How to use a Kenmore sewing machine for beginners

Рет қаралды 155,740

Күн бұрын

Sewing Machine parts on my website
sewingmachinetipsntricks.com/
Kenmore Parts at Sewing Parts Online
Enter your Kenmore model number
shrsl.com/4fhuu
Timestamp
00:10 Introduction
01:15 Threading components
02:05 Take-up lever
02:51 Tension discs
03:30 Threading a Sears Kenmore sewing machine
06:54 Sewing machine components & operation
07:00 Presser foot tension and adjustment
09:38 Thread tension adjustment
12:35 Stitch selection
16:52 Feed dogs drop lever and power switch
17:34 Sewing machine care maintenance and small repair guide
18:02 Winding a bobbin
20:50 Threading a bobbin
22:32 Loading the bobbin case
23:40 Pulling up the lower thread
23:56 Straight stitch
25:15 Zigzag stitch
26:48 Specialty stitch
28:17 Reverse
In this video I cover the Sears Kenmore sewing machine model 158.14300 threading and operation.
This is one of their more simple Kenmore sewing machines and goes not take any discs, but does have eleven different stitch patterns including specialty or decorative stitches.
I cover how to thread a Sears Kenmore sewing machine and problems to be careful of, the components and their operation on a Kenmore sewing machine. How to adjust the thread tension, presser foot tension control, the stitch selector knob and how to properly select stitches, feed dog operation, and power switch.
I also go over how to wind a bobbin on a Sears Kenmore sewing machine, how to thread a bobbin, loading a bobbin, pulling up the bobbin thread and checking the bobbin tension on a Sears Kenmore sewing machine model 158 series.
I show how to work a Sears Kenmore sewing machine and the basic operation including strait stitch, zigzag, specialty stitch patterns and reverse. These are one of the great work horses of the sewing machine industry.
Most of the Sears Kenmore sewing machines of the 70's had an enclosed motor sitting in the bottom of the sewing machine. They used a two belt drive system with a power pulley between the belts increasing both power and torque on these machines, making them some of the strongest sewing machines of the time.
The Kenmore sewing machines have an odd numbering system for their models. The first 3 numbers denote the series of the machine followed by a period with several more numbers for the actual model number. When looking for parts, manuals or information in general on any Sears Kenmore sewing machine, it is recommended to use the full model number including the series and period in the beginning to ensure you get the correct parts and information for your machine.
Thank you for watching my video on the Sears Kenmore sewing machine 158 series. If you have any questions please put them in the comments and I will answer them as soon as possible.
---------------------------------------------------------------------------------------------------------------------------------
Thank you for watching our videos, by purchasing through any of the following links you help to support our channel through either direct sales or affiliate sales which we get a small commission.
These are tools I use and recommend for their durability and ease to load up and take on a service call.
Workbench Light
2200 Lumen LED light with 10X magnifying glass, 28 inch adjustable arm, and table clamp
amzn.to/3GV9OqE
Titan 50 piece torsion impact bit set
amzn.to/3GXUidW
Titan 148 piece bit set
amzn.to/3iwygFA
Titan 53 piece 1/4 inch drive impact socket set SEA and Metric
amzn.to/3vVk7oA
Milwaukee 8 piece screwdriver set
amzn.to/3GyB5Od
Rigid 2.0 Pro Gear System, 3 tool boxes on wheels
amzn.to/3X3i9OS
Rigid 18V 1/2 in. Drill/ and Impact Driver Combo Kit
amzn.to/3QxhH94
This prybar kit is invaluable for opening this machine.
amzn.to/35lKBlS
---------------------------------------------------------------------------------------
Square
I use this for local billing and invoicing in my local business
squareup.com/i/OSMPROCESS
----------------------------------------------------------------------------------------------
Contribute to the cause.
If you would like to support the channel but have no need for any of the above products you can send a contribution to me through Square
square.link/u/6oSrQ5IM
Thank you and have a blessed day!

Пікірлер: 986

@jeffnagel7467 2 ай бұрын

Great tutorial. I purchased a 1969 Sears Kenmore model 158.16011 off of CL for $10 !. It had a box full of cams and all of the original equipment. I have never used a sewing machine before, but after studying your video, I was able to repair the hems on my boat seat covers in one day! My wife was in awe, LOL. Thank you for taking the time to do the video and share it.

