How To Wrap Exhaust Headers

Рет қаралды 537,061

7 жыл бұрын

This video shows how to wrap exhaust headers. There are a few different applications of exhaust header wrap, but the principals are pretty much the same and covered in this video. After watching, you should be able to wrap exhaust headers effectively.
2" Exhaust wrap: www.amazon.com/010127-Titaniu...
1" Exhaust Wrap: www.amazon.com/010126-Titaniu...
Clamps: www.amazon.com/HYCC-100pcs-St...
Tool for Clamps: www.amazon.com/DEI-010220-Loc...
Previous video in the #FairmontProject series: • How To Square a K Memb...
The #FairmontProject playlist: • ETCG Gets a New Car! -...
The best place for answers to your automotive questions: www.ericthecarguy.com
Check out the ETCG Blog for the latest info: www.ericthecarguy.com/blog
Thanks for watching!
Music: Getz_Me_To_Brazil
KZfaq Music
Discussion about this video: www.ericthecarguy.com/kunena/...
Guardians of the Galaxy: www.imdb.com/title/tt2015381/
Related Videos
Rear Control Arm Installation: • Maximum Motorsports Re...
How To Install a Maximum Motorsports Torque Arm For Better Traction!: • How To Install a Maxim...
How To Install a Panhard Bar: • Take Corners Faster! H...
Rear Stabilizer Bar Installation Ford Fox Body: • Ford Fox Body Rear Sta...
Installing the New Differential #FairmontProject: • Installing the New Dif...
Parking Brake Cable Modification #FairmontProject: • How To Fabricate Parki...
Removing the old engine from the Mustang: • 1982 Mustang Donor Car...
**Answers to your automotive questions found here: www.ericthecarguy.com/faq
Social Network Links
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Google+: plus.google.com/1001951801966...
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Пікірлер: 753

@brendantaylor6879 7 жыл бұрын

I just used this exact stuff (DEI 1 inch) on my motorbike header, and you have just documented EVERYTHING I went through! Not cutting enough wrap, getting tangled, breaking the metal straps, wrap fraying...don't forget tiny shards of fiberglass EVERYWHERE....I basically sacrificed a mechanic's uniform thanks to this job...

@thunderch1ck3en 3 ай бұрын

They tell you to soak the fiberglass wrap in water to keep from shedding fiberglass shards. The titanium is made out of basalt, so it's not as much of a PITA.

@lexmaximaguy8788 7 жыл бұрын

Looks like exhausting work!

@panzerveps 7 жыл бұрын

It's a fairmount of work.

@alecfleming373 6 жыл бұрын

Looks like these jokes wrapped it up...

@Cr0710 5 жыл бұрын

After all that work, I’d be running on fumes!

@mjrice9136 5 жыл бұрын

LEX Maximaguy87 wow.

@japiebruce4045 5 жыл бұрын

I cant get my head wrapped around it

@cambrown2784 6 жыл бұрын

I love how in the beginning he's trying to teach us this counting the circumfrence to pre-trim the wrap, then by the time he's gotten to the other header he's "just use the whole roll, f*ck it!" lol

@nommchompsky 7 жыл бұрын

Best part was sound the plug wires made when he removed them

@NoblesTx 2 жыл бұрын

I had to rewind it just to hear that Lmao

@ryhendo9767 2 жыл бұрын

Giggity!

@cpt1124 5 жыл бұрын

Honestly man, great video. You didn't edit out the trials and tribulations, and your dry sense of humor made it hilarious. I think based on this I'm going to skip wraps for. Great content!!!

@mathewshackelford8037 2 жыл бұрын

For you turbo guys (and Eric may have noticed this as well), when you wrap exhaust and turbo manifolds, since it helps retain the heat, it can actually aid in spooling turbos faster since you're losing less heat. This could impact your tune, but not always. Great video Eric!

@dmatt695 2 жыл бұрын

Not sure if someone mentioned this or not but to eliminate the fraying I use liquid super glue on the ends. Best way is to do a line of glue across the wrap beforehand then cut it after a minute for a very clean cut. Works amazing.

@TryDiy 7 жыл бұрын

Eric, you wrap better than Kanye.

@NoBrakes23 7 жыл бұрын

Low bar. Queezy barely bothers to rhyme half the time.

