How to Install Polyurethane Engine & Transmission Mounts

Рет қаралды 48,292

7 жыл бұрын

Previous Video ▶︎ • How to Walnut Blast Yo...
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯
In this video, I swap over my 20 year old, crappy, deteriorated, used engine and transmission mounts for some upgraded polyurethane mounts that will not degrade like the rubber ones.
PRODUCTS USED IN THE VIDEO 🛠
P2M Polyurethane Bushings ▶︎ amzn.to/2sNXYae
Polyurethane Engine Mounts ▶︎ amzn.to/2rOm6bp
Ingersoll Rand Titanium Impact Wrench ▶︎ amzn.to/2t7ocqL
Sunex Hex Impact Socket Set ▶︎ amzn.to/2rOkTRt
Tekton Swivel Ratchet Set ▶︎ amzn.to/2t7rATc
Genius 1/2” Impact Shallow Socket with Tray ▶︎ amzn.to/2rOc8a2
Genius 1/2” Impact Deep Socket with Tray ▶︎ amzn.to/2s8cPub
Genius 1/2” Impact Extension with Tray ▶︎ amzn.to/2s8k6dx
Genius 3/8” Impact Socket (Deep & Shallow) with Tray ▶︎ amzn.to/2rObpWf
Impact Extractor Socket Set ▶︎ amzn.to/2u18E4K
Gearwrench Ratcheting Wrenches ▶︎ amzn.to/2t7kFbS
Tekton Hammers ▶︎ amzn.to/2rOvvzE
The polyurethane engine mounts are still not the stiffest option you can get. If you really want to feel the engine’s true vibrations and everything, you can get a set of solid engine mounts that are the exact same size as the upgraded poly ones, however they are made out of solid aluminum and have no flex at all.
These exact mounts that I used in this video will work for any Nissan 240SX that is an S13 or an S14, whether you are using them on a KA24DE, or an SR20DET. The mounting spots are the same so they can be used for either application.
If you have any questions, feel free to send me an email at milanmastracci@gmail.com. Thanks for watching!! :)
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯
Please give it a like 👍 and follow 👣
milanmastracci KZfaq Channel ▶︎ / milanmastracci
milanmastracci Facebook Page ▶︎ / milanmastracci
milmast Instagram ▶︎ / milmast
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯
End Screen Links 🎥
How to Walnut Blast Your Intake Valves ▶︎ • How to Walnut Blast Yo...
I broke it. ▶︎ • I broke it.
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯

Пікірлер: 113

@sherardo922 7 жыл бұрын

17:30 to 17:37 The guy reversing is like " Opps! Wrong street"

@11rockondude 7 жыл бұрын

I don't need notifications, I live on youtube

@TheSaif78 7 жыл бұрын

how the hell your shirt is still white after all this work

@VIP854 5 жыл бұрын

Dude this is awesome. Like every 240SX video is some guy mumbling with overbearing background noise, and recorded with a potato. You spoke clearly, little to no background noise, and video quality its great! Thank you for making a quality video on a 240!

@vdrixn1751 4 жыл бұрын

This is an awesome video. Very detailed and crystal clear.

@PaycoTsunami 7 жыл бұрын

Do a vid on adjusting the valves on the 240! Sounds like it needs a bit of adjusting

@Aaron-xd5vr 4 жыл бұрын

2 years late but, the KA24DE engine in there is cam on bucket. Valve adjustment = re-shimming those buckets. What you're probably hearing is the timing chain guides.

@thetraindriver01 7 жыл бұрын

Great vid Milan, what a difference with the new mounts, that was good. Loved the bit where your tongue gave out and you still kept it in, it makes the vids very unique and entertaining to watch lol, are you going to do a vid detailing what you intend to do with the Nissan? You asked is for suggestions and you said I would be mentioned in the next vid, but that was 5 vids or so back... just thought we could have an update please? Thanks. Keep up the good work and content, looking forward to the next vid mate 🤠 peace!