@sewingmachinetipsandtricks9079 2 ай бұрын

That is awesome!! I am happy to have been able to help. Thank you for sharing!!

@nanamona6386 2 жыл бұрын

Hi Richard, I just found you. My machine is a Kenmore 158.1941. Got it in 1976, Christmas gift, Maybe 20 hrs on it, Finally took it out of hiding and got it serviced last month. I am not a sewer, but am willing to try after seeing you video, I going to watch the videos and learn Thank you so much for questions I had.

@SandraYavorcik 2 күн бұрын

I’ve been sewing most of my life, but you taught me some new information. Love tools and how they work

@sewingmachinetipsandtricks9079 2 күн бұрын

@@SandraYavorcik I am happy I was able to help.🙂

@barbarasmith1888 Ай бұрын

Thank You. The best explanation of this machine I have watched.

@Chris-pb5jm Жыл бұрын

I picked up a kenmore 158.15150 for 15$ with table at an estate sale about 15 years ago. Mom was a seamstress her whole work life, so i knew what it was. First thing was it wasn't plastic! I'm 49 and my 9 year old wants to sew. Sew we are learning together. Thanks for the tutorial!

@amaliagelizondo2672 Жыл бұрын

Hi could you explain me what's means feed the dog ?? Thank you !!!!

@LynneKnits 16 күн бұрын

I picked up a Sears Kenmore 158 series on the weekend. I got it at a garage sale, in a sewing desk for $10 (Cdn). It even had the English and French manuals 😊. This tutorial has been invaluable.

@markjohnson7477 Ай бұрын

good teacher, very basic and straight forward thank you sir I learned allot.

@kagy9 3 жыл бұрын

I inherited a similar Kenmore sewing machine from my mom when she passed away in 2007. I never learned to use it until this year with covid-19 face masks. This video showed me some of the amazing options this particular machine has and I am eternally grateful. I especially appreciated that your instruction was geared toward the beginner and you gave us time to watch and learn. Thank you so much and I will be following you

@Curiousmz1 3 жыл бұрын

Interesting we both inherited our machine in 2007 and just now wanting to learn to use them!

@sewingmachinetipsandtricks9079 3 жыл бұрын

You are very welcome. Thank you!

@jenny_lee_87 3 жыл бұрын

I just inherited a similar one and am learning, definitely will watch this video. Thank you

@thedragonfly6081 2 жыл бұрын

@@sewingmachinetipsandtricks9079 i inherited a Kenmore 158 and I am having trouble with the feed. I can not get the materials to feed at all . Is there an adjustment somewhere?

@sewingmachinetipsandtricks9079 2 жыл бұрын

@@thedragonfly6081 There are several reasons that can happen. First pull the needle plate and ensure there is no lint build up between the feed dog teeth. If that does not fix the problem, with the needle plate on, make sure the stitch length is set to its longest stich and the presser foot up.. Turn the handwheel and ensure the feed dogs come up through the needle plate, move all the way to the back then go down under the needle plate move forward again and back up.

@alicemills5449 3 жыл бұрын

Although I have a different Kenmore model, I learned so much. I was watching to fix my bobbin holder and then continued learning about stitch sizes and tension. Thank you so much.

@ashatheartist2642 3 ай бұрын

Dude! I cannot thank you enough for this video. I found this beautiful sewing machine at a thrift store and needed it for a project, but I had no idea how to work it. You are clutch, and you're a great explainer as well. Thank you for this video!

@DorothyRodela 8 күн бұрын

I was gifted this beautiful machine. I love it but I cannot get it to run The motor runs ,the light turns on but the needle does not go up and down. The motor just spins. The belt is good but I cannot get the arms to move up and down. HELP.

@rebawasswass3716 2 жыл бұрын

Just bought a vintage Sears Kenmore sewing machine and I just love it. This video has helped a lot. Thank you!

@ms.bitch0157 Жыл бұрын

I hv a 1977 model 158.18150 & I'm super excited to see this video! I want to know everything! I've never had a Kenmore! So, this is gold!! Thanks!

@stephanywilkes3598 3 жыл бұрын

Thank you for taking the time to do this, and for the close-ups. I inherited a slightly earlier edition of this Kenmore from my mother-in-law. Whenever I haven't used it in a while, I forget how to do the thread tensioning and little spring clip properly, and how to do the bobbin and shuttle thread bit the right way. Terrific, helpful video.

