I install an ACERBIS 20 liter fuel tank on a DR 650.

Рет қаралды 28,884

Күн бұрын

Dino’s Tinker Shed, S1-Ep15. Installing an ACERBIS fuel tank on a DR650
In this episode I show you how to install a 20 liter ACERBIS fuel tank on a DR650.
Over the course of the video, I will talk about several items which you can skip to using the Time code chapters below. This is a very common DR650 mod and can give you a range of close to 400km as well as making the bike look much better in my opinion.
TIME CODE CHAPTERS:
00:00- Cold opening
01:03- Intro
01:24- Overview
02:20- Why do you need a big tank?
04:33- Features of an ACERBIS fuel tank
05:13- Parts included with the tank
05:51- Parts you will need to provide
06:28- Review of instructions
06:55- Cleaning the inside of the tank
07:48- Installing the petcock
09:40-Removing the factory tank
15:33- Looking under the tank
15:46-Removal of the front tank shield
16:34- Checking clearances for the new tank
17:05- New tank install
19:50- Addressing the vacuum petcock hose
20:35- Installing fuel lines
21:11- Modifying the turn signals for clearance
24:41- Transferring fuel from old tank
25:12- Summary
26:04- Karl wants his bike back

Пікірлер: 162

@rayfalcon8788 6 ай бұрын

Hey Dino, just purchased the Acerbis tanks for me and the wife’s DR’s. Thank you for an another excellent video, you are very clear and we appreciate the effort it takes to put these online! Safe travels!

@DinosTinkerShed 6 ай бұрын

Thank you for the comment, I'm glad you enjoy the content. Dino

@wileytw55 2 жыл бұрын

I really like the way you explain everything so thoroughly, even I can understand what you are doing!

@DinosTinkerShed 2 жыл бұрын

Happy to hear that! I know the format is a bit long winded for some but I try to be thorough. Dino

@behzadr4850 2 жыл бұрын

The fact that you value your viewers and create nicely done videos will make you successful. Thanks and keep up the great work.

@DinosTinkerShed 2 жыл бұрын

Thank you very much for the feedback and I am glad you are enjoying the content. T Dino

@user-tk5ws3cd3u 10 ай бұрын

Hi Dino I must say that you have the best videos ever, thank you sir and keep them coming my friend Chicco from Israel All the best

@DinosTinkerShed 10 ай бұрын

Thank you very much! All the best to you as well. Dino

@slednut2000 2 жыл бұрын

A couple things to add. I installed the same tank on my 2019 a couple weeks ago. It's a great opportunity to check valve adjustment when you have the tank off the bike. It'll maybe add 30 minutes to the job but save a full disassembly later. Also, dry fit that little seat tab before installing on the tank. I have a Seat Concepts seat and the slot that slides onto the tab is too narrow. I had to grind a small amount off each side of the tab to make it fit. Last thing, I added preload adjustment caps to the front forks to compensate for the extra weight of the fuel. Makes a big difference when braking hard. A great improvement in range, I now get 350 km before hitting reserve up from 200 km. Let us know how that tour up north goes. Oh ya, make sure Karl remembers to turn the fuel on before driving off. It's embarrassing to stall out at a stop light......

@DinosTinkerShed 2 жыл бұрын

Thanks for the great feed back and suggestions. I may let Karl know about the petcock........or maybe not lol

@elego49 2 жыл бұрын

Your instructional video is excellent! Thank you. Without it I would have been in a heap of trouble doing my own tank installation, which I will attempt as soon as the tank gets here tomorrow. You explain the process clearly, with a calm voice that inspires confidence. A little bit of humor also helps. Living in an apartment complex I will probably get fined for doing this in the parking lot; it would still be worth it! Thank you and will be looking forward to your other videos. 👍🏻

@DinosTinkerShed 2 жыл бұрын

Glad it helped and all the luck with the tank install, you'll do great! Dino

@tonywoodsadv Жыл бұрын

I have the same tank on my DR and regret not getting the 'clear' version like I have used on some other bikes. The clear models make monitoring fuel levels so much easier. Good job on your videos. Most informative.

@DinosTinkerShed Жыл бұрын

I think when Karl ordered his the clear was not available, so he went for the matching black, glad you enjoyed the video and thank you for the comment. Dino

@greasycanadianbiker 2 жыл бұрын

A very thorough explanation. It's good you made this video. Some channels don't explain everything like this so it's great you went to this effort.

@DinosTinkerShed 2 жыл бұрын

Thank you for the feedback, I'm trying my best to make clear concise content, I'm not an expert by any means but I'll share what I know. Thank you again Dino

@rangeroadmoto 2 жыл бұрын

Good to see Carl got off the couch in the end 👍

@DinosTinkerShed 2 жыл бұрын

Lol so true. He's liking the tank also. Thanks for the comment Dino

@Hypure2wheels 2 жыл бұрын

A buddy showed this video to me. It helped him with his install. Very informative video. I couldn't have explained it any better.