@TheTurpin1234 7 жыл бұрын

Thats an insult. Kanye is a gay fish. Eric, you wrap better than Lil Jon and the Eastside Boyz

@trychan959 7 жыл бұрын

TryDiy fuck Kanye its like saying Eric you wrap better than yo mama is not nice man :(

@FreshKicks4545 7 жыл бұрын

TryDiy hahaha that is funny

@savethehondas7348 5 жыл бұрын

TryDiy that’s not hard to do considering he is the worst wrapper” on earth

@spardadmon5236 4 жыл бұрын

Nice! I just ordered RRE headers to replace my stock exhaust manifold and I plan on heat wrapping them before installing. All I needed was a how to vid and I was not disappointed to see your vid pop out as a first choice. Thank you, sir.

@PapaWheelie1 7 жыл бұрын

All of those college classes in underwater basket weaving finally pay off!

@zachrenison8081 5 жыл бұрын

Great video, always good to watch someone that is not a pro and shows their mistakes ..

@emtscythe3782 7 жыл бұрын

Stainless Steel Hose Clamps Also work very well on wrap. I personally prefer the pre-soak wrap as it tightens up as it drys and doesn't tend to slip around with the heating and cooling cycles. Great video Eric, this will really help those who have never done wrap before.

@jonathanpinckney9227 Жыл бұрын

I was thinking about using hose clamps.

@bbrown9763 5 жыл бұрын

Great video. Thanks for leaving the "mistakes" in, that's what we need to know!

@stickyicky2120 7 жыл бұрын

I look forward to every Friday for these videos! Thank you Eric.

@trainsbangsandautomobiles824 7 жыл бұрын

I've never seen a video on how to install wrap, glad you did one. Between your experience with those ties and boosted miata saying to use aircraft safety wire, I'm going to try this myself on my turbo Escort. Thanks,

@rayparson7899 7 жыл бұрын

kudos to you Eric, great videos, I got some tips that'll save me time and material. and i must say including your own mistakes for us to watch is incredibly commendable! I believe it reflects your honesty and you are a better person for it. you have my subscription, keep it up Chief!

@MachineChrist6 6 жыл бұрын

The pop sound as you removed the spark plug tubes was so satisfying for some reason.

@lilmanjeeps 7 жыл бұрын

In my honest opinion, nothing beats the awesome look of a wrapped pipe on a car or especially motorcycle. I plan on doing my header and bike now that I've seen this video! P.S. Mummification is definitely a dying field. bu-dum- tiss!

@dandel351 7 жыл бұрын

When I wrapped my headers I did it with them off the motor , much easier that way. Plus I used some thin tie wire twisted together for tension (el cheapo solution) to hold the wrap tight as I went along. Then used the stainless clamps up near the exhaust ports on the head. I also kept the wrap away from the header bolts slightly so that I could still get the bolts back in once the headers went back in the car. Be ready for some smoke when you start it up the first time. Because the header gets hotter and it will burn off the paint that's on the header.

@burkeyatm 4 жыл бұрын

Handy hint: start with the longest pipe. If you come up short, you can use it on a shorter pipe and learn how much extra you need in the process. 👍

@mckjordan 7 жыл бұрын

That look absolutely fantastic!

@alexgarza2759 2 жыл бұрын

Man you have so much patience. You are the man. Thank you. I have this same set up on the Mustang. Now I have an idea on how to.

@R.E.HILL_ 7 жыл бұрын

I like that it's easy to see that you don't do wraps for a living. Makes one not be scared of having a try oneself. Thx for sharing..

@jscottfischer 6 жыл бұрын

I just have to say your humor and the way you do things are refreshing brother, keep it real!

@r.arabian3056 5 жыл бұрын

I appreciate your video and you experiencing it like the rest of us humans do!! Mistakes and all. You just helped me prevent making them. Thanks.

@gglovato 7 жыл бұрын

i would've loved to see a thermal camera image of a before and after the wrap once installed on the car, as well as surrounding part temps

@pudgylittlehamster 7 жыл бұрын

Guillermo Lovato they demish heat very well. I did this for my old truck. headers and a new heat shield inside and you can feel the difference.

@gglovato 7 жыл бұрын

what safety wire?

@thiagovilarinho937 6 жыл бұрын

Engineering Explained meets ETCG

@slipknot73745 4 жыл бұрын

@paulsonrc If you could prevent wrap shifting it'd make more sense to have no overlap, exposure to laminar heat dissipation. Thanks for your presentation!