@CalebColt45 7 жыл бұрын

I need too do the transmission mount on my x runner my shifter shakes bad, good video your pretty informative

@dcconyer 5 жыл бұрын

Thanks for a great video and taking the time to go through the process in a timely manner with good images and simple, clear explanations. Question about your experience after living with the urethane motor mounts for a while. If you you were going to do it again, would you choose to go back with an OEM motor mount to reduce internal vibration or is the additional vibration worth the convenience? I totally agree with the urethane tranny mounts but am curious specifically about the motor mount daily driving experience. I'm about to change mine and have been trying to decide... Thanks in advance for any info. :)

@justin6604 7 жыл бұрын

that sandblaster does wonders!

@milanmastracci 7 жыл бұрын

Oh buddy i know!! I'm gonna make a video about it because its that nice :)

@mclarpet 7 жыл бұрын

The first two things I would dice are the plain washers and the Grower washers. Get some high tensile washers and loctite those socket screws.

@stephensimpson6051 7 жыл бұрын

Great job👍

@SlickEd91 4 жыл бұрын

Really good video

@thespeedteam4267 7 жыл бұрын

I really love your video

@voongnz 4 жыл бұрын

Nice video. Did you have to disconnect any thing like radiator hoses etc when lifting the engine to get clearance for the engine mounts?

@Fedgery007 7 жыл бұрын

Great video

@alundrasrt 3 жыл бұрын

Is there a lot softer mount but same design, please? Thanks.

@slinkyjoe911 2 жыл бұрын

Its just ok having those mounts. I had em for a year, went back for some new stock mounts, maybe I should of kept the transmission mount on. But for a daily, stay stock!.

@pedropablocarranzagianello1472 7 жыл бұрын

Nice video !! see u next.

@SasukeGarage55 3 жыл бұрын

Video help me a lot!

@Walkrev 7 жыл бұрын

une autre modification fait avec succès , bon courage frère ^_^

@milanmastracci 7 жыл бұрын

Merci beaucoup :)

@muhammadyousuf8160 7 жыл бұрын

Is this the same for every car or will there be different engine and transmission mounts?

@tejinder_singh1987 7 жыл бұрын

please help me can you tell how to decode vin on my baleno nexa. i am suppose to pick it up on this coming wed. its an indian car. i am in india these days so... thanks in advance

@sam_znk790 3 жыл бұрын

Somebody knows if that kit fits with a Silvia s14 rhd sr20de engine?

@vaneylen1 7 жыл бұрын

nice vide man.but i noticed that there is some color difference in the car .are you gone do somthing about that

@NarutoUzumaki5678 7 жыл бұрын

Awesome video Milan! Make your brother spend money on the Golf so you can make more videos on it! :D

@ag.3153 Жыл бұрын

What is the torque spec tightening the mounts?

@tompwh 5 жыл бұрын

What about the stock exhaust mount?

@briansmith9193 6 жыл бұрын

Where did you get the brace from

@miguelangelpadillacastaned1937 7 жыл бұрын

nice job bro, personally i had to remove the solid mounts i used my s14 for daily drive and there is a lot of vibration

@lachaim 4 жыл бұрын

Hey I know I’m 3years late but what did u end up going with for mounts

@tacodilegaming 3 жыл бұрын

La Chaim new stock/nismo is the best for getting rid of engine vibration

@lachaim 3 жыл бұрын

Kit Fisto I needed up getting oem style

@thejawzzz398 7 жыл бұрын

Is there any possibility to do the same thing with your brother's Golf, but include replacement of the suspension bushings as well?

@milanmastracci 7 жыл бұрын

The motor mounts and everything for his golf is about 600 bucks american. We did install a new engine mounts on it not too long ago but if the rubber ones go again and my brother buys the mounts i'd be happy to make a video about them

@thejawzzz398 7 жыл бұрын

600 bucks.... this is a robbery...