@DinosTinkerShed 2 жыл бұрын

Glad it helped, and thank you for taking the time to comment, Dino

@rickhadfield1097 Жыл бұрын

Best video out there, very thorough. Thanks

@DinosTinkerShed Жыл бұрын

Wow, thank you so much for the feedback, I know the audio is a bit off though. Thanks again, Dino

@claytonscoggins7851 2 жыл бұрын

Watched this video before I installed my tank. Glad I did because you mentioned checking the inside of the tank for debris first. Sure enough the tank had a bunch of small pieces of foam that I’m sure would have caused complication. Honesty probably Wouldn’t have checked inside first if I hadn’t watched your video. Thank you!

@DinosTinkerShed 2 жыл бұрын

Glad I was able to help out. Thank you for the comment Dino

@MOGLIVIBES 2 жыл бұрын

What a great video! Thank u, Dino and merry X-Mas.

@DinosTinkerShed 2 жыл бұрын

Thank you again and merry Christmas to you as well. Dino

@treering Жыл бұрын

Thanks for making these videos!

@DinosTinkerShed Жыл бұрын

Your Wellcome, glad you enjoy them. Dino

@sspradley11 2 жыл бұрын

I really do thank you for the time you take to make your videos. They have helped give me the confidence to make some of the same modifications to my dr650. Your presentations are also very well done and entertaining even on things I have no plans on doing.

@DinosTinkerShed 2 жыл бұрын

Thank you for the comment and I'm glad you find the content usefully and entertaining. Dino

@melissavisentin9537 2 жыл бұрын

Fantastic Video

@davea9502 Жыл бұрын

Excellent video!! Your tutorial videos are the best.

@DinosTinkerShed Жыл бұрын

Thank you, I'm glad you enjoy them Dino

@Speedytrip 2 жыл бұрын

Great video as always.

@DinosTinkerShed 2 жыл бұрын

Glad you enjoyed it

@markepley1956 2 жыл бұрын

Awesome video! Looking to do this on my 2020 DR650! Thanks for posting!

@streetmachine8211 6 ай бұрын

Great video! Thanks for sharing.

@KK-bu5hx Жыл бұрын

Great video 👍

@jackbutler7741 2 жыл бұрын

Really well Done video ! you take the time to show just how to do this love to see more on this model bike, Thanks, Cheers!

@DinosTinkerShed 2 жыл бұрын

Glad you enjoyed the video. I do have a playlist on the DR if you likes the content. Thank you for the comment Dino

@JohnClaudeSabroske 2 ай бұрын

Great video. 10/10

@DinosTinkerShed 2 ай бұрын

Thank you Dino

@johntame6093 2 жыл бұрын

Really enjoying these DR650 videos! I've wanted a bike since I was a kid and a friend of mine recently had me out on a little Yamaha 230 putting about in his father in law's fields; to make sure I'd actually enjoy riding before taking the plunge and getting a license. It was an absolute blast even if I didn't get past third gear. Depending on what insurance looks like in my neck of the woods you may have sold me on the DR!

@paul1858 2 ай бұрын

Real good video

@williamlightfoot5425 2 жыл бұрын

Hello Dino. I like your videos. Merry Xmas and have a Happy New Year,

@DinosTinkerShed 2 жыл бұрын

Glad you like the videos, Merry Christmas to you as well. Dino

@nothingman3542 2 жыл бұрын

I am a little lacking with my Acerbis 5.3 tank, thats why i came to the master of all things DR!

@DinosTinkerShed 2 жыл бұрын

Thank you for the kind words but I assure you there are many others more skilled with the DR than I. I'm a generalist for the most part but I hope the video was helpfully and thank you for commenting. Dino

@adisyamadasa4238 2 жыл бұрын

Love those little intros haha

@daveparsons7045 2 жыл бұрын

I've never been much of a bike guy, but I kinda want to get a Dr 650.... like the videos.

@DinosTinkerShed 2 жыл бұрын

Thanks for the comment Dave. The DR is just a fun bike, it does everything you need and is as reliable as a stick. Leave it stock or build it into an adventure monster, either way it's happy. Thanks for the comment. Dino

@markm1984 Жыл бұрын

Thanks so much for your service to everyone with your videos, have a miracle filled evening 😊

@DinosTinkerShed Жыл бұрын

Thank you very much. Dino

@gbbluemonday 2 жыл бұрын

I´m going to get this exact 20 litre Acerbis for my DR. Would like to keep the original petcock though.. Might require some heavier modifying I think. I´m also a bit hesitant on the fuel cap compared to my proper lockable original with no tubes sticking out =) but yea things are always a compromise I guess =) Thanks for your videos on the DR´s!

@DinosTinkerShed 2 жыл бұрын

Acerbis is does have a