@TheRealFobican 3 жыл бұрын

How many horsepower does this increase the performance to?

@Outlawgunfighter1873 Жыл бұрын

Guess I'm about to go outside and wrap mine. I looked it up to see if it was anything special.seems easy enough. Thanks for having a video.

@sfirlaki 2 жыл бұрын

A tip for people making big power (with actual high exhaust temps) or have aftermarket turbo setups, would be to wet the wrap before hand and make sure to pull it EXTREMELY tight after each loop. Its the difference between it unraveling after a few heat cycles vs it never unraveling after 100s of heat cycles...

@TheRoadhammer379 Жыл бұрын

Header wrap is a good idea on any headers, doesn't have to be "big power" applications. I use it on my small power 545 stroker 460, the heat soaks into the starter and wreaks havoc on starting without a 30 minute cool down.

@ceescorner 5 жыл бұрын

Nice job wrapping, i did similar with my tubular manifold and downpipe. It withstood 7 years and when i parted the car out it was super brittle and fell apart by that time. I also find it useful to go to harbor freight and get a big bag of those metal ties vs name brand. You get more per dollar vs the little kits with a little bit of ties. The down side they are all long so cut to fit but that was the only difference.

@RayLovesCars 3 жыл бұрын

I got a header ordered for my car that’s made out of all stainless and doesn’t have provisions to bolt the stock heat shielding back on. I originally wasn’t gonna wrap it but after watching this I feel like it’s gonna look pretty cool and probably be beneficial to add

@TheOnlyToblin 7 жыл бұрын

The music just dotted the i on this one. Well played, Eric. Well played.

@drivingparadox 4 жыл бұрын

I'm here because I need to do this and don't know what I'm doing. Appreciate the demonstration and tips. Thanks.

@lichin11 7 жыл бұрын

You have helped me save thousands of dollars in labor and other vehicle repair expenses during the last few years. Thank you.

@ericthecarguy 7 жыл бұрын

I'm happy to help. Thanks for the comment.

@88keys30 3 жыл бұрын

Very Helpful . Thanks for sharing & great commentary !

@markmccawley2526 7 жыл бұрын

I have found better performance and useful life of the headers by spraying them with VHT coating let it dry before installing the wrap, Then perform a second coat. Allow the second coat to tack, this will help retain the wrap to the header. If one is so inclined they can spray the exterior of the wrap too with the VHT.

@ericthecarguy 7 жыл бұрын

Excellent suggestion. Thanks!

@TheMikel302 6 жыл бұрын

I have a 347 stroker with patriot mid lengths. I want to wrap them for under hood temp purposes. I heard a lot of people saying wrap ruins headers because they get too hot and rust. Does that vht trick keep that fro, happening?

@andyroo3022 Жыл бұрын

The headers wrapped make the engine look way better. You will have to lay on the ground to see mine, its a VW Beetle. Being air cooled, I could use less heat around the engine. I started my sidewinder header the other day. I found out by trial and error that gripping my hand around the wrap on the pipe and twisting it in a tightening motion as I progressed, this made the wrap snug down really tight, before clamping with the ties. Oh and my hands got very itchy from loose fibers, good to see you wore gloves. I had some unraveled strands on my first section too, so your issues made me feel better. Thanks good video Eric.

@Seandoestech 7 жыл бұрын

Aircraft safety wire is better to lock down those wrap ends and any loose areas of the wrap. Those crappy bands break over time after a multiple heat cycles. If you use safety wire, be sure to get the special tool that allows you to twist and cut the wire. looks really sharp and very pro.

@techcloan2050 7 жыл бұрын

Yep - .032 SS wire and twister tool is the way to go!

@hooverspeed 7 жыл бұрын

Safety wire FTW!

@NoBrakes23 7 жыл бұрын

Man, I haven't played with SWiPes since I quit working on aircraft. Kind of miss it.

@Seandoestech 7 жыл бұрын

Been watching videos to see how the old pros do it - so cool.

@LinusScrubTips 7 жыл бұрын

thanks for that info!

@corygosso6380 7 жыл бұрын

EVERY time i see your videos i think well at least i'm not the only one that lives with murphy's law you gotta love what you do! anyways i love your vids keep'em coming thank you eric

@Xsoul1000 7 жыл бұрын

I like the way the samba has ended at the same time you have ended the wrapping... Can't wait to see the Fairmount rolling.