@Lddrop 5 жыл бұрын

your vids are the best! where can i find the mounts? amazon no longer has them

@joey240sx 5 жыл бұрын

if you still need them, I just bought mine off enjuku

@mrmasonj14 7 жыл бұрын

how would you do a similar upgrade on a ff? front mount front wheel drive

@milanmastracci 7 жыл бұрын

Yep!! Same kind of procedure :)

@jestah7251 7 жыл бұрын

Not a fan of urethane, did my whole car a few years ago. Ended up pissing me off with vibrations and wear and tear on other components were greatly increased. Either way good vid

@psychosaif 7 жыл бұрын

i get vibrations when i let the clutch go in first gear and the same thing happens in reverse. All other gears are fine. Could it be mounts?

@gangsterbear187 7 жыл бұрын

psychosaif clutch damper

@jfresh2054 7 жыл бұрын

feel like the washers should be bigger to distribute the force

@azharfahry_ 7 жыл бұрын

i think u should clean the engine bay. and make a video about it!

@riosxvert7053 4 жыл бұрын

Is there any way to stop the vibration?? Or should I just get oem replacements?

@lachaim 4 жыл бұрын

Did u go with oem or what exactly looking to eliminate basically all the vibration but still need to replace my oem should I buy another set of oem or should I just grab the aftermarket oe ones

@rayravshanov 4 жыл бұрын

do you have to disconnect anything from transmission ? i feel like its gonna give some stress to it when u jack up the engine. Someone tell me the answer please. soon i ll be replacing those

@milanmastracci 4 жыл бұрын

Technically you are putting a bit of stress on it, but not to the point where you are going to damage anything. When you drive your car very conservatively, you are putting stress on those components too. if you raise it gently and don't crush any electrical harnesses, you should be fine.

@iAnormal13 7 жыл бұрын

Amazing! I have a question. Does your car steering wheel, the pedals, or the seat, vibrated because of the engine mounts where bad, or is that not correct? Just a quick question, thank you!!!

@milanmastracci 7 жыл бұрын

Oh no, it vibrates a lot lol

@iAnormal13 7 жыл бұрын

milanmastracci lol thank you for responding, I really was on doubt. Thank You and keep up the good work!!

@neptuneb8707 7 жыл бұрын

Wish it was that easy for my 03 maxima 😢

@DB-ub2wt 7 жыл бұрын

How do you know when the jack is raised enough under the engine?

@DB-ub2wt 7 жыл бұрын

Helppp

@rehlek 7 жыл бұрын

DatBoi when the engine starts to move from the jack.... stop jacking

@milanmastracci 7 жыл бұрын

You just need it raised enough so you have less stress on the mounts. After the mounts have the nuts removed from them, you still have to raise the car up to get the mount out so there's no worry there.

@jonathonmonteith9965 7 жыл бұрын

hey man are you heading out to cayuga tomorrow

@milanmastracci 7 жыл бұрын

YES!!! :)

@diavalus 7 жыл бұрын

Song name?

@Terenc3Le3 7 жыл бұрын

do you use loctite for the mounts?

@milanmastracci 7 жыл бұрын

No I did not. That is what the lock washers are make for.

@al3xei358 7 жыл бұрын

Yas!

@cesarm.gonzalez2663 7 жыл бұрын

thumbs up milan! What's up with your brother has he thought about doing his channel?

@milanmastracci 7 жыл бұрын

I keep bugging him about it but nothing has changed

@parvmittal2512 7 жыл бұрын

Can u suggest any gud screwdriver set ?

@milanmastracci 7 жыл бұрын

This is the set that I have and I love it: amzn.to/2u8mVfT

@juanchavez9380 7 жыл бұрын

what is the thing he's pushing called at 1:26?

@milanmastracci 7 жыл бұрын

I was turning the throttle plate. Not all cars have access to turn it like that as this car is throttle by cable, as opposed to most modern cars using throttle by wire (where it is electronic instead of mechanical).

@juanchavez9380 7 жыл бұрын

milanmastracci oh okay! thanks

@ShizaP 7 жыл бұрын

Dumb question.If you have 1,000 hp engine will this still be reliable?

