How to Replace Serpentine Belt 07-09 Toyota FJ Cruiser

Рет қаралды 35,555

1A Auto: Repair Tips & Secrets Only Mechanics Know

5 жыл бұрын

Buy Now!
New Drive Belt Component Kit from 1AAuto.com 1aau.to/ic/GAEEK00246
In the video, 1A Auto shows how to remove and replace the serpentine belt. The video is applicable to the 07, 08, 09 Toyota FJ Cruiser
🔧 List of tools used:
• 12mm Socket 1aau.to/oKV/1AXAA00015
• 14mm Socket 1aau.to/oKV/1AXAA00015
• Ratchet 1aau.to/oVt/1AXAA00016
For More Info visit us at 1aau.to/h/bK7/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 29

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@gabrielfloresjr6465 2 жыл бұрын

Thank you so much for posting your videos they are so helpful !

@benlicona8366 2 жыл бұрын

Absolutely love 1a auto vids, this guy is great too. The FJ is a breeze to work on compared to most vehicles and I actually did my alternator and belt together and was able to sneak everything through the top with no issues, no need to even bother going underneath. Plenty of belt diagrams online too to help with re-routing the new one correctly. Thanks for all the great videos

@jesusuriarte6531 3 ай бұрын

More FJ Cruiser Videos Please! You help me so much THANK YOU

@felixramirez3646 2 жыл бұрын

Changed the Serpentine Belt from the Top. (EZ Pit Zee.) I also replaced the Fan Clutch along with the Fan about 10 days ago. 😎👍

@MRMR-mu4yx 2 жыл бұрын

Thank You for actually showing the tensioner and not pointing to the entire area and saying "there's the tensioner" as other videos do.

@1AAuto 2 жыл бұрын

+MR MR Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@fredisensee5288 4 жыл бұрын

Is there a reason that you took off the rear skid plate?

@michaelrandell4021 Жыл бұрын

Thanks Lenny for all the good help videos. As all Ways Rock Auto "Rocks".

@dancidan Жыл бұрын

Thanks for the posting !

@qatar-hd4709 3 жыл бұрын

Thank you so much for this video 👍👍👍

@1AAuto 3 жыл бұрын

+Q A T A R - H D Thanks for checking us out! 1AAuto.com

@jwwelder07 4 жыл бұрын

What if a mechanic install the wrong size of belt? The belt installed is 7 ribs 21.2 x 6 x 0.9 inch and the recommended size is 7 ribs 20.9 x 0.9 x 0.9, reason asking is my engine had this noise comes out after new installation of the belt. I went to the brand website and found out that the belt installed is for a different year of the same vehicle. I just need help as the noise is come and go and the mechanic wanted me to try to replace a $600 worth cost of tensioner but not sure about the noise cause. Thanks

@bubblebutt4201 4 жыл бұрын

Love your videos Bob Ross of mechanics there super helpful

@tnae12 Жыл бұрын

I have build up all over the big crank and everything what could it be??

@anonanon5843 4 жыл бұрын

Can you do this from the top of the car? Without dropping the plates?

@bowyerdude 4 жыл бұрын

Seriously, most of us don't have an auto lift in our garage.

@Retro64XYZ 4 жыл бұрын

@@bowyerdude I did this on my 2007 FJ Cruiser about 2 weeks ago and I can now confirm that you can do this from the top. I didn't have to remove anything or jack the vehicle up. I just wiggled the belt off while taking tension off of the belt and then wiggled the new one on and got it all fitted back on.

@QUANTRELLBISHOP 4 жыл бұрын

@@Retro64XYZ how long did it take mine just started making all kinds of noises and it's frayed and hitting things so I need a new one.

@mountainhopper9573 4 жыл бұрын

@@Retro64XYZ me too.

@Fizz826 3 жыл бұрын

You should change it when you change the alternator. The battery and the alternator coming off making this a lot easier.