@ElizabethMartinez-ee4hv 3 жыл бұрын

Thank you so much for this video, great explanation. Very easy to understand. You helped me a bunch. I have had my machine for more than a year and have been so intimidated by it that I never even tried to use it. so happy I found your video.

@mindykubiak9907 3 жыл бұрын

This was so helpful! I bought a kenmore 158.17740 a couple of years ago that I had yet to master. I will definitely be referencing this video again. Thank you!

@jenniferprettyhairhudson568 2 жыл бұрын

This video was so helpful. I had this sewing machine for 2yrs. I feel confident trying to thread my machine and do my projects

@allisonprzybysz 3 жыл бұрын

Thank you so much for making this video. I have a Kenmore model 54, which I have never used until today. Thanks to this helpful video; I created a throw pillow!

@bonniegrace6497 Жыл бұрын

Thanks

@joseherrera-valdes974 3 жыл бұрын

I’m very new, , less then a week, I own a 158 13500, Kenmore 10 Stitch, your vídeo have been very helpful, Thanks

@microwavedsalad893 3 жыл бұрын

I have a model 158.13571, it took me several month but i think i finally got it lol. This video was super helpful for me. It helped me learn about some functions I didn't know it could do, thank you

@Thirtymark Жыл бұрын

Thanks for this guide! I picked up a used Kenmore 158.132 in great condition for cheap recently and this helped me a lot.

@bethturner6529 Жыл бұрын

Thank you for making this video. I inherited my grandmother’s sewing machine, model 158.4301 recently. She passed years ago but I remember learning to sew on this machine as a kid. I needed a refresher on how to use the machine. This is so helpful!

@user-yn6vi5ce5c 11 ай бұрын

😊😊

@mgwms 3 жыл бұрын

This video was a godsend! I’ve had the same machine for almost 40 years and never really learned how to use it! Thanks to your video I was able to correct an issue I feared meant the end of my machine! THANK YOU!!

@sewingmachinetipsandtricks9079 3 жыл бұрын

You are very welcome! Thank you!

@yanisamson1678 2 жыл бұрын

@@sewingmachinetipsandtricks9079 bb

@KN-cu7lr 3 жыл бұрын

Very clear information, thank you! I finally threaded this sewing machine that's been sitting in the corner of my room.

@shepjudy 9 ай бұрын

Thank you for this video...I just obtained a Kenmore model No. 17850 so this was very helpful for me. I appreciate your patience in explaining everything.

@kenthompson7985 3 жыл бұрын

I have a model 1430 that I bought new in 1976. It is still like new as it has seen very little use. I decided that I should learn how to use it and your video was just what I needed, very clear and to the point. I tried a few test stitches without any problems. Thanks for the great video, I'll comment again after I use it for awhile.

@sewingmachinetipsandtricks9079 3 жыл бұрын

Hello Ken, You are very welcome! Thank you for your awesome comment I appreciate it!

@kenthompson7985 Жыл бұрын

@@sewingmachinetipsandtricks9079 A year later I'm still hemming my own jeans and doing patches. Not great at doing it but it works for me. Thanks again for the great video.

@sewingmachinetipsandtricks9079 Жыл бұрын

@@kenthompson7985 You are very welcome! Thank you, I appreciate the comment.

@tryzz8 3 жыл бұрын

thank you, I just got this machine. and this was most helpfull. I am going through all your videos. : )

@sewingmachinetipsandtricks9079 3 жыл бұрын

Thank you and your welcome!!

@claudiaegongora3216 3 жыл бұрын

@@sewingmachinetipsandtricks9079

@katopia176 Жыл бұрын

thank you so much for the close up shots and patience!! i just bought a secondhand kenmore because i want to learn to make a tshirt. ive never taken a class in my life but im determined to learn!

@juniormorgan7458 3 жыл бұрын

I have a Kenmore 158.1755. Great machine. Use it to sew multiple layers of Sunbrella making things for my sailboat, as well as duffel bags, computer case, etc.

@nicolejunkin3662 Жыл бұрын

My mom gave me my machine. I remember her making so many things on this machine when I was in school. She made quilts, pillows, quilted jackets and vests. My model no. is 19412. I stopped the video at 8:16 to go be in front of the machine. I've already learned a couple things. Thank you!