@Jsbs1991f 7 жыл бұрын

liked how at the end of the video, you shrank it, so the other video icons would not be in the way of your face. I hate that so much when it does that. So good job and good show.

@sadakotube 7 жыл бұрын

Good job with the wrap, my first experience went badly. it was glass fibre type, and I didn't soak it, and did not cover my forearms. IT ITCHES!

@TonyLoewen Жыл бұрын

I had the same issue with one of the threads on the end pulling and making a mess out of the end of the roll, what I ended up doing is just zip tieing it and that worked great. Great jobs, looks great. An

@frankiegarza3002 2 жыл бұрын

Subs because this helped me wrap the long tube headers on the 67 Coronet so much more easier yesterday I had the stupid thing in my lap with the heat wrap not knowing how to go about it but then I totally didn't think of wrapping them halfway down to the collector altogether and then doing the last two halfway.. DUH 🙏🙏 Thanks breh

@TheChrismsanchez1 3 жыл бұрын

I feel your pain! Thanks for the video. I tried this 2 years ago on my header. Very similar frustrations the whole way. The stainless steel retainers were a disappointment as well.

@yamaha94O Ай бұрын

Very informative. I have an SVT header I wanna wrap before I put it on my first gen ford focus and this gives me at least an idea how to do it when the wrap kit and gaskets come in. It's a really funky looking header and will probably be a pain to wrap, but the plus side is only have one to do since it's only a 4 banger. Lol

@ChrisRestores 7 жыл бұрын

turbo looks good 🤘

@robomania6164 4 жыл бұрын

Thanks for the informative video. I'll be wrapping my header right now. Hope I don't get to exhausted 😅

@s3rpith495 7 жыл бұрын

I literally did this the other day on my RX7 and saw this in my feed and was like "Waiting to learn I did something wrong" lol

@AntifIaw 6 жыл бұрын

was hell to do this without uninstalling the part. Got it done, thanks. Used all of my 2" 50

@HodgePodgeGarage 7 жыл бұрын

Thanks for the video. I plan to do this when I drop my 470 stroker in my 72 Satellite.

@EricErnst 7 жыл бұрын

wow, at the beginning, you made that look hard. the second side looked much easier. I've used 2" stuff. i chose to use hose clamps to hold the wrap on the primaries and big hose clamps on the collector. it worked well for me. i just used regular black dei wrap, not the fancy titanium stuff. i like to wrap before i even install the headers. cramped angles that would be impossible were cake. 2.4L Alero. 2.8L S10, small blocks in full sized trucks. small block 3rd gen Camaro. 10 degree cooler intake air = 1% more power. keep up the great videos, man.

@ThatACRGuy 6 жыл бұрын

I highly recommend going over it with a blow torch , just a quick once over , it heats it up and makes it squeeze the pipes tight and makings smoking on first start up less. I worked with a lot of that wrap over the years and found out a few tips

@robertmclean6629 4 жыл бұрын

Hi: I loved this video! Like millions: can we get a FLIR reading of heat exchange efficiency? Like maybe a video detailing why you wrap and it’s pros and cons? Maybe use aircraft safety wire and demonstrate that tool? Wrapping is kind of a dark art as the few people who know a lot about it are race car and aircraft/jet engine mechanics. It’s like welding; everyone want to know about it but no one explains it.

@mehrdadmazaheri6922 7 жыл бұрын

That header looks cooler after it's done! 👍

@AndrewB23 5 жыл бұрын

It looks even cooler after in a few years when it's rusty and cracked

@joshuamitch22 7 жыл бұрын

That pop from the spark plug boot coming of is so satisfying 1:36

@JimOrr_OK 4 жыл бұрын

Thank you for the video, I have a set of headers to do on my C10.

@AF29007 7 жыл бұрын

mummification is a *dying* field ;D I'll see myself out

@t2p 7 жыл бұрын

😂Your level of humour is wasted here

@lilmanjeeps 7 жыл бұрын

I commented that then scrolled down to see this lol great minds, huh.

@aussiebloke609 7 жыл бұрын

Excerebration was a growing field for a while - until someone invented the collapsible steering column, anyway. :-P

@andrewpersaud1606 6 жыл бұрын

Best comment here.

@babyhuez597 5 жыл бұрын

Lmao!

