How to Install the Delta® T17 Cartridge & Trim

Рет қаралды 130,405

Күн бұрын

Watch as Hannah walks through how to easily install the Dual-Function Delta® T17 Cartridge & Trim (model numbers typically begin with T17). The multichoice universal rough valve from Delta® works with a wide range of styles and finishes. See our supply list and video shortcuts below to make installing even easier.
You'll Need:
- Phillips head screwdriver
- Hex key
- Adjustable wrench
- Plumbers Tape
- Towel - Thermometer
Steps:
0:00 Intro
1:01 Dual-Function Valve Cartridge Install
3:38 Install Shower Arm and Shower Head
6:18 Tub Spout Install
8:42 Valve Trim Install
10:56 Adjust Rotational Stop Limit
Installing a different cartridge and trim? Check out our other installation videos:
How to Install the Delta® T17T Cartridge & Trim - • How to Install the Del...
How to Install the Delta® T13/14 Cartridge & Trim - • How to Install the Del...

Пікірлер: 55

@aleekat73 10 ай бұрын

Excellent video. Follow this video you won't go wrong. For those who say they get barely any water. I suspect he adapter was not fully seated. It's the part you put in before the cartridge. I used some o-ring grease. The temp handle will always move with the flow handle. Temp will not change from what you set it at.

@richardlehoucq9821 Жыл бұрын

Well-produced, helpful, video. One minor improvement is to first check that the wall plate screws are long enough before you add the silicon to the back of the wall plate. Mine were not so that Hannah's suggestion to call delta CS resolved the problem. CS was helpful and mailed me longer screws once I supplied the model number on the trim box.

@deltafaucet Жыл бұрын

We were happy to help out, Richard!

@user-qe1oo9tl5w 10 ай бұрын

Absolutely perfect!!! Thank you.

@vickiechristianson5459 Жыл бұрын

Super video. Very thorough. I really appreciated being able to install the valve myself. Especially since I know nothing about plumbing. Thank you.

@deltafaucet Жыл бұрын

We are happy to help, Vickie! Thanks for being a great Delta fan ❤️

@elmerkerth3871 8 ай бұрын

I like all your videos on the Delta tub and faucet thank you I want to install one for myself

@mohandasu43 7 ай бұрын

Thank you very much Mam. Well explained to understanding to any person to do the job. Thanks DELTA.

@nicholasvalentine4221 10 ай бұрын

Very helpful

@tylerngo4894 2 жыл бұрын

Camera should move little closer.

@bradleybuyer5541 Жыл бұрын

Thanks! Most videos leave out the part about adding silicone sealer to the back of the trim ring gasket.

@deltafaucet Жыл бұрын

We're happy we could help!

@aservantofYeshua Жыл бұрын

Thank you thank you thank you

@weissmitch207 2 ай бұрын

Excellent video. I remove the mixing valve every fall and winterize our cottage. Then in the spring I re-install the valve. Should I lubricate the rubber pieces with the springs on the adapter? Also my hot side is directly in the middle.

@michaelsyoutubechannel5857 9 ай бұрын

What's the best way to remove the trim ring she snapped in when you want to remove the trim kit.

@chetto203 11 ай бұрын

Don’t silicone weep hole but you thread it on smearing silicone in weep hole ?

@jasensigafuse7130 Жыл бұрын

I can’t get any water pressure after installing the cylinder I have plenty of water flow before only a trickle after

@sandracohen8481 Жыл бұрын

Need help installing the adapter please

@gerald4674 7 ай бұрын

What’s the purpose of the debris screen if it’s only in one water supply line? Is it in the hot or cold?

@austinhodges1994 8 ай бұрын

If the top piece (temp adjustment knob) is really loose how do I fix that?

@DG-fe4ht Жыл бұрын

Installed cartridge and no water comes out…. Or barely a trickle. With cartridge out, water pours out full pressure. Any ideas?

@Brettdyt 2 жыл бұрын

Seems like you should lubricate the cartridge. If you don't then A) It will be harder to put in, B) the o-rings will deteriorate faster and C) It might be impossible to get out after years of calcium and mineral build-up, I just damaged mine trying to pull it out after 20 years.