@M0beast 7 жыл бұрын

Only if the car has racing stripes

@milanmastracci 7 жыл бұрын

All depends on the size of it and the amount of stress you're putting through your components.

@nutter4butter 7 жыл бұрын

Am I the only one that noticed the ant on his shirt?

@AdventureeX 7 жыл бұрын

🤘

@anonymous-ky8gg 6 жыл бұрын

I swear so much when work on my car.. 😛

@kdavidse 5 жыл бұрын

I have solid mounts on my S14 and OMG the vibrations can get annoying Also, I was getting irritated with how you pronounce “out” BUT, thank you for the video I feel more confident doing this myself. The solid mount on my trans BROKE, so since I’m gonna replace that I’m gonna replace the engine mounts too. Thinking of doing softer than solid ones but a solid mount on the trans

@rayravshanov 4 жыл бұрын

i was irritated to how he said out. But do you have to disconnect anything from transmission ? i feel like its gonna give some stress to it when u jack up the engine

@justhesolution 3 жыл бұрын

That's how Canadians say "out " chill lol

@slinkyjoe911 2 жыл бұрын

Just changed mines to stock, im very happy with my 240 now, i do thing a solid transmission mount makes sense 🤙

@luisramos8654 7 жыл бұрын

those mounts look like my longboard wheels

@milanmastracci 7 жыл бұрын

LOL yeah they do!!

@luisramos8654 7 жыл бұрын

milanmastracci Look up orangatang in heat and those are the wheels i ride, btw i love your videos and the enthusiasm you have making videos.

@salmanslim 4 жыл бұрын

Awout!!

@SasukeGarage55 3 жыл бұрын

MENGA MINT!!!

@guiririque 7 жыл бұрын

That rust looks like cheese LOL

@beatlebabe1969 7 жыл бұрын

Ay how about a car tip I really need: how to get goD DAMN black widows to stop living in my ENGINE!!?!??!!? Help pleaseeeeeee

@DavisSgt 7 жыл бұрын

beatlebabe1969 Clean your engine bay lol

@zackw.varela326 7 жыл бұрын

beatlebabe1969 pressure washer🤔

@MrQuijano187 7 жыл бұрын

Is This too extreme for a daily driver? Any opinions are welcomed !!

@doug774 5 жыл бұрын

has this guy ever heard of pen fluid

@tarek3702 7 жыл бұрын

shared and liked ur video and first

@drizzyxdre7971 7 жыл бұрын

Anyone else notice the bug crawling on him in the beginning of the video?

@milanmastracci 7 жыл бұрын

LOL I just noticed that ahah

@mikroks5543 Жыл бұрын

The vibrating is exactly the reason you don't want the polyurethane or solid engine mounts at all or ever... it gives you no performance benefits at all the vibrating and rough ride is so bad it will do your head in long before another set of rubber ones would wear out... same goes for sub-frame bushes rubber bushes and you can go urethane on the rear control arms... you will have comfort and noticabale performance benefit.

@nahuelluna7071 7 жыл бұрын

damn... my fiat have less rust than that lol

@imnota 7 жыл бұрын

He's in canada,everything rust there, even plastic lmao

@nahuelluna7071 7 жыл бұрын

lol

@kimaniharris7922 7 жыл бұрын

5th!

@DanoPT 7 жыл бұрын

So much rust on that pour car!!!

@milanmastracci 7 жыл бұрын

Thats what 20 years will do to a car in Canada

@Ra20r97 7 жыл бұрын

I just wanna know....How is your shirt not dirty?

@gedasalekveravicius5466 7 жыл бұрын

Why not solid engine (also rear subframe) mounts? I know they have same thoughts as welded diff (they reduce comfort and etc.), but they won't wear out for EVER. And dont miss, that they can hold ANY power. Also your mature and you have your own opinion and don't have to listen to 14year old. Yust a suggestion0

@milanmastracci 7 жыл бұрын

I contemplated it but I still want to have decent drivability with the car. I'm not looking to make this thing a full blown race car, but in the event that that changes, solid engine mounts will definitely work.