How to make a twig pot with 2(!) nozzles? Woodturning a twig pot...

Рет қаралды 6,563

3 ай бұрын

In this video Ronald Kanne (woodturner in the Netherlands) makes a twig pot with 2 nozzles out of a piece of ash. Two nozzles on top. 2 Nozzles on top? How?!?! simple... have a look!
The video has English subtitels...
Oh, and by the way.... Sorry for the terrible thumbnailpicture... :-)
About Ronald Kanne
Ronald is a wood turner in the Netherlands. He makes commissioned work and his own free work. And every week turns out to be a little too short to get all the work done... He also runs a webshop for other wood turners. It's called: www.dehoutdraaierij.nl. This webshop is in Dutch, English and German. The website that contains his own work is called www.ronaldkanne.nl. You will also find these links in the video.
Tools used in this video:
Roughing Gouge: dehoutdraaierij.nl/en/shop/ch...
Parting tool: dehoutdraaierij.nl/en/shop/ch...
spindle gouge: dehoutdraaierij.nl/en/shop/ch...
Skew: dehoutdraaierij.nl/en/shop/ch...
Stronghold chuck: dehoutdraaierij.nl/en/shop/ac...
Dovetail jaws: dehoutdraaierij.nl/en/shop/ac...
Camera en editing: Lies Geluk, www.witmanwigwamfilm.com

Пікірлер: 45

@donaldadams5342 Ай бұрын

Very clever piece. I love the playful attitude of your videos & your banter with your videographer, it shows how much you really enjoy what you do. I am really enjoying your videos now that I have found you. Cheers, Don from South Australia.

@ronaldkanne Ай бұрын

Thanks Don, good to hear!

@NBCRGraphicDesign 3 ай бұрын

Here in the USA when couple splits the cost of a meal (each pays ½) we call that "going Dutch". NOW I can make this double twig pot for my bride and we can truly "Go Dutch" with our flowers! Thanks!

@ronaldkanne 3 ай бұрын

Haha! Yes there are a lot of bad things where Americans use the word Dutch to express that it is really bad.... 😂

@NBCRGraphicDesign 3 ай бұрын

@@ronaldkanne It was NOT meant as a slur.... But as taking responsibility for our own expenditures and being fair to each other. BTW, my own American Beauty celebrates its first birthday next week. I love your videos!!

@jimgeelan5949 3 ай бұрын

Longtime no see Ronald & camera lady 😊 but its lovely to have you back with your very different project, camera work and music 😊thank you both

@Bunk599 3 ай бұрын

Clever project.Entertaining well crafted video. Lies background chatter is enjoyable. Finally I don't understand the need some commenters have to tell you what you do wrong and how to do it better....it is obvious to me you have exceptional skill, know what you are doing, still have all your appendages and no visible facial scars.

@ronaldkanne 3 ай бұрын

Thank you Bunk!

@bjarnelaursen4807 Ай бұрын

I like your videos and your ideas. Always very educational and funny. Will we never meet Lies?

@ronaldkanne Ай бұрын

One day she will be turning and I will have the camera... :-)

@mirco.pick14 3 ай бұрын

Another amazing project, pleasurable to watch as always. Thanks Lies and Ronald for all the effort.

@garthkeck2003 3 ай бұрын

What a grand bit of trickery. Can't wait to try it. Thanks

@gfsimmons1 3 ай бұрын

Thank you for the content, I enjoy your style of demonstration.

@earlbishop2314 3 ай бұрын

Thanks so much for sharing your knowledge and humour. Enjoyed watching you make the two ash holes…..Take care and stay healthy and safe.

@michael-azzopardi 3 ай бұрын

Very nice idea and a job well done.

@garyjanes2358 3 ай бұрын

And, it was worth the wait!

@garyjanes2358 3 ай бұрын

I thought you were going to use a multi-axis technique!

@debbiecoull6957 3 ай бұрын

This is a fun idea. Kinda clunky, but fun.

@ronaldkanne 3 ай бұрын

Clunky... that's the word! 😀

@davidrust7480 3 ай бұрын

Great job Ronald

@ronaldkanne 3 ай бұрын

Thank you David!

@parsadaghighi8422 2 ай бұрын

Your videos are so educational and lovely to watch. How would it be come if we do the process backwards ?!🤠

@jeanlong4285 3 ай бұрын

Very nice

@boazjoe1 2 ай бұрын

Amazing how much he looks like Ron Reagan, jr.

@ronaldkanne 2 ай бұрын

Oops!? Let me check that out... 🙂

@dtork47 3 ай бұрын

What a great idea, gonna have to try that! Thanks for sharing and you two stay safe?

@ronaldkanne 3 ай бұрын

We'll try! tnx!

