How to Resin 3D Print Articulating Dragons

Рет қаралды 226,842

2 жыл бұрын

Here is how I use a resin 3D Printer for print in place articulating 3D Printed models that are typically only done on FDM 3D Printers. What settings I typically look at to get them to print properly.
200K Subscriber 3D Printer Giveaway sponsored by Elegoo ➜
Thanks to Elegoo for Sponsoring today's video ➜
Elegoo Saturn ➜ geni.us/ABTdtjm
Elegoo Mars 3 ➜ amzn.to/3CQqkTN
Elegoo Mercury X Bundle ➜ shrsl.com/33ha6
Elegoo Neptune 2 ➜ geni.us/2MWuj
Elegoo Mars 2 Pro ➜ geni.us/erkc
Elegoo Mars ➜ geni.us/GGUV82l
Elegoo Wash & Cure Station ➜ geni.us/hgyLGW
Elegoo ABS Like Resin ➜ geni.us/Lb9kl
Elegoo Washable Grey Resin ➜ geni.us/Ufg4
Print your own Flexible/Articulating 3D Prints!
Articulating Dragon by Mcgybeer
cults3d.com/en/3d-model/game/...
Articulating Slug by Isaiah
www.thingiverse.com/thing:472...
Wham Bam Flexplates save 15% with code UJ2021 ➜ whambam3d.com/collections/acc...
________________________________________________
Interested in other resin 3D Printers?
Peopoly Phenom ➜
www.matterhackers.com/store/l...
Epax X10 ➜
epax3d.com/products/epax-E10?...
Elegoo Mars ➜ amzn.to/2xvAJVr
Anycubic Mono X ➜ geni.us/dmQqQ
________________________________________________
Some Additional Items you will want to consider for Resin 3D Printing ➜
Full List - www.amazon.com/shop/unclejessy
Disposable Gloves - amzn.to/2Xjaxfo
Plastic Spatula - amzn.to/2Ijrhuy
Metal Spatula - amzn.to/2XgiHoS
Isopropyl (IPA) - amzn.to/2KoTsdY
Pickle Container - amzn.to/2KkWsrH
Funnel - amzn.to/2IjrrCa
Paint Filters - amzn.to/2XcpK1V
________________________________________________
Interested in getting a 3D Printer? Here are some that I use ➜
Ender 3 amzn.to/2GcCECB
CR-10 amzn.to/2Id9o1T
CR-10 S4 amzn.to/2UgWMbL
TinyMachines3D.com
www.tinymachines3d.com/?rfsn=...
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoffee.com/UncleJessy
_______________________________________________
Gear I'm Using ➜ www.amazon.com/shop/unclejessy
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
KZfaq ➜ / unclejessy
________________________________________________
Thanks for watching!
SEND STUFF TO ➜
Uncle Jessy
PO BOX 629
25 Goodburlet RD
Henrietta, NY 14467
#3DPrinting #Articulating #Dragons

Пікірлер: 334

@UncleJessy 2 жыл бұрын

You can get that amazing dragon file here by Mcgybeer cults3d.com/en/3d-model/game/articulated-dragon-mcgybeer Anyone else notice my White Eyelashes haha

@lap87 2 жыл бұрын

Uncle, are you going to make a PSA regarding the "airbrushing using resin to smooth prints"? Need videos from the resin giants to make sure it reaches people who might not realize what they're doing/about to do

@bradleyleech1990 2 жыл бұрын

I live in Australia can I enter and if I win I will cover postage. Would love a resin 3d printer . Thanks

@vvsandgaming4648 2 жыл бұрын

How about using Siraya Tech Tenacious to print these?

@vvsandgaming4648 2 жыл бұрын

Soak them in hot water for a few seconds and brush them with a very soft brush to clean any remaining resin off

@crushers67 2 жыл бұрын

Just got it!

@GregAtlas 2 жыл бұрын

Lychee has a over exposure compensation option that is great for prints like this. It will basically shrink the scale of the layers you tell it to so you can still get a strong initial cure to the plate but not have the expanding effect when doing it.

@TheNulloverride 2 жыл бұрын

is that new? I had to spend so much time sanding a print around halloween because of the elephant foot.

@GregAtlas 2 жыл бұрын

@@TheNulloverride it's a few months old now.

@JorenMathews 2 жыл бұрын

Even better. A light off delay at the bottom will mostly eliminate elephant foot.