@Mrs2ne1lovesme 3 жыл бұрын

I have the EXACT same Kenmore machine as you! I was lucky enough to find it at a thrift for super cheap and I'm glad I found your video on how to use it, because I really didn't know what I was doing lol Anyway thanks so much for this video! Also, do you know where I can find more feet for this specific machine? Mine only came with a foot that's only suitable for straight stitch.

@sewingmachinetipsandtricks9079 3 жыл бұрын

Hello Claud9, How are you doing? You are very welcome! Thank you for watching the video, I appreciate it!! That is awesome you found the machine in a thrift store, these old Kenmore machine are still some of the best machines available. You can get an eleven piece snap on foot set for this machine on sale for $12.00 here eb4.co/Lowshankfeet If you don't find what your looking for you can also search Ebay for Kenmore low shank feet or Kenmore 158.14300 here ebay.us/CH2HSp Let me know if you need anything else.

@1muddonna 3 жыл бұрын

I just bought a second-hand Kenmore 16524. This video was simple to understand and helpful-thank you!

@sewingmachinetipsandtricks9079 3 жыл бұрын

Your very welcome! Thank you!!

@lizmeyer8555 3 жыл бұрын

Thanks so much for the great tutorial! I inherited a Kenmore 158.14305 from a friend and am relearning how to sew. I learned 50+ years ago on a Necci and wasn't sure how to thread a Kenmore. Your video was so helpful! I am a fan!

@paulstintzi4788 Жыл бұрын

Hi Richard. I acquired a 158.19411 Kenmore as my first sewing machine and am working on learning how to use it. It was free so there's always the looming (not a pun) feeling that there's something wrong with it, but I think the problems are mostly with me. You make it look very easy here and this video is the best on KZfaq for this machine, the only thing I had to look up in another video was how to pull the bottom thread up, and then I had to learn myself to make sure to route the top thread under the presser foot. One issue I am having is that my top thread is getting caught on the shuttle and the machine is "jamming", is this usually a bobbin tension issue or a top thread tension issue? My bobbin is not original either, as it doesn't fit in the bobbin winder, so could be the problem, do you know the bobbin part number I need? Does winding bobbins by hand lead to issues sewing? Anyway, the machine seems to be working so far, the only thing that seems a bit odd is the top thread tension seems to be pretty tight (but I don't have a frame of reference being new to this). This may be because I am using thicker thread though, or maybe the tension is actually normal. I've threaded it the same as you did here, though this model has slight differences. It would be great to see a video of how you'd sew two pieces of fabric together, like maybe more in depth for the 2 most basic ways and introduce some more technical ways. Thanks for the video!!

@sewingmachinetipsandtricks9079 Жыл бұрын

The thread getting caught on the hook would be the upper thread and will have nothing to do with the bobbin thread. The hook may have a burr on the point or other damage and need to be repaired, or the hook race maybe dirty or sticky and need to be cleaned and lubricated. Make sure you lift the presser foot before threading and the thread is in the tension disc and take up lever. The smaller the stitch the tighter the stitch will be.

@kristincarey1819 3 жыл бұрын

I have a Sears Kenmore 158.17200. I have NO IDEA how to use it, or any sewing machine.I am hoping this video helps! Thank you!

@nessiequin 3 жыл бұрын

This has been the most helpful tutorial I have found so far. I just inherited my grandmother's vintage Kenmore from the 70's and am going to learn machine sewing at age 35. I'm so excited! Thanks again :)

@donnanichols6950 3 жыл бұрын

I just got my Kenmore from my 95 year old friend.I'll be 62 in July. It looks brand new she said she sewed all her life making her children's clothes to drapes etc I can't barely hand sew a button or a hem so I'm lost. I sold some stuff they have me A stand mixer,A beautiful Roasting pot a expensive comforter set but i said this i am keeping an I'm going to learn to sew.Any ideas on what i should attempt first that i can be proud but nothing too overwhelming.Thanks in advance 🥰

@mariewright7175 11 ай бұрын

This video was super helpful to me, thank you!!! I bought a Kenmore model 1595281 from a flea market and had no idea how to use it. I'm gonna be mending my clothes like a pro in no time now!

