бұрын
What refrigerator is that?
@Donaldstoner3 жыл бұрын
2020 and I'm having the same issue as everyone else. No water flow out of new filter. Bought one on Amazon, one at home depot.
@donnachristou53033 жыл бұрын
And here I thought I was the only one with this problem...originally attributed it to user error
@lukewill11872 жыл бұрын
What did you do to fix it? I'm having the same problem
@Donaldstoner2 жыл бұрын
@@lukewill1187 I just didn't replace the filter. I genuinely think they slightly changed the design of the new ones to not work on some old fridge models. I bought them from multiple places, same issue. Problem will be fixed once I replace my fridge I guess
@nlpastor2 жыл бұрын
For everyone having a problem with low or no flow after installing a new EveryDrop Filter 3 this simple fix worked for me: kzfaq.info/get/bejne/oc1plsalqcncfXk.html
@michaelmichalojko67293 жыл бұрын
Know how to install a water filter but we only have an ice maker. How do you run 4 gallons of water thru an ice maker?
@oknomad2 жыл бұрын
2 buckets of ice
@bobbiethompson16152 жыл бұрын
button seems to be stuck in the eject position
@bobbiethompson16152 жыл бұрын
filter is leaking in the floor after replacing
@sonjatrattner38242 жыл бұрын
Help, the filter doesn't click into place like it usually does.. and the eject button is all the way out even without any filter in, is something broken? (I'm using a brand new everydrop filter 3, as always). Any help would be much appreciated!
You should lift up the ice maker bar so your water doesn’t come out where the filter was removed.
@mikesweeney52445 ай бұрын
Don"t forget to bring a towel.
@Zhurak6 жыл бұрын
i just replaced this exact filter but now the water doesnt flow anymore. Any suggestions? i pop the filter out and water works, put it back in and its jammed again...
@Everydropwaterfilter6 жыл бұрын
Hi Jay, we are sorry fro the frustration you are experiencing. Please email us at Whirlpool_Digital@Whirlpool.com with your name, address, phone number and model/serial number along with a brief description of what you are experiencing so we can best assist.
@milliebaker40776 жыл бұрын
Try folding a paper towel and putting it at end lets valves seat better
@angieflores8326 жыл бұрын
I just bought this exact filter an hour ago, replaced it and the water just stopped flowing
@Everydropwaterfilter6 жыл бұрын
Angelica, when the filter was replaced, did you try flushing out 1-2 gallons of water through the new filter?
@angieflores8326 жыл бұрын
EveryDrop™ Water Filter yes, I was doing that when it started flowing less and less water and it just completely stopped
@reynahernandez19643 ай бұрын
Es los mejor de la tecnología
@miguelberetta7887 Жыл бұрын
Mine keeps popping out.
@Don-be5ci4 жыл бұрын
My problem is that I can't see why I need an expensive filter if I'm using city water that is treated. I am concerned though, about leaving an old filter installed as it could be actually getting my clean water dirty. I'd take it out but I suspect that would let water run inside the fridge. Anybody know the answer? I wouldn't trust the company to answer truthfully... they're just interested in selling filters.
@runutts20104 жыл бұрын
You can still use it w/o the filter. The purpose of filtering is to eliminate chlorine that they use the treat city water.
@jyoung9434 Жыл бұрын
When you push the button and pull out the water filter, an internal valve automatically switches to bypass the water filter. A lot of people with under-sink reverse osmosis water filters (which are plumbed to feed the refrigerator as well as a skinny spigot on top of the sink) simply remove this filter as it's no longer needed. Then they take the large round cap off the end of the filter (as it's actually part of the lower grille/kickplate at the bottom front of the fridge) and wrap the outer perimeter of the cap with several layers of 1/2" wide masking tape and then stuff the cap back in the hole in the grille to restore the lower grille to it's previous appearance.
@nlpastor2 жыл бұрын
For everyone having a problem with low or no flow after installing a new EveryDrop Filter 3 this simple fix worked for me: kzfaq.info/get/bejne/oc1plsalqcncfXk.html
@wadezombie2 жыл бұрын
Maria you saved me big big headache! Thank you!
@Briz270 Жыл бұрын
That was easy thank you so much!
@no1spuppet9514 жыл бұрын
Just bought 2 of these filters and I am having the same problem as everyone else. Yes, I know how to install it correctly, have had the frig for several years, install new filters every 6 month.. Put the new Every Drop filter in and the jackhammer noise begins, try to run the water through the filter and the stream gets smaller until it's completely stops. Put the old blue whirlpool filter in again and all is well.. So something is wrong with the design or defective filters. I already spent my money on these filters, have none left to purchase more, So now what? Every Drop Filters will you be me with your product?
@magazintv67744 жыл бұрын
Whirlpool Everydrop Refrigerator Water Filter Amazon www.amazon.com/gp/product/B00UB441HS/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00UB441HS&linkCode=as2&tag=pdf44-20&linkId=0877105b375b2d24195ca09cc31c75e8
@tommycutthroat30333 жыл бұрын
Water filter
@tomstenzel42712 жыл бұрын
Same problem here. These filters are junk. May just install an in line filter for a whole lot less money.
@doralarkins10182 жыл бұрын
Fix: For my frig. On the filters end that fits inside the frig there are 2 stems with orings and one prong with nothing on it. The one prong needs to be trimmed, it's too long. Compare with the filter you are replacing so you don't trim to much off. My wording may not be the best, but I hope this helps someone.
@nlpastor2 жыл бұрын
For everyone having a problem with low or no flow after installing a new EveryDrop Filter 3 this simple fix worked for me: kzfaq.info/get/bejne/oc1plsalqcncfXk.html
@chrisitinec17152 жыл бұрын
Why does my water contain so many particles? My cheap Brita filter cleans my water much better then this. I followed the steps thoroughly and still the water isn’t clear. A brand new filter should clean water.