@deltafaucet 2 жыл бұрын

Hello Brett, Thank you for reaching out. Our parts do come lubricated from the warehouse. It is possible that flushing the shower regularly could help with calcium buildup. To do this, turn off the water supplies, remove the cartridge, and turn the supplies back on for one minute. Our products do have a Limited Lifetime Warranty that covers parts (other than electronic parts and batteries) and finishes of Delta® faucets purchased from authorized Delta sellers are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed. I have included a link below for the warranty information. www.deltafaucet.com/service-parts/warranty -Kelley

@mvadu Жыл бұрын

If I already have an existing valve can I still follow these instructions and install this? I currently have a single handle valve and want to switch to independent flow and temperature control valve.

@deltafaucet Жыл бұрын

Hello mvadu, Thanks for contacting us! Yes, you can use your existing valve with a new trim kit! You will need to use the cartridge assembly provided with the new trim kit for use. -Kelley

@miguelp4812 2 ай бұрын

You need a series 17 or 17t kit. T is thermostatic, btw.

@user-nn8eu9iu7s 7 ай бұрын

I am removing my handle but the volume control won't come off.

@miguelp4812 2 ай бұрын

Silly to include the teflon tape instruction. That's unrelated to delta 17t series kit installation.

@Scott-eo7lj 9 ай бұрын

How do you remove the temp handle since it just clips on? I'm afraid of breaking the plastic is attached to

@Degrative 5 ай бұрын

Did you ever find a solution to this?

@DicksonMyaz 5 ай бұрын

Use a razor blade, or something you can push the clip down with and it will pop off

@paulgillis4677 2 ай бұрын

@@DicksonMyaz Not all temperature handles can be pried off. First check for a very small hole in the cylindrical part of the temperature handle, kind of hidden behind the lever part. If you find that, it should have a little plug in it, which needs to be pried out with a sturdy needle or the tip of an awl. Then you'll see a set screw in the hole that you'll need to loosen with an Allen wrench. Then you can pull the temperature handle straight off.

@Ro0B0o Ай бұрын

@@Degrative Me and my dad just wiggled it side to side and it came off easily

@jamiescialdone839 Жыл бұрын

How do you remove the handle to adjust the water temperature?

@Avalucialove Жыл бұрын

I have the same question…The temperature handle is wobbly and loose but I cannot see where to tighten it?

@danieldoherty5034 10 ай бұрын

Pry it off from the side opposite the handle stem. If it’s wobbly, it’s because the screw underneath is loose.

@paulgillis4677 2 ай бұрын

@@danieldoherty5034 Yes, there is a screw underneath the temperature handle that probably needs to be tightened. But not all temperature handles can be pried off. First check for a very small hole in the cylindrical part of the temperature handle, kind of hidden behind the lever part. If you find that, it should have a little plug in it, which needs to be pried out with a sturdy needle or the tip of an awl. Then you'll see a set screw in the hole that you'll need to loosen with an Allen wrench. Then you can pull the temperature handle straight off, then tighten the screw in the center of the valve stem (using another Allen wrench).

@stayfido Жыл бұрын

My temperature control handle will not pop onto the unit, no matter what I try. Any tips?

@deltafaucet Жыл бұрын

Hello Ken. Thank you for contacting Delta Faucet Company and we are happy to help. We recommend making sure that the rotational limit stop is installed correctly with the arrows facing the right directions. With any further questions or concerns, please send us a private message with your contact information. -Carrie

@danieldoherty5034 10 ай бұрын

Insert the handle side over the smaller tab on the control disk, then snap the other side opposite the handle stem onto the larger tab on the control disk.

@mitriwalston4109 Жыл бұрын

The screw that comes with the handle on the T144339-bl-pp does not fit. Any suggestions?

@deltafaucet Жыл бұрын

Hello Mitri. Thank you for contacting Delta Faucet Company and we are happy to help. Please send us a private message with your contact information for further assistance. -Carrie

@ranranwild11 Жыл бұрын

When she assembles the temp gauge the handle is facing to the right. When she turns the water on to check the temp the handle is facing down. What's up with that?

@kurtboso2243 2 ай бұрын

Plastic cartridge teeth keeps getting ate up by the metal handle teeth. Needs fixed.

@ronys1973 Жыл бұрын

Followed all of your steps, but when I moved the temp control to adjust the water temp, the volume handle moves with it, I ENSURED the screw is not over-tied. I called CS and they were no help, they actually sent me this video...any ideas?

@kimberlydismuke2922 Жыл бұрын

I’m having the exact same problem. 😌I just run scalding hot water then turn it to cold until ready 😂

@ronys1973 Жыл бұрын

@@kimberlydismuke2922 that's exactly what i do too 😏

@cameronlakotich6586 Жыл бұрын

Figured this out today. The white part that the screw goes into has to be turned to the opposite stop before installing the part over top