@dremaperry2900 3 жыл бұрын

I have a Kenmore model 1581786081 and all of the sudden my needle has shifted toward the back of needle plate and is right next to it you can hear it touching it as you sew, can you tell me how to adjust the needle. Thanks

@sewingmachinetipsandtricks9079 3 жыл бұрын

Is the needle close to the presser foot also? If not then the needle plate is probably out of place. If it is just as close to the presser foot then there is an adjustment on top of the needle bar that is probably out and needs to be readjusted. If you need help with it I can send you a link to my Facebook group and help you there.

@dremaperry2900 3 жыл бұрын

@@sewingmachinetipsandtricks9079 yes my needle is just as close to the foot. My model is a Kenmore 158.1786081. Would love any help you can give me. Thanks

@sewingmachinetipsandtricks9079 3 жыл бұрын

@@dremaperry2900 Here is the link to my group. I can better help you over there. will need to post images and such. facebook.com/groups/479747739423131

@KathyKaneAsheville 3 жыл бұрын

I have a sears kenmore sewing machine 158.13031. I can't figure out how to load the bobbin. Thanks for your help.

@retroredo9850 7 ай бұрын

Im glad you said to test exactly on what you are going to sew on like two fabrics because you are sewing seams etc. Ive helped so many people that only set tensions on one layer then didnt know what was going wrong!

@gabrielinton137 2 жыл бұрын

This video helped me so much to get started. I am using a Kenmore 1525. Thank you for this clear and instructive video!

@sewingmachinetipsandtricks9079 2 жыл бұрын

You are very welcome, thank you!!

@67comet 2 жыл бұрын

Got a 158.1561281 from my mom over the weekend. She used it a few times back in the 80's to patch up her car's upholstery and said it should get my started on making some upholstery on my old truck (vinyl, fabric, and a little foam). Looking forward to figuring it out (been decades since I drug anything under a sewing machine). She also fixed my "Tough skins", my sister's clothes, and buttoned up some quilts on occasion, so it should work pretty well. Thank you for making the videos, they're already helpful.

@Majuliehere Жыл бұрын

Your patience to go through is worth a trillions.. Wow..

@adamrice2847 5 ай бұрын

I have a 1970 Kenmore 158.0141 still in it's carry case just love it!

@LIZZIE70374 2 жыл бұрын

I feel very lucky that they gave me this machine in perfect condition, it is like new, I feel lucky!!! Thanks for your video.

@ke2life 3 жыл бұрын

Kenmore 148 1310. 1974 and still ticking! This is a very good video and I have come back to it several times.

@sewingmachinetipsandtricks9079 3 жыл бұрын

Thank you, I appreciate that!!:)

@michelleheimlich 2 жыл бұрын

Thanks so much for these videos! I haven't sewn for years but my kids started sewing pillowcases at church and I gifted them a sewing machine for Christmas so they can do some projects at home!

@sewingmachinetipsandtricks9079 2 жыл бұрын

You are very welcome! That is awesome, everyone should know how to sew.

@Slay_slay13 Жыл бұрын

An older make of this machine was in the mountain cabin we bought years ago and I just now got into quilting & learned what a gem this little machine is!! Thanks for the help with tension- I am so excited that I’ll be able to use, fix and hopefully service & clean my little new best friend 😁 thank you!

@pattybrooks1561 Жыл бұрын

I really love my machine. I want to get into quilting my self. I need to start soon, though. I would first like to make a rag quilt. Don't know how too. Maybe you know a good place to go on you tube. Please let me know if you do.

@joycechong7207 2 жыл бұрын

Just received the 158-10500 and looking forward to viewing your video.

@debbieebbiebobebbie 2 жыл бұрын

I just bought a 158.140 she’s a gorgeous spring green and I know nothing else, lol, so thanks for this!

@brettusmcvet777 2 жыл бұрын

Thank you sir. My grandmother just gifted me her Kenmore 1440. And it’s beautiful! Mint! I’m excited about using it. Just like with a lot of things, they probably don’t make em like they use to.

@genefrazier9632 3 жыл бұрын

Like kagy9, I inherited my mom's machine and just haven't gotten it out to see how it worked. Your video was soooo good. Thank you so very much for making it. It was exactly what I needed. God bless you! You area a special man to take the time to put this together. And It looks like there are are lots of others who appreciate it the same way I do!!