@salley1518 2 жыл бұрын

What is the feature called or where do we find it? Is it only available in pro?

@davidannett3322 2 жыл бұрын

So what would you set the compensation to? I can;t find any guidance on that setting, I can though on light off delay which has seemed to help some

@Irokuz1 2 жыл бұрын

Thank you so much Jessy all of your videos have taught me so much about resin 3d printing. I am getting my self the Elegoo Mars 2 Pro and this will be my first adventure into 3d printing and I cant wait to make these!

@vipercanada 2 жыл бұрын

I just wanted to add some more settings that work perfect when printing this. I am still using the Mars 2 Pro and this time used the Elegoo ABS like mint green resin. I did 4 bottom layers, bottom exposure 25 sec and exposure 2.5, layer height .05. This one turned out even better than my one I mentioned in a previous post as the legs move better. Hope this helps. Again the freezer trick helped it to almost fall off the plate once done.,

@jonhammersley5593 2 жыл бұрын

Thanks for this one, I'd been avoiding trying to print one of these and with your help got it on the second attempt (bottom layer number and time increase was the answer I needed).

@deviles 2 жыл бұрын

Hey Uncle Jessy, i love your vids, they are really inspiring and informative. When you do such presentation videos of some cool stupp, could you post your final settings that got it working fine? I would probably help a lot of people not going through a couple testprints and take up much of that printing time.

@earnellnewman 2 жыл бұрын

Just got a mars 2 pro because of your videos this dragon was my very first print and it came out perfectly with the default settings. Not to sure how to tweak the exposed settings as of yet but I'll get there without a doubt. Thanks for the content and tips always 🙏🏽. Such a fun hobby

@photoboyjet 2 жыл бұрын

I just printed this file on my Elegoo Saturn, scaled to 80% and sliced in Chitubox. I just accepted the default settings and everything went perfectly, first try. After watching the video, I decided to use a single edged razor to carefully remove the thinner sections of the tail and the feet from the build plate. I printed the whiskers with thin supports as I was a bit leery about getting them off the build plate without breaking. Printed with no problems. All dragon's joints work perfectly.

@BombaMyte 2 жыл бұрын

I printed the dragon at 50% scale on an Ender-3 Pro this evening in slightly unfavorable conditions. Minus some brim trimming, it came out great; don't hate on the brim! I originally *wasn't* going to try this, because I haven't been able to complete ANY functional print in months. Thanks to your enthusiasm (and laughing at your own failures), I gained the confidence to simply TRY. Gotta thank you for that, and to ask that you keep doing what you're doing; makers like me appreciate it. 👍🏾👊🏾

@Colleenispunk 2 жыл бұрын

You channel is AWSOME!! And I just found it yesterday! The things you do are crazy cool!!

@DroneSkinz 2 жыл бұрын

Thanks UnkJessie for this clip. I've been looking for a video like this for a minute and you didn't disappoint sir. Thanks for sharing this helpful and easy to understand video. You're da man!😉👍🏽

@jbingbong 2 жыл бұрын

Thanks to you I sprung for the Elegoo Neptune 2S and aside from some bed adhesion issues I've been having a great time 🥰

@davidmpazmino 2 жыл бұрын

On my anycubic mono 4k I printed it flawlessly on my 2nd attempt at 45% scale or so. I love it so much, when I saw your post on it the other day I had to print it myself!

@jwcin3d 2 жыл бұрын

what settings you used?

@ToadM16 2 жыл бұрын

Also have a mono 4K and am curious on settings

@manuelcarrera306 2 жыл бұрын

I just was looking for this, thanks 👍🏻

@TheDevlshOne 2 жыл бұрын

BTW.. this is the ONLY 3d printing channel I am subscribed to. Yours is the best.

@ScoobyDoobyDoo-me9bh 2 ай бұрын

Those are so amazing! I have always wished to have a 3-D printer, so it has been such a pleasure watching what you can do.

@Crits-Crafts 2 жыл бұрын

i love that where a normal print pops off these flex with the plate

@rasplundjr 3 ай бұрын

Just the video I've been looking for, Thank you

@edwinirizarry9277 2 жыл бұрын

I’m so gna buy that file that’s the most amazingly beautiful articulated thing I’ve seen yet

@petergammon4458 2 жыл бұрын

Haha was sitting at the start of vid questioning why you hadnt done them on a flex plate XD Glad to see them in action at the end. Been a life saver for me.

