Рет қаралды 272
Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ib/1ASSL00397
This video shows you how to install new front sway bar links from TRQ on your 2010-2014 Volkswagen GTI. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.
Estimated installation time for a professional technician is approximately: 36 minutes
This repair was done on a 2014 Volkswagen GTI Driver's Edition 2.0L Hatchback 4-Door FWD Manual and the process should be similar on the following vehicles:
2010 Volkswagen GTI
2011 Volkswagen GTI
2012 Volkswagen GTI
2013 Volkswagen GTI
2014 Volkswagen GTI
Tools you will need:
• 18mm Wrench
• 17mm Socket 1aau.to/ocbE/1AXAA00015
• 18mm Socket
• Locking Pliers 1aau.to/ope/1AXAA00139
• Torque Wrench 1aau.to/obfd/1AXAA00044
• Gloves 1aau.to/obcx/1AXSS00048
• Safety Glasses
• 5mm Hex Wrench
• Floor Jack 1aau.to/oaAp/1AXAA00068
• Jack Stands 1aau.to/oand/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.