Buy Now!
New Parking Brake Shoe Set from 1AAuto.com 1aau.to/id/1ABPS03842
This video shows you how to install a parking brake shoe set on your 2008-2013 Nissan Rogue. For drum brakes and parking brakes, shoes will eventually need to be replaced.
This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• Pry Bar 1aau.to/oRv/1AXAA00020
• 17mm Wrench 1aau.to/oT6/1AXAA00010
• 14mm Socket 1aau.to/oboI/1AXAA00015
• 21mm Socket 1aau.to/oadA/1AXAA00043
• Brake Caliper Hanger 1aau.to/oia/1AXAA00439
• Needle nose pliers 1aau.to/oCi/1AXAA00051
• Needle nose pliers 1aau.to/oCi/1AXAA00052
• Ratchet 1aau.to/obwv/1AXAA00016
• Torque Wrench 1aau.to/oaAb/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves 1aau.to/oXb/1AXSS00048
• Safety Glasses 1aau.to/oQm/1AXAA00343
• Floor Jack 1aau.to/oZ2/1AXAA00068
• Wheel Chocks
• Wire Brush 1aau.to/osg/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.