@ThaDeeMon 2 жыл бұрын

This is very printable on a resin printer. Managed to do it first time on my Mono X at 80% scale with 40 second initial, 2 seconds after with a mix of old resin dregs. Printed it on a cheapy knock-off brand magnetic build plate and Bobs your uncle. Great model.. Thanks MCGYBEER for an awesome model and thanks Uncle Jessy for showing us how.

@SirTonyChaos 2 жыл бұрын

Bought the Mars 2 Pro on your suggestion and I love it so far! Would you be willing to share your settings for the Mars 2 Pro so I can avoid wasting time and resin? 😂 Love your videos! Super hyped for every video that pops up so please keep them coming!

@vipercanada 2 жыл бұрын

I just posted my settings here which works perfect on the Mars 2 Pro. Took 3 tries but now perfect everytime.

@tobyhall8198 2 жыл бұрын

3d printing looks awesome,I can't wait til I purchase one for minis,again looks awesome!!!

@kilerrabit313 2 жыл бұрын

A couple of "fixes" for this particular print was with the use of an artist palette knife and a dental flosser. My first print (I have a resin printer) directly on the build plate came out perfect but I broke it due to the pressure of the normal beveled putty knife putting too much pressure on the joints. That's where the palette knife came into play because it allowed me to apply pressure to each individual joints. I started at the head and worked my way to the tail and came off flawlessly. Then I used the dental flosser to clean each of the joints for those hard-to-reach areas. Props to my sister-in-law for the palette knife idea and my wife for the dental flosser idea. My idea? I ordered a wham bam for my mighty and an anycubic wash and cure plus. For those who are not ready to invest in a wash and cure station, these are not bad tools to pick up due to the palette knife being $7 bucks on amazon and the dental flosser being around $70. Awesome video as always. Props to you because I watched your videos prior to getting my printer so I would be aptly prepared when it finally arrived. Harbor Freight is now my go-to place to get my printing supplies. Now if they would only sell resin...

@PrintThatBoii 2 жыл бұрын

Awesome! I wanted to print this on my new resin printer(I’m new to this) but I didn’t know how to start 😂 now I do, thanks!

@Hooverdreng 2 жыл бұрын

The bottom exposure problem can be pretty much solved with the UV Tools software. You can erode the images of the bottom layers until it more or less matches and cancels the elephant's foot.

@metomwhou 2 жыл бұрын

Can you share the settings that you used for the both the dragons and the slugs?

@KSClaw 2 жыл бұрын

My brother in law got me one of these for Christmas :) It's a beautiful dark blue and I'm so happy

@l.r.designstudioslauriesul8993 2 жыл бұрын

I really enjoy your videos :) thank you

@Filiaris1 2 жыл бұрын

Was going to do it, so thank you for this vid

@crushers67 2 жыл бұрын

Lookiing forward to getting into resin printing soon!

@3DJapan 2 жыл бұрын

Agree about the room temp. In the summer I work in my garage but I can't use resin printers in there after the weather gets colder. I actually move the printer into my kitchen and keep it under the table.

@loveiswaytruthlife995 2 жыл бұрын

I bought elgoo neptune 2s because of your videos. Bought for my family for Christmas.

@zacharylast5289 2 жыл бұрын

love your vids ...keep em coming

@TheDoliack 2 жыл бұрын

That’s really cool. I had to sell my filament printer because we moved and I was planning on eventually replacing it with a resin. I’m learning a lot with all these videos. Too bad I don’t have anything to test them on yet.

@nunyabusiness9043NunyaBiz 2 жыл бұрын

Wow! Beautiful prints, with so many ways to pose them as decorative gifts. And then there are incalculably many ways to apply your tips to other types of articulated figures. One thing I thought of but probably is not plausible: Could we clean prints on the plate and cure them in place with a UV light?

@Yamanoochi 2 жыл бұрын

Great work! Keep it going!

@casualreefkeeping 9 ай бұрын

Of course i found this video after i printed it on the creality halot one i got last week. I used elegoo abs like translucent red, and it came out spectacularly. Using supports and a flexible plate made it super easy to remove. I forgot to take note of the scale size, i had auto scaled it down to fit on the bed.

@arreisau 2 жыл бұрын

Haven't seen many people including the whiskers/stache when printing these in resin. MIght be because printing the stache on the build plate direct flattens it. I found scaling the stache to 95% of the dragon scale, and putting it on supports made it keep its shape and fit better into the stache holes on the snout (before curing). (Printed the dragon itself directly on the plate.)