@Trailerpark_pretty 2 жыл бұрын

I always come back to this video! It’s the most informative and helpful guide! Keep making videos 🤩

@keirablackwell 8 ай бұрын

I inherited this machine from my grandmother upon her passing and it is absolutely the best machine I've ever used. Thanks for this video, it walked me through how to properly use this machine the first time. ❤️

@Majuliehere Жыл бұрын

Am so glad I came across your video. Simplest training ever! With ur video, I am able to use my machine well, if not perfect for now. God bless u. Hope u have some new videos on KZfaq

@LynneKnits 16 күн бұрын

I’ve learned so much from this video! Thank you so much for this.

@vintage1331 3 жыл бұрын

I just bought a Kenmore Zig Zag 158.1942. I appreciate your video with clear instructions:) The Owner's manual was confusing and thanks to your video I'm up and sewing now! Many thanks!

@sewingmachinetipsandtricks9079 3 жыл бұрын

You are very welcome!

@diannealesse6101 4 ай бұрын

Hi I just found you. Thank you for a very clear understanding of how to use this machine. I havent used mine in 25 yrs. I feel sick that I dont have any clue till I found your video. I am having issues and I how to see more of your videos. thank you so much for taking the time to do this video . Your the best. I am grateful !!

@kimberleegonsalves6334 2 жыл бұрын

Hi! I just picked up the 158.1625 from Goodwill for $19.99. Thanks for their video!

@pit32s Жыл бұрын

My wife dusted off her 158.13570 heritage wich is in pristine condition but none of us had any idea how to use it. This video is invaluable for us since your model is very similar and had help us more than you can imagine. Thank you sir.

@holleyclark234 9 ай бұрын

Thank you for this video. I inherited a 158 sewing table from 1972. I am new to sweing and just trying to learn using what I have already.

@CJ_Walks 5 ай бұрын

Same! How has it been going?

@jeffreykarsmiski4774 Жыл бұрын

we just borrowed my mother in law’s machine and i pulled this up to help my wife. i also hit subscribe. what a great bit of instruction. to the point without a lot of fluff. thank you

@Allison-qz5yr 10 ай бұрын

This was very helpful! I just got my first sewing machine from a family friend and had no idea what to do with it! Thanks! 🧵🪡✌🏻

@rosaliagiralao4917 3 жыл бұрын

Your video helped me a lot. Now i can get untangled/unmessed -up stitches from my old Kenmore ( i don't even know what model this is). Thank you very much.

@larryamberwhatley4242 2 жыл бұрын

Hi! I inherited my grandmother’s Kenmore 158.10691. It still has the original receipt with it. She bought it January 2, 1980. Very informative video. Thank you!

@sewingmachinetipsandtricks9079 2 жыл бұрын

That is very awesome! They truly are great machines, many people can't see the value in them. You are very welcome! Thank you for watching and commenting.

@Misswyndeewill 3 жыл бұрын

Thank you. I found a kenmore 148.13110 at a Salvation Army for all of $15. Bought a pedal on Amazon for $30. Had to WD40 the entire unit after I darn near burnt/seized the engine...but luckily I have an engineer in the family who fixed my motor. Regardless, I love this machine. Your video was priceless. Now if I can get the gear on the bobbin winder to work as it should I’ll be even happier. Thank goodness for bobbin winders and other machines but your video was very very informative. Thanks again!

@elizabethmoorman7434 Жыл бұрын

I so appreciate his help, my machine is a 1782 convertible, kenmore. Thank you.

@ornenuckols582 2 жыл бұрын

You save my life! My husband buy a machine in a move sale and i been looking for everywhere how use it and nobody explain everything, you help me a lot , im new in this 😊 thank you 🙏

@pianoford 3 жыл бұрын

Best ever tutorial . Thank you. I have a kenmore 1937 . Its a beast workhorse. My upper thread keeps breaking. I think your tutorial advises its too tight. Will refer again to my manual and adjust. Again a big thank you.

@AwakenedOnes2023 9 ай бұрын

Just got gifted a gorgeous 1960s Kenmore model 1249 with amazing stitch capabilities that can handle every type of material even had original accessories such as feet, instructions manual, even the original brushes and needles 😂 is so clean too, I can’t believe this thing says it’s made to handle thick twill leather and denim like a champ! Has stretch stitch and ten stitch styles! I’m in love with it! New plastic machines just don’t twirl my beanie lol! Thanks for your video and other ppl making these videos!

@suzeweaver4937 3 жыл бұрын

Great video!!!! Kenmore 158.17842 & 158.1060. Really Really looking forward to your videos on these & thanks!!!!!

