HVAC Tech Tips Review: Kaiweets HT208D

Рет қаралды 11,144

Күн бұрын

In this video we review Kaiweets HT208D amp meter. Please like and subscribe! Hope you enjoy!
You can order yours on amazon at
www.amazon.com/gp/aw/d/B08CX6...

Пікірлер: 34

@daviddesilva4971 3 жыл бұрын

You can't beat the price. Bonus light. Thxs for the review!

@KissAnalog 3 жыл бұрын

Great review - thank you!

@jeremysmith3729 2 жыл бұрын

Trying to figure out how you use this as your daily driver, since it appears not to be able to measure the microamps needed for a flame sensor.

@alandaters8547 3 жыл бұрын

The Habotest HT208D appears to be the exact same meter and is being sold on AliExpress for $47. I just got one and compared the exterior and the circuit board/components to those shown in another review of the Kaiweets and they appeared identical. All the functions are the same. (And yes, it is the HT 208D, not a 206 or 208A which are cheaper but don't have inrush capability)

@benkanobe7500 2 жыл бұрын

Would have really like to see how to use the inrush current. I am not getting it to work.

@162545710 Жыл бұрын

It's a great video, I like it and I'll buy one

@engineer1793 3 жыл бұрын

Can you change the outside temperature from celsius to fahrenheit?

@jonsteiger440 9 ай бұрын

Is this suitable for testing thermocouples in the 20-30mV range?

@juanpiter2767 2 жыл бұрын

Hi! You can measure the frequency with the clamp?

@juanpiter2767 2 жыл бұрын

Hola! Puede medir la frecuencia por medio de la pinza??

@foodieontour 3 жыл бұрын

A word on accuracy particular on the DC Amps would have been helpful.

@alross18058 2 жыл бұрын

you can buy the magnets with a strap that go right on them from amazon for $10-20

@carlos82341 2 жыл бұрын

What about the inrush current measurement

@hvili79 3 жыл бұрын

super

@PrincessAlexisfuntime Жыл бұрын

@HVACTechTips I have the HT208D and do not get any inrush reading when my AC compressor starts up. The normal current draw on my AC compressor is 6.6A. Kaiweets tells me that if the inrush current is not above 10A, there will not be any reading on the meter. Do you know if this is true and have you tested inrush on anything less than 10A?

@alia.salman4815 6 ай бұрын

Try to use MAX instead

@Chrominance87 3 жыл бұрын

Some aligator clips would be nice.

@user-cb3we5kn8d 3 жыл бұрын

nice video

@mobilecommunicationsnetwor5268 3 жыл бұрын

Could this KAIWEETS Digital Clamp Meter T-RMS 6000 Counts, Multimeter Volt… $47.99 work for HVAC as well?

@HVACTechTips 3 жыл бұрын

Yes! This is my daily meter I use

@mobilecommunicationsnetwor5268 3 жыл бұрын

@@HVACTechTips Do you know of a similar product for smart probes? Field P the standard are high in price.

@jonhvac 3 жыл бұрын

Meters that default to DC gets annoying real quick IMHO.

@franciscj8211 3 жыл бұрын

Good informative vdo How to buying HT 208D KAIWEETS I am from INDIA can you snd replay

@hewlett62 2 жыл бұрын

AliExpress, search Habotest HD208x, same specs @ identical device

@daveyakutchik3493 2 жыл бұрын

Does it do miilivolts and microamps DC

@HVACTechTips 2 жыл бұрын

Yes

@Oldtech51 4 ай бұрын

It stinks that it only displays temperature in small font for fahrenheit.

@transformer889 2 жыл бұрын

A magnet in the back would affect many functions,

@HVACTechTips 2 жыл бұрын

A magnet don’t effect my fieldpiece and fluke meters.

@jimsjacob Жыл бұрын

@@HVACTechTips. I was wondering about this as well. Couldn’t just glue a strong rare earth magnet on the back? But would that impact/effect readings? I truly don’t know….