@GeorgMierau Жыл бұрын

I wasn't sure if the model made for FDM will work for MSLA as well, so I've printed it on my Mars 3 Pro at 50% scale with some additional supports added in Lychee Slicer. Two of the smaller segments of the tail seem to stuck and I also had to widen the sockets for the mustache a bit, but overall it turned out perfectly fine!

@solardile7143 2 жыл бұрын

In lychee, you can create a Mesh Raft with the pro version. This mesh raft means you can easily detach from the build plate without damaging the print, and then peel off the raft EZ PZ !!!

@UncleJessy 2 жыл бұрын

Oh damn! Going to look that up tonight!

@craigbossard399 2 жыл бұрын

@@UncleJessy I really want to know more about this!

@proxlamuz4591 2 жыл бұрын

Shame Lychee doesn't have a one time purchase for the pro. Monthly fees... no thank you

@solardile7143 2 жыл бұрын

@@proxlamuz4591 you can always subscribe for a month and then cancel it. Doesn’t cost much

@HEMASimian 2 жыл бұрын

@@proxlamuz4591 or you can pay for the year for the cost of a coffee a month, and support competent developers for their work.

@vipercanada 2 жыл бұрын

Did I miss something. I was waiting for the final settings you used as I have the Mars 2 pro and already have the dragon stl file. Would save us a lot of trial and error if you could share what the final exposure settings were. Thanks

@AngelaSmith_1970 2 жыл бұрын

I just found your channel and I’m learning so much, thank you, you’re awesome 😎🙏🏽🙌🏽

@UncleJessy 2 жыл бұрын

Awesome to hear! Thanks for checkingout the videos! Glad to hear they are helping!

@Oso68710 2 жыл бұрын

What was the bottom exposure time you used for the grey resin to print the dragon? I have mine set to 60s as per instructions on the bottle and mine are fused together?

@jamstok 2 жыл бұрын

Omg.. i did not know about flex plates!!!! You have no idea how happy you just made me! Tis the only thing that really made resin printing annoying, now Thats fixed. Thx

@SchwettyBawls 2 жыл бұрын

About to attempt this on my Mars 2 non-Pro. What bottom exposure did you end up using on the Pro? It would be the same for the non-Pro since the only difference is green and a few z-axis mm.

@jamesdunn581 2 жыл бұрын

Oh man.... I would love a Saturn. (ha) I'm deff. going to try this for Christmas! Thanks!

@kimzaffino3116 2 жыл бұрын

Thanks for the 'freezer tip' This will come in handy. Also touching on the room temp was a great reminder. I learn so much from your videos - Thank you.

@saruichiban 2 жыл бұрын

I love this dragon, on my Mono SE I think the fit to plate put it at 47%. I always have issues with the legs fusing but the rest of it is fine.

@jamesb4693 2 жыл бұрын

I was so hoping you would have listed your settings for the Mars 2 pro

@melaza77 2 жыл бұрын

@Uncle Jessy Would you mind sharing the settings you used for the mars 2 pro?

@Sycoinc 2 жыл бұрын

Printed a few designs out, had majority fail in some way or not be 100% working, takes getting use to them to dial in to print them.... found a little bigger for smaller ones it tends to work better for me

@painter4lifenyc909 2 жыл бұрын

Most likely room temperature also in NYC just had an issue from temp. I am loving the Saturn.

@jaysonchange 2 жыл бұрын

Hey Uncle Jessy! I'm about to buy the Photon mono X and I'm wondering if the Epax hard and tough resin is good with it? Thanks!

@invdr_zimm8692 7 ай бұрын

Im having decent success with printing smaller scaled version on my elegoo Saturn but want to make a bigger one, any advice on if angling the 3D file to fit in the box and using auto supports would work?

@janc3845 2 жыл бұрын

What settings did you use for printing the dragon on your Neptune 2S? My attempts using PLA keep releasing after a few layers. I am definitely a novice.

@sweeeenay 2 жыл бұрын

Do you need the Z-stop thing with the flex plate on the Mars 2? I was looking at getting one and I'm not sure why this is such a roadblock for me but can't you just re-level the bed?

@Tyrinath 2 жыл бұрын

The floppiness makes these things strangely adorable, noodle dragons!

@johnnyyang5349 2 жыл бұрын

These are so darn cool

@meboo2ichi896 4 ай бұрын

Would getting the magnetic flex build plate help at all? I mean you break prints a lot less for sure! I’ve never done print in place.

