If you do an Iphone, you should send it to Louis Rossmann and just tell him it's a water damaged phone.

Very interesting! Now I want a water jet!

The "vibrator" is an antenna cable.

"i didnt know there was a battery when i cut it" lol

I'll remember this the next time I complain about my phone being too old. have me a deep appreciation of the effort into making one of these things.

This isn't a teardown, its a cut down.

That cut was amazing! I couldn't believe how many of the small components stayed put and didn't get ripped out. If you have any old busted gopros or RC nitro engines sitting around they might be cool to see. What I'd really like to see cut is the phone line to those people that keep calling about my car warranty. That's a solid gold episode if you can arrange that one. :D

I've seen many Waterjet videos but I haven't seen cuts that clean and you said it was a dirty cut, more please.

The part called out as a vibration motor is a micro-coaxial cable for the antennas. Definitely an impressively clean cut though. I'm impressed that such fine features are so nicely intact without having been frayed by the cutting.

This Cut looks way better than what the Dudes from the Waterjetchannel are doing! Love this Clean cut!

Excellent addition to the shop. Your fabricating and testing just leveled up dramatically! 👍 😃

Done that once with a band saw and got suspended from school for it

The thing on the last lens is just the focus driver. For image stabilization, normally the entire camera is stabilized/moved. The technology is similar to the actuators on the laser on a CD player, only the feedback comes from a MEMS gyroscope instead of the laser phase interferometry/focus. The thing that looks like the vibrator could be the microwave antenna cable. It's a thin shielded cable. Routers have them, too. I'm not amazed about how they cram stuff inside there, I'm amazed how high can they set the prices for so few materials xD And then fill it with bad updates so you need to buy the next one. Ps: don't try with a new phone, the old IR fingerprint reader was interesting. Today they use capacitive readers. It's just a conductive sheet of metal. But you could have cut this one in more slices!! :-D I would like to see that! No, really: phone designs are getting simpler. You may get the processor and most components on one chip and then another chip for the sensors, another for the radios, one more for memory and storage, and that's it. You've been lucky the battery was "dried" up before cutting it xD

That's fascinating seeing all the lenses to focus the image! WOW!

Crazy clean cut. Keep up what you do brother.

That is an incredible machine! Such a precise cut without warping the phone.

I SAWED THIS SMARTPHONE IN HALF And repaired it, with only Flex Tape™️

Amazing beauty & a true work of science, ..those layers. Nice one guys!

The accompanying music following the cut definitely added value to the overall production.

Blew my mind too man! WOW thanks for this, super coooool!

Oh man! This is crazy cool! Never seen a phone this way!

So clean. Amazing

Love your channel bro. You so great vids. Keep em coming plz!

This video was awesome! I have a new appreciation for my S5. I've been using it 6 years now.

That was crazy impressive!

This reminds me of waterjet channel too much lol 😂 nice video,it was interesting 👍

Well that looks amazing

Wow.. that water jet does such an amazing cutting job. I'm well impressed with it. And that stack of lenses for the camera. Who would have believed there were so many. My best guess would have been 3! Thanks for cutting your phone in half for us!

:O just when you thought this channel couldnt get any better, you get a water jet cutter omg!

This is REALLY cool! None of the internal components are mangled, just a neat clean cut. I'd love to see more cross sections.

Oh yeah. Love your vids!

That cut clean!

Wow that little water jet is awesome! I got super excited then saw the $24,000 price tag lol, technology is awesome and thanks for showing us this!

Sick job bro. Thanks for sharing!

I got satisfied with this, u never dissapoint,, love from Africa

Holy shit! That's what I call precise... Wow

Coolest thing I've seen all week

Nice one! Did not expect the lens elements to stay in place.

Incredible!

Wow!! Great video

You should make a see thru 2 stroke engine

WOW THATS AMAZING

That's really interesting.... thank you

Awesome, more things it's possible ? There is very interesting for experiments

Awesome! I like the way you think. :)

Awesome !

Glad you put this on your main channel good stuff

Wow this is awesome

Hey was supra impressed

Way cool👍🏻

This video could be the concept for an entire channel

Awesome well done.WP.👍🇬🇧🤘🍺

It seems that the *only* part that would have needed a slower cut speed was the camera lens. Everything else seems to cut very nicely even with this cutting speed. That's very nice water jet indeed.

Amazing to see that..also cut the catalytic converter of automatic transmission 😎

That would be the perfect use for an iPhone hahahaha. Indeed a cell phone is pretty well packed with parts. Not much empty space at all.