@foneman12134 3 ай бұрын

Great project Ron, Awesome camera work Lies! I just love how you both have so much fun with the videos. I need to ask about the adapter that you clamp into your chuck, Who makes it? and is it available in the U.S. I think I will try this today, I don't have ash available so I will try it in oak,

@ronaldkanne 3 ай бұрын

It is called the Stardrive and it is produced by Simon Hope. But I don't know if it is sold in the U.S... Thanks for your kind words!

@boerwjansen 3 ай бұрын

Bedankt, Zat het hele filmpje weer met een grijns te kijken 😂

@christopherharrison6724 3 ай бұрын

Surely only turners would appreciate the extra work it takes to make it dbl.

@ronaldkanne 3 ай бұрын

Yes, like only turners go into a hollow form with there fingers to check the smoothness of the surface...🙃

@rogerbossart9586 3 ай бұрын

You and your photographer are my absolute favorites on the planet. (Watch the solar eclipse next month?) How do you come up with these extraordinary ideas? Lots of time with your students?Now, I have only two comments: you should wear a face shield and mask. I’m a bit older than you, so I must take care of myself on my lathe, and, your hair is getting very Nordic-like! Very cool, from this bald guy! From your friend in California on the third planet from the Sun.❤

@ronaldkanne 3 ай бұрын

Now that i read your comment i regret that i got a haircut last week...🙂

@davidanderson5767 3 ай бұрын

Kind of looks like specialized binoculars of some kind.

@andrelammers8605 3 ай бұрын

Super mooi gemaakt, complimenten, maar als je bijde halsjes van de vaas eerst uit boord met een holle boor, lijm ze na het draaien terug, dan hoef je de basis niet te splitsen toch? Én blijft de houtnerf toch doorlopen. Voor een beginner eenvoudig en minder risicovol. Complimenten voor het vakwerk in je video's gr André (uut wehl)

@ronaldkanne 3 ай бұрын

Klopt! Meerdere manieren zijn er. Deze vond ik leuk om eens te maken. Maar misschien doe ik m nog wel eens maar dan anders...

@andrelammers8605 3 ай бұрын

@@ronaldkanne wat ik nagenoeg nooit op KZfaq vindt is een werkstuk, voor de professional en de beginner, met een soortgelijke uitkomst. Dus meerdere manieren van maken. Jij als vakman pur sang, met jouw humor, en de manier van uitleg, kunt daar een grote rol in spelen, zo krijg je ook jongeren enthousiast. Nogmaals complimenten

@garyjanes2358 3 ай бұрын

I am waiting with bated breath to see this secret!

@ronaldkanne 3 ай бұрын

Don't hold your breath too long please! :-)

@user-wg7dx7er8w 3 ай бұрын

I thought you were going to do something amazing, it would of been easier to turn a vase then board three holes in the top, turn three necks to go in, this would’ve been a lot quicker, the vessel was still being the same all the way round in grain, and I believe this will be called a threesome, 😂, masks and face shield On , for safety reasons, I’m not saying you haven’t got a pretty face, but I’m damn sure it will hurt if something came up and hit you, and obviously your poor lungs, 🫁, and another thing I bet this gets taken down, Especially as I was set up by a ducks couple about two years ago, I went out my way to try and help them with their property in France, just to find out that I was being used, I love Woodturning many years in the woodwork industry working for myself, I think you have made some amazing products over the years, and I have been following you for quite some time,

@ronaldkanne 3 ай бұрын

Yes, you are right of course about the way the nozzles can be made. But this was fun also! Next time i'll do it your way... promise! 🫠

@user-wg7dx7er8w 3 ай бұрын

@@ronaldkanne please be safe, you are only here once, I am in my 70s and I wish I was still back at work, I am getting ready to lay 6 m² of concrete next week, weather permitting, I am having to go back to work, because I have been scammed by my ex, and what I thought was my friends they were setting me up, , I thought there was something going on, I thought that I had done something to upset them, so I purposely went out and purchased a beautiful plant just over €100 and some sweets as a . Sorry gift 🎁, just to find out that I was being used, And I don’t even have a lot of money. This was a waste , as it was not appreciated, two female A A , one English and one Dutch. I’m sorry to say, At my age, I should be enjoying life with friends and family , and they have all destroyed my life, even to the point of trying to take away my sons inheritance, and was forcing me to sell my tools and machinery, worth Tens of thousands of pounds, So I now live by myself in the French countryside. I do not speak to anybody I do not trust anybody and occasionally I put a comment out like this on KZfaq , Being loyal and faithful to somebody and your friends and family should mean a lot, and when you need help and then find out who your friends and family are that all loyal to you, they take the wrong side because she is a female,

@johnwhitteron5296 3 ай бұрын

You seem to miss the point. Ronald was showing us something different and interesting.... not 'easier'.

@bobraasch8699 2 ай бұрын

Ron, what treat or the eyes & ears. Great sene of humour. May give ago someday! Recently ran into your channel. They're wonderful.