@TrishMeyer99 2 жыл бұрын

Thank you! I just bought a 158.1941 at a garage sale and this was very helpful. Especially the bit where you said that it was normal to see a little of the top thread on the bottom, and vice versa - I thought the thread should meet in the middle so you only saw the top color on top and bottom color on bottom, and was going crazy trying to set the tension on my Singer 201!

@cliftonmcnalley8469 Жыл бұрын

I just watched a video from Vintage Sewing Machine Garage on the 158.1941 last night for the first time. It is an all metal machine with all of the basic bells and whistles - zigzag, stretch stitch, a buttonhole and a free arm. Excellent purchase - I'm jealous.

@rhondaholman9628 Жыл бұрын

I inherited my mother in law's 1802. It is a god- send. I replace zippers in coats & coveralls. SO much easier to do with this machine. Thanks for the video.

@pameladobrick508 2 жыл бұрын

i recently bought this very model at a consignment store for $50....included cabinet and little sewing chair...like grandma used to have. Anyway, when I sat down to use the machine...it was barely working, even though it looked like it had hardly been used. So I pulled some stuff up online and decided to take a look and luckily all it needed was some lubrication and a little cleaning. The dust had built up in side, but still not bad since it was stored in the cabinet. And, after a thorough oil addition to the moving parts, it slowly started working and now is working perfectly. I have referred to your video because I couldn't figure out the stitches and how the little wheel modifiers and dials worked. Thank you for putting this together. I will probably have to refer back to it again...but your explanations were very thorough and helpful about how this particular machine works. It is a solid machine and sooo much better than the cheaper ones on the market.

@preacherman9018 10 ай бұрын

I use the same machine. Thanks for the description of how to properly thread the top disk. I've been using that for the sewing mode too, not just the bobbin winding. One thing I would recommend to the listeners is to get a copy of the users manual for a quick guide on all the stitch functions. It can get confusing otherwise. Have a good day.

@emilyackertrutten3722 9 ай бұрын

Thanks very much for your video - I have a somewhat newer Kenmore (from the late 80s), but your video explained a lot of what was going on with it.

@AliciaVeliz-ub7py 3 ай бұрын

I'm really looking forward on learning how to operate my sewing machine. I can tell not all machines are quite the same but you explain it very clearly.

@caecal2012 8 ай бұрын

I’ve got my great grandmas 158.14300 I loved your video and I’m subscribing so I can find your videos when I get stuck

@Agent_Hanu-Kai 8 ай бұрын

I'm a bit late to your video, but i was at goodwill the other day looking for items to flip. I found two sears kenmore machines that both work! 148.12500 and 158.13033. I've been wanting to make upcycled clothes for awhile now, so here I am! Thanks for making this video!

@amyw1882 3 жыл бұрын

I have the 158.18011 Thankful for this video.

@meaganjennett7576 7 ай бұрын

I appreciate your video so much! I inherited my great grandmothers kenmore just like that only its still in the table! This video helped me learn how to use it

@sewingmachinetipsandtricks9079 7 ай бұрын

That is awesome, I am glad I was able to help you understand how to use your grandmothers machine. Thank you for watching the video.

@Curiousmz1 3 жыл бұрын

THANK YOU! You were very informative on this video. I’ve had a 148.19370 since marrying 2007. It was my mother n laws originally. Sadly I’m 55 yrs. old and just now wanting to learn to see t-shirt dresses for my granddaughter! A friend is helping but this taught me a lot! Thank you!

@christopherkeller5561 3 жыл бұрын

Went out to dinner with an old friend on Inauguration day 2021. Circling the block looking for a parking spot I saw a free sign on a wooden sewing cabinet in pristine condition, sitting on the curb. I already own a BROTHER and a DRESSMAKER that share one cabinet. The one on the curb was a solution to a long-time problem. It also created a new problem. Inside was a 1974 Kenmore that Sears distributor in Canada sold. Model 148-12501 in immaculate condition and looked brand new. It even sounds like it was made last week. Not one scratch and no dust or lint. Now I need to figure out how to reposition the needle, how to set it up for double needle and thread it from a spool to the first element. I already know how to thread it from the tension disk to the needle. Thanks for making your easy to comprehend tutorials.