@momobun. 2 жыл бұрын

The slugs are so cute! Those are the ones I want to print.

@tesseracht 2 жыл бұрын

I printed one of these up the other day in my Mono X, unfortunately the tip of the tail snapped off in the wash station. Definitely going to re-do it.

@UncleJessy 2 жыл бұрын

ouch, yeah i have broken off a bunch of tails doing just that

@mariamorales8503 Жыл бұрын

i have a 3d printer of filament and i print the dragon but some parts are stiff and how is all the parts moving when you take it off please tell me

@tabathasteele7547 2 жыл бұрын

Those are awesome!

@NeoIsrafil 2 жыл бұрын

I've been planning to do one of these at some point...lol. reminded me. Guess I'll do it now. Also OMG I REALLY want a saturn...

@lastlight05 2 жыл бұрын

My first shot came out great except for one leg not being supported correctly and the very end of the tail being kinda stiff. Proxima 6 at 49% with auto supports plus a few of my own. Gonna tweak my settings a little for round 2.

@nseckinoral 2 жыл бұрын

Saw this on reddit before but I didn't want to waste resin because I thought it would require tons of trial/error with a resin printer. Your video encouraged me this morning. I bit the bullet and I somehow managed to get it right on first try :') Apparently my settings are quite dialed in 🤓 Thank you!

@evilparadigm 2 жыл бұрын

Took me 3 tries and what I learned is helping me print minies better than before.

@TallGiantOx 2 жыл бұрын

I have a mars 3 and for the life of me cannot find a magnetic build plate. Where did you get yours?

@dcsechrest 2 жыл бұрын

What settings did you use on your saturn to print this?

@sysop224 2 жыл бұрын

Uncle Jessy, what colour is that blue/green? It's beautiful - I want to make one of these and I'd like to use that colour. Thank you :-)

@bellyhold Жыл бұрын

I'm new to resin printing... I can't find a ton of info on how to properly dispose of your dirty IPA/wash water. Any advice you can provide?

@azamatbagatov7486 2 жыл бұрын

Hey Jessy, Can you do more vids on the Neptune 2s?

@DCReviews4 2 жыл бұрын

That Haslab Sentinel highlights the major reason I love your channel! I love seeing my interests overlap! But I do have an overall question for anyone who can help, I work on the road so I live out of a RV would it be possible at all to get any kind of 3D printer in something as unstable as an RV even though I stay in place for months at a time?

@littleloner1159 2 жыл бұрын

I'm no expert, and I have no clue about resin printing But if you're not printing while driving i know you for sure can have a printer in your RV One of the members of Hak5 (i think it was glitch) also lived in his RV for a while, 3D printer included

@Peter_B_Parker882 Жыл бұрын

What type of resin are you using I love the color I use ellegoo but I feel the colors aren't as cool

@perrinconsolati3455 2 жыл бұрын

I'm new to 3d printing. Im also a new subscriber and will be watching many more videos from you. Im looking for a good place to get started and learn as much as i can tutorials and such. So once my printer is here next week im more educated. Thank you for any help

@geauxracerx 2 жыл бұрын

Man I thought my Saturns were gunked up. That Mars puts mine to shame Anyway print in place in resin has been on my mind for the past two weeks. Awesome video again as always Flexible build plates would solve the getting it off without breaking (spoke too soon😂). Love the WhamBams for resin💙

@C.M.M. 2 жыл бұрын

what is a good bottom exposure and exposure time?

@XLAMitchell 2 жыл бұрын

What were the settings that you used for the print?

@ToadallyTrevor 2 жыл бұрын

As someone new to resin 3d printing do you have a recommendation for settings for (exposure time, lift distance/speed, bottom exposure time) etc? Somewhere for me to start! Great video, love the work you're doing!

@solardile7143 2 жыл бұрын

Entirely depends on what printer you have. Every printer has different settings due to a different LED array, screen type, etc.

@ToadallyTrevor 2 жыл бұрын

@@solardile7143 Interesting, I am using the Elegoo Mars 2 (green) I guess I should have specified thank you!

@RamiYazgai 2 жыл бұрын

Hi I bought the articulated dragon after I saw your video to use it as a test for my new anycubic photon m3 plus I bought two m3 plus I try all kinds of resin exposure tests and everything was working perfectly even the smallest details but every time I try to print the articulated dragon on both 3-D printer the stash always fail . Did you have this issue what was your exposure setting .

