Just look at the video and remember step by step and be confident when you get on it. You got thiss

Lol bro me too hahaha I got an interview tomorrow!! I've been sit down for years but never a stand up

Update! Fck up my God damn wrist driving the electric pallets jack wakl tf out

❤

@@srtcreationscisame boat

😂😂😂😈👍🏼🔥💯 That’s ritee I’m glad to hear that champ keep it up congrats 🍾🎊🎉💯🔥

Man you know well you crashed your first day lmao

Definitely you are correct but I am pretty sure once you get the feel on the PIT you would know just the right amount of pressure plus you’ll get to drive it to the location where you’re going to get tested so before getting their try to feel how far you can move the joystick 🕹 to know how fragile it might be . But stay bless

Over-steering can lead to flip over on sharp turns. The steering can be adjust to specific setting delay to counter measure your speed turns,but warehouse company bypass these setting to mass produce their productivity. I have work on these forklift and maintenance it so i know what fuck am talk about. Alot of southern warehouses operate in this function. Scary... So ask questions about safety !!! if you want to go home in one pieces.

Mine sprung a hydro leak in the aisle the other day. Spill guy came with the cleanup kit, and HIS truck sprung a leak in the same aisle.

Lol

Well I’m very glad you ran into my training video lol great to hear you got the job congratulations buddy and keep it up 👍🏼 thanks for the support 💯😈

😂😂 did you do good? I lied on my application and now I have a test tomorrow

Thanks bro I really appreciate it that. Goodluckk👌🏻

Nice video sir I'm learn in this forklift tar

Yes definitely that is great to hear . I hope it was what you were looking for. You work in a warehouse?

Any time

Haha I bett yea their a lil bitt different but their kool. Hope everything went good with you. Stay safee

Hey Royce thanks for that feed back my G hope it all goes good for yourself stay up playa 💯💯💯👌🏻

Well I’m very glad that I was able to help you in what you were looking for. Hope you get the job

How did it go ?

@@Notepad123 I Aced it Been Driving a Reach with ease since It's like riding a bike Once you learn you got it Takes a few tries but you get it

You're welcome bro. Hopefully everything went good for you. If you ever wanna know about other equipments let me know I'll be glad to demonstrate

I’m glad I was able to help out in any way hope you got the job brother

@@fearthecontent1464 already good at it brother! 😎

That's awesome to hear Gilbert hope it all goes you're way .

You're welcome bro I try to make videos were ppl can actually understand the proper way to use this equipment other videos cutt out the specifics. So yes tha ks for you're feed back.👌🏻

How did it go?

I actually did , I was the supervisor for the 2nd shift hope you got what you were looking for 👍🏼💯

Im glad I was sort of a help but you'll be great don't worry just have trust in you're self you got this. Thanks for you're feed back

I just hope you get to work in an environment where you get the time to learn to drive one and especially to drive the specific machine you are using as every model is different. I was glad the first truck I was about to load the first day I got my certificate was manned by a down to earth driver, who approached me: 'We've got all day. Don't rush it. As long as you keep yourself, the forklift, my truck and the goods you are handling in one piece, I'm happy. Take it slow and we'll get there.' Glad he said that, but even though I did not complete the job and let my co-worker do it (I was only trained on electric forklifts, while the one I had to use was a fuel-operated one which is completely different)

Just take your time, the steering is going to be the hardest thing to get used to on a stand-up truck of just about any kind...this particular kind of truck drives easier going in reverse the entire time, so the steering is going to be reversed the entire time you're going "forward", just take your time. This particular truck can also get up to a decent clip pretty quickly and can have steering that's sensitive. So very very important to take your time and get used to the nuances of how each truck is set.

@@gamechaser002 Exactly, I used this model for many years before we switched to Crowns, after a little while with the Raymonds, it becomes "muscle memory" . The more you use it, the more you get better. Like anything. But then the Crowns came in, and oh man, had to re-learn all that memory, it sucked, but again, you do things everyday and it becomes the norm. Just cause they were a little different.