@r.duroucher225 Жыл бұрын

A fine video. Thank you for taking the trouble to make it and share your knowledge.

@rhondaadams4013 Жыл бұрын

I have my grandmother's old high shank Kenmore model #148 41500 which I'm proud to now own. I'm learning to sew, and love this machine. It comes with the wood table it's attached to, and I believe it's a cast iron bottom. It's so heavy! And it's a beautifully popular 60's olive green color. This is a very good teaching video about the Kenmore! I've learned some things through this video, such as the tension release with the presser foot raised. I wish I'd have found this video months ago!! Mine has no knobs, but rather two different levers for adjustments of stitching. But I want to know how to change the presser foot to another with a different function, and if there are other feet for the high shank vintage Kenmores, such as a roll hem foot. Thanks for the video.

@jenniferchanningrogers5105 3 жыл бұрын

I have a Kenmore Ultra-Stitch 6 model 158.1340281 from my favorite person in the world, my Nana. I want to make everything I can so she can see what I have learned and knows I LOVE this so much!

@user-ie3dh7ro3b 4 ай бұрын

Thank you I don’t think I’ll get it fixed I can’t afford to spend that kind of money a new one cost less than that thank you for answering my question 👍👍

@Kuessemir 7 ай бұрын

I have this exact machine, looks barely used. I found it for $15 in a sewing table and I am trying to learn it. Thank you so much for your help!

@sewingmachinetipsandtricks9079 7 ай бұрын

You are very welcome, Thank you for watching!

@maxinephillips2713 3 жыл бұрын

I just got my moms kenmore 148. She did not have a book. After watching your video, I have it making stitches. Thank u . Now it won’t sew over seams.

@KingTesticus Жыл бұрын

I just inherited a model 148.12070 and it needs some love. I am in the learning and information gathering phase before I attempt to do anything with it.

@PaulHamel Жыл бұрын

I have a Sears Kenmore model number: 5813200. This machine was my mother-in-law's from many years ago. Many thanks for providing us with instructions.

@sewingmachinetipsandtricks9079 Жыл бұрын

Your very welcome, thank you.

@momisalwayswritemediaprodu3491 Жыл бұрын

Thank you this machine was gifted to me by my mother this was so helpful

@babblingbooks2839 4 ай бұрын

I inherited a 60’s Kenmore machine from my husbands grandmother and I have been at a loss on how to use it. Thank you so much for this video!!!

@julielawler4070 6 ай бұрын

I have a model 158.1262180, I have had it for a long time without using it. I am wanting to learn to use it now!

@528hzav9 3 жыл бұрын

Kenmore 158. 19461 Thrift store find 29.98. I love this machine. Thanks for this helpful video.

@cowboy4323 6 ай бұрын

Awesome video! I have a kenmore 1207 and the owner's manual doesn't have the best pictures, but this video was so clear and easy to understand! I tried following along my manual, but ended up relying on this video entirely. Thanks for your work!

@sewingmachinetipsandtricks9079 6 ай бұрын

You are very welcome! Thank you for watching!

@robintuck6249 5 ай бұрын

Best video EVER!!! Thank you, Sir!

@janemartin229 Жыл бұрын

I've had the Ultra Stitch 8 for 40 years--it was my first machine and it still works great. I broke the plastic extension table a few years ago, so I picked up a Kenmore 6 stitch (158-13400) at a Goodwill store for about $15. Recently I found a 10 stitch (158-12512) for only $10 at the Restore and couldn't pass it up. They all work and now I have parts! Mine are all portable machines and have the free arm.

@Cbegnaud 2 жыл бұрын

158.13250 I love it have used it for auto interiors for over 25 years

@brokenchordsunderground Жыл бұрын

I have been struggling with this machine for years. Thank you so much for your video. I can finally use it. I have a model 158.12271 but it almost the same. Rebecca

@ladybonnie8985 Жыл бұрын

I have a Kenmore similar to yours when turning the wheel my take up lever and needle will not move up and down. It is solid frozen. Any suggestions to fix this issue would be most helpful and appreciated.

@ronalddevine9587 2 жыл бұрын

This is the second time I've watched this video. I own the exact same machine, and I can't praise it enough. I also own the free arm version, 158-1941. Other than the singer 201-2, I'll take these over anything. Smooth, quiet, powerful, and reliable. Pity Sears isn't still around and more pity for the plastic junk of today.