@Keseleth 2 жыл бұрын

I am curious about that flexible plate, do you need to readjust printer's height, axis etc. settings to use it or it doesn't really make that much of a difference to do so?

@camdavbax 2 жыл бұрын

You just relevel your plate. It will be 'further up' on the z axis but makes no difference to your settings. Love my flex plates

@sweetbee52 2 жыл бұрын

Oh would I love to print one of those in transparent green, orange or red.

@chino1moreno 2 жыл бұрын

ohhh my gosh the sentinel! in the background!

@Donovarcotfw 2 жыл бұрын

Always printed these guys with a couple of mm support for removal purposes, but the end 6 or so tail joints do fuse up on me. Guessing drop a second or so on exposure. 50% stock settings on photon mono

@IndustrialJones 2 жыл бұрын

Print success! Printed on an Elegoo Mars 2 (non-pro). Sliced in Chitubox; exposure time - 3.5; lift distance - 5; lift speed - 80; bottom exposure - 45; layer height - .05; retract speed 210. 55% scale. Used Siraya Tech Fast Navy Grey. It took 1 hour 36 minutes. Full articulation.

@vipercanada 2 жыл бұрын

Just what ì was looking for. Thanks

@davids5400 2 жыл бұрын

Looking forward to printing one of these! Are articulating prints/files common in resin printing or relatively new?

@UncleJessy 2 жыл бұрын

Not very common. I dont really think I saw any before I posted about the slug back in July but I'm sure some folks must have tried it

@sweeeenay 2 жыл бұрын

I've been able to print a handful of print-in-place articulating files on my Mars 2. The Flexi Rex is fantastic, and there's a Flexi shark that's also really nice. The Milli also works well. Some of the other ones I didn't enjoy as much, unsure if because resin or because the models were just lacking.

@bombard3d 2 жыл бұрын

I think you'll find that using the plastic spatula allows you to be a little rougher with the sliding ram technique of removing prints, which has been more successful in my experience without a flex plate.

@comkver Жыл бұрын

Where'd you get that temperature display?

@KurtKn1sp3l 2 жыл бұрын

I just saw your video about the Wham Bam Flex plates and I am wondering, what happened to them?

@scottfarrell3790 Ай бұрын

Any suggestions as to what resin to use to improve chances of success. I wanted to attempt with the Siraya tech blu - emerald blue I have. If there is a better option please let me know

@DevineDarkness 2 жыл бұрын

I was just thinking about the freeze before you mentioned it xD I've been lucky to only need 10 minutes in the freezer when printing on plate thankfully

@Sky_the_fairy123 Ай бұрын

One of my friends gave me a 3-D cool leaf dragon and it’s very beautiful. I’ll try and get another one so I can show all of y’all.

@Practical3DP 2 жыл бұрын

Did Hitry send you their Rocket1? They said they did. Looking forward to seeing you use it if so.

@tabathasteele7547 2 жыл бұрын

What about an Elegoo Mars3? Also what resin is best to use for these?

@MrAlden87 4 ай бұрын

Is this where one of those removable flexible build plates would come into place?

@3DMusketeers 2 жыл бұрын

OOOOH that rainbow filament in the intro was AMAZING, who makes it???? Temperature matters so much for resin printing! We are working on a solution for it.. Glad to see a flex plate works well! That final shot of you flexing the dragon off, I want someone to do that to my back LOL

@UncleJessy 2 жыл бұрын

That Rainbow was zyltech's and it's dang nice. i believe that was their silk PLA. hahaha flex plate back cracking

@3DMusketeers 2 жыл бұрын

@@UncleJessy Awesome! Next time I place an order I will have to get some! Just loaded up on Printed Solid so it may be a while. That Black Friday sale was too good.

@gnicol9992 2 жыл бұрын

I just need to find a way to buy a wambam plate for the Mars 3 that delivers to the UK.

@caseychadsalvador 2 жыл бұрын

Successfully Printed 2 Dragons with no issues and with perfect articulation!

@steadman_walking2866 2 жыл бұрын

I use supports on these and it works so much better

@jestermarcos 2 жыл бұрын

Do you sharp your spatula until it is razor sharp? All the videos that I see people alwayz have to use some force to take out the prints from the build plate, but with my razor sharp spatula and a low angle I can remove any print with almost zero effort. I don't need to wack it, jest gently push until the spatula get underneath the print.