That was interesting a bit surprised the battery did not get angry You should all get together with Fireball tool as he does incredibly stuff with his 5 Axis water jet

Hi-Speed camera next!

I JUST SAWED THIS PHONE IN HALF TO SHOW THE STRENGTH OF FLEX SEAL 😂😂

To show you the power of Flextape... 0:09 I....

"I didn't know there was a battery in the phone" O_o wut?

Leenus Tech Tips

You always post an interesting video. Thanks for doing what you do to entertain us.

Minus that stupid charging port, that s5 is one of the best cell phone designs ever.

Cool! :)

Great👌

Hello love your video, i have a question where is the video about see through diesel engine 🤔😊😁 i want to see diesel engine run with a clear plastic plzz

Dope

Waiting for waterjet channel to come play😂

Would be great to see you do some lapping for things like this. Pretty incredible how cheap you can buy or build a slow/variable speed wet lapping machine. Honestly it’s just as satisfying and easy to do it by hand. If you had lapped those surfaces after cutting… I can’t imagine how beautiful that would’ve looked! Definitely possible some of the pieces may have fallen out or been wrecked… But you could always stabilize everything with epoxy or super glue....and once hardened… lap everything flush until it is flat and polished. Maybe something like 120, 320, 600, 1200 grits, (all wet sanding of course) and then go to a buffing compound on a piece of mdf or something hard and stable like that… just porous enough to hold the lapping/polishing paste. But hard enough so it doesn’t distort or curve up around the edges or small cavities. Even a piece of plain white computer paper on a piece of glass would work to do the final lapping and polishing with paste. Off brand Diamond lapping paste is extremely cheap from China… You can get into submicron sizes. The finest grit I use in my shop is 0.25 micron. I know it’s something around 60,000 grit, which is pretty accurate because I’ve compared it with a known high end brand name Abrasive under The microscope. So that cheap diamond paste is a godsend! And pretty good stuff for the money. Sorry to ramble on… My point is ....you could get incredible cross-section shots with a wet diamond lapping setup. Probably well under $100 And if you haven’t seen them… Google the microscope cutaway/cross-section photographs of cut/lapped electronic components. It will blow your mind. The guy who did all of those is a real artist!

Can you please do a vid of see through Briggs and Stratton vs nitrous? (Blowing the see through engine on nitrous)

How much PSI is that thing? Awesome video bro!

Anddd that's how you make them fold😂

Thank you, cool

Realitatea este foarte bine prezentata de Mihai , treziti-va...

I don’t think someone who didn’t think the phone had a battery in it should be giving us a breakdown of the parts inside. The coil above the bottom lens element will be the auto focus adjuster.

The Waterjet Channel is calling shenanigans!!

More!

At 3:05 you mention about fingerprint scanner but actually it's a blood oxygen level and heart rate sensor !

That was pretty damm cool! I'm surprised the battery didn't go up in flames. Usually lithium doesn't like oxygen very much

I have an idea for you to do you do all these crazy things with cameras see if you can get a housing that would fit a camera inside of a working dog box or transfer case peace out dude I keep making videos✌

top to da bottom now we here ...

I like ya cut, W

Cool, love that you can see the battery swelled out in the middle, is that what killed the phone?

Leeenus tech tips to the rescue

Processor then under a digital microscope. Different typs of balls, softball, baseball, gumball, gulf ball etc. An agate or other rocks. So many opportunities lol

POV: You were told your phone was waterproof.

Please please please use a super slow-mo camera and shoot a close-up of the tip of the water jet in action.

3:49 that's antenna cable

Heck yeah, get some tape to make it flex and BAM you got yourself the new galaxy fold. Edit: words fixed from mobile swype.

After fire he will play with water.. Pretty excited

3:50 this is coaxial cable from the bottom dock board.

when you really want a galaxy fold, but can't afford one lol

To test the power of flex tape I sawed my phone in half

When they said the s5 was water proof I don’t think they were going at it like this

👍

Daaaaaaaaaaaamn

I'm sure glad i don't have one of those toys, i'd cut everything i own to see what it looks like on the inside lol After i cut my whole life savings I'll look back and think to myself... it was worth it haha

Hehe .. pretty cool

I wouldnt be surprised if that battery was on the edge of catching fire / exploding while being cut with the water. The water probably was putting out the fire in realtime haha! Lithium batteries , with the exception of Life, absolutely hate any sort of abuse whether electrically or physically. I dont know if the battery was ballooned prior to this cutting but if not ... that ballooning probably happened while being cut =P

You should cut a whole camera in half, so we can see the lenses and different components