@petrmiskerik 7 жыл бұрын

superb video, thx eric

@Dragferret 2 жыл бұрын

Thanks mate. All the other videos seem to show Chevs. I'm about to tackle a Windsor so your video is quite relevant.

@hawkeyestiguy 5 жыл бұрын

Nice install. I always use worm-drive hose clamps instead. Also, I prefer PTP products over DEI. Just seem to be better put together IMO.

@The_R-n-I_Guy 5 жыл бұрын

I didn't realize it was that difficult. Or that it took so much wrap. Glad I watched this before tackling my car

@willyck948 6 жыл бұрын

Great tips helped me a lot but... I put it on my briggs vanguard and it caused bolts to the heads to get hotter and come loose so when installing exhaust hardware it's important to tighten bolts after few heat cycles and if working with threaded pipe a support brackets is must have to keep pipe tight and inplace. Thank you👍

@stewart4295 7 жыл бұрын

Good lesson how to wrap, and preview of how that stuff unravels, Regards, Stewart Australia

@jacksmith3189 4 жыл бұрын

In your opinion,, what is the life expectancy of “wrapped” headers ?

@rgreerjr 3 жыл бұрын

a few days

@lukeschneider8760 3 жыл бұрын

It is generally 3-5 year

@makantahi3731 3 жыл бұрын

@@lukeschneider8760 you are right, my was 4 years

@donkyuhbuhts540 7 жыл бұрын

I have a 50' role of the same stuff sitting in wait in my room to wrap my Integra. haven't decided if I want to wrap the current header or get I new one. I'm super excited to cool the engine bay though

@williambiggs2308 7 жыл бұрын

That's a wrap! Nice job Eric!

@jjgr661 7 жыл бұрын

Good quality video , Very easy to do with the engine out of the car.

@jessepersaud4815 7 жыл бұрын

hi Eric.For the unraveling of the wrap. think of it as triads on a old jeans you turnt into short. you can simply apply heat at the ends of the triads to stop it from unraveling. I've never done wrapping of the exhaust manifold and i'm quite young but it's just a taught i had and felt like sharing

@locomorty 5 ай бұрын

Thanks for that! I'm gonna give it a go.

@jonathanpinckney9227 Жыл бұрын

Gonna use this as the tutorial for wrapping the header I bought for my xB.

@3ad3pt3 Жыл бұрын

The clamps that you use for the axles work great ...

@NebukedNezzer 7 жыл бұрын

This was good. I have never wrapped headers myself.

@VelocityLabs 7 жыл бұрын

That DEI is really good stuff, I installed some on my Eclipse manifold. A word of warning though, when you first start the car they will smoke and smell very bad until whatever it is that's burning is all the way burned off. So I'd recommend starting the car with the hood open and let it run outside for a good 20-30 minutes. Or just hit boost and drive fast so the wind takes the smell away ;)

@matthysharmse4200 4 жыл бұрын

cool video thanx. it makes it look soooo awesome

@pvkjhilk8323 7 жыл бұрын

looking good and functional

@jcc369 5 жыл бұрын

What part number valve covers are those? I’m looking for similar ones to fit my Trick Flow heads with roller rockers.

@linus60305 Жыл бұрын

Super helpful. thx!

@Rivalryplutoub313 7 жыл бұрын

Loving the music!

@garystump1776 5 жыл бұрын

Hello Eric, this is just suggestion; from front to rear, tube 1) wrap from header to collector ( the metal clamps (they will loosen up and corrode and fall off) suck don't use them, use safety wire, make a double loop around tube and pig tail tight. tube 2) wrap from collector to top and safety wire with double loop tight. tube 3) from collector to top and safety wire. tube 4) start at top and work down and include lower part of tube 3 finishing at collector and again use safety wire. The small band clamps will loosen up in time plus they fray the wrap material. When starting cut the material at 45 degrees and add super glue to edge so no fraying happens. If you use .032 size wire stainless wire ( as used in aviation) it will stay tight and no corrosion. good luck hunting for a job well done. I visit your u-tube often. Thanks

@joselouru 3 жыл бұрын

Thanks for your videos bro

@KENARDO 7 жыл бұрын

Never took you for a bossa nova fan, Eric. I can dig it.

@thangcacdi 6 жыл бұрын

Hey Eric, is it true if you wrap your pre-catalytic converter (ones coming off the engine) that it will prematurely destroy them? I have a 2007 honda accord v6 and was thinking of getting high flow cats and exhaust wrapping them since there are no mounts for heat shielding. Your advice and input will be great!