@@gamechaser002 I thought the crown is only inverted

Thanks bro im glad I was able to help 🙏 stay up & safe out their 👌🏻👌🏻👌🏻💯

I'm pretty sure you might get like that, But a lil advice when you happen to get on a reach forklift forget that you're being watched and graded. Do you're you're thing and be confident about what you're about to do . I use to be the same way but one time I enter the warehouse like I owned the place and got on it and forgot anyone was their and I passed it with flying colors ever since then I haven't looked backed now I'm able to operate every type of Forklifts their is to know. You got this 💪🏻👌🏻💯❗

Eric Lemus thank you bro. I will be studying your video cuz you break it down very well and being Latino puts me at ease lol . So thanks for your simple breakdown and guidance

@@Skorp-eon I'm glad I was able to put you at ease and that my video is being very helpful to you. Best Of Luck To You Bro . If you wanna know more about other forklifts just let me know and I'll put more videos

Hey I was the same way but after a week or so it was cake just like what Eric said be confident and ease just be you

@@fearthecontent1464 Preach!

Im happy you got you're license brother im glad to hear i was a helping hand . awesome

Good luck on you’re interview I hope 🤞🏼 you get that job you deserve it don’t forget to like and and subscribe thanks

@@fearthecontent1464 got the job brehbreh thanks.

@@cuddy7174 That’s wassup glad to hear that. Recommend this video to other ppl that are looking for that knowledge. Stay positive fam💪🏼

Awesome to hear that, I wish some one would of broke it down to me this way when I first started but this is why I decided to made this video glad to hear it worked out for you thank you

That is awesome bro 😎 I’m glad you got it down to the T keep it up 💯

I hope you get this and use it to you're full advantage good luck .

For sure I’m happy I was able to help you out my friend 👍🏼👍🏼👍🏼💯

Yup I’m glad my video could be of some use I appreciate it

You’re very welcome it’s a pleasure to be able to help you out 👍🏼💯

You're welcome hope it helped you with what you were looking for 👌🏻

@@fearthecontent1464 Yes Indeed! I have a test on it tomorrow, and it's been awhile since I been on a stand up.

Yea no problem

For sure bro I appreciate it that. Thanks for the feed back 👌🏻

Well I am very happy you enjoyed this video honestly I’m glad I was able to help in anyway stay bless😉👍🏼

Awesome to hear that hope you do great

Getting the hang of it yet?

@@josh6059 yeah can grab pallets from the 3-4 rack no problem just have to line up good. I drive at 2-3 usually for speed setting

Yup you’re welcome without a doubt 💯💯💯

You're welcome, & I try to be helpful for those that need the knowledge with this types of forklifts 👌🏻

The crown is like that the raymond no

Yea that's true . Guy on the bottom answered my question. Their quieter different

Thanks

No problem bro I highly appreciate it for you’re comment

Que onda canijo wassup with you whats good. Msg me 5623746455

That’s awesome to hear stay strong 💪🏼

How is that?

@@fearthecontent1464 it’s pretty amazing.

@@emmanuelmelendez23 what’s your job title?

I'm glad I was able to help bro have an awesome day n hooe you found what you were looking for 💪🏻

Thanks alot❗ Hope it served you to best advantage 💯👌🏻

You’re welcome hope it helped you out

okay sounds like you're determined to learn , I would definitely be uploading a few more videos so you can learn those your asking for. Just be patient do to this covid19 I havent been inside a warehouse, but i got you bro. Goodluck out their .....

No problem bro💯👌🏼

You’re welcome I hope it was of great use for you 👌🏼💯👍🏼

Awesome I’m glad I was able to help you out on this journey of yours good job

Thank you! Cheers!

Hey thank you my Wasim I appreciate it you're compliments . Hope it helped you out 👌🏻

Glad to hear that

Haha That's riteee💯💯💯

Yes their is on the control panel it should have an arrow up & down or an image of the forks and up n down . But it’s their

I suree did 🤣 👌🏻

😂😂💯

Thanks Bro👌🏻💯

Sound weird but it’s true they didn’t have time so my first full shift and never operated a stand up so like I’m nervous as hell

Awesome dude 💯

No sir I'm from California why the question???