@gavinmcclure8047 5 жыл бұрын

I have to say Eric I dont care for many people on youtube. but I really enjoy your videos . don't matter if its hondas or old school cars.

@TrionicSeven 7 жыл бұрын

Nice vid as always. More Bossa Nova music at ETCG :)

@fxdbeebe 7 жыл бұрын

little off topic but are you going with those breathers on dark matter pikachu or are you goin with a caych can system? i would think for a turbo car that breathers would just get soaked in oil after going on a drive. with the blowby from a turbo, but i can always be wrong lol

@dirkdiggler5821 Жыл бұрын

I admire your patience.

@genesssisss 4 жыл бұрын

Looks great

@jeroenvde 7 жыл бұрын

That's a wrap!

@FGuilt 7 жыл бұрын

Damn it. you took it! :-)

@SubGR77 7 жыл бұрын

Kind of surprised that the car guy didn't use that slice of cheese.

@mr.actiongal1017 7 жыл бұрын

exactly the first thing i was gonna say

@plkj13 4 жыл бұрын

Your thoughts on Hi-Temp Silicone Spray ? I was contemplating on using it

@EvilGeniusGaming84 7 жыл бұрын

Awesome video as always! And almost at 1 million subscribers!👍🏽 congrats on your success Eric!

@ericthecarguy 7 жыл бұрын

Thanks!

@SuperDave21 7 жыл бұрын

Hey Buddy... you're not the only one that stuff is fiddly to! I hate that stuff with a passion for that reason. I took my headers off and went to HPC (High Performance Coatings) in OKC, OK and had the coated inside and out with their thermal barrier coating and the outside top coated with the ceramic polished stuff.... $385.00 worth of coating on a set of Hooker Super Competition headers but they still look like new I'm told... I sold the car they were on several years ago. DEI makes some great products, but like you say... it's best done off the engine and I went from the primary tubes downward so the overlaps were laying on top of each other like shingles on your house... the exposed edge is on the bottom that way. You rock man! I used stainless safety wire to secure mine with a twisting tool... works great and I hid the ends under the bottom of the tubes. I noticed the bolts are out of your valve covers.... whatcha doing in there?

@ericthecarguy 7 жыл бұрын

Good eye. I was swapping valve covers and engine accessories that day. That will be in a future video. I would love ceramic coated headers, but this was less expensive. I'm in to this build pretty deep at this point and thought this was a good way to save some $. Perhaps I'll install a set of ceramics later down the road. Thanks for the input.

@joeleenkado5761 7 жыл бұрын

great video!

@tjtackett2651 7 жыл бұрын

that's some good stuff

@Pwl47 6 жыл бұрын

I wonder if screw type hose clamps might work to hold the wrap in place.

@Carstuff111 7 жыл бұрын

I have wrapped a few headers, my first attempt was not so good.... it was a little floppy. The second time, I was not able to cover as well as I had hoped, but it worked.. then it came off after a year from being hit with a power washer... the header I wrapped after that was not pretty, but it was functional and I sprayed it with header wraps spray to hide that fact. The last one I wrapped, was a bit of a work of art.... and spraying it with header spray, in black, it looks freaking sick in my friend's engine bay. That all said, the first header I wrapped is currently on my engine these days, and while it was not sprayed, and it is a bit floppy, it has held up, and in all cases, really does make a huge difference under the hood.

@steve_ohhhhhhh 7 жыл бұрын

gday from Australia. Loving the Fairmont vids. It's what got me onto your pages. 👍

@OldManFrank 7 жыл бұрын

*Odd* I finally found CARB EO approved headers and was wondering how am I going to wrap them? Then, *BOOM*, Eric does a video.

@LPWWE06 3 жыл бұрын

proper man!

@Aykutreyes 4 жыл бұрын

Hey ETCG do you think I could use hose clamps instead of the fiddly rings?

@guidosarducci3047 4 жыл бұрын

Hey Eric, I did my last set of headers on the bench, and it had it own challenges. It was more difficult to pull it tight and keep it tight with the headers just laying there. I think your way is gonna be the best way for me to try this time. A question for you please...have ever used header tape with aluminum heads before this motor in the tutorial? I was a little concerned with heat build-up. I've never ran aluminum heads before and wanted your thoughts on the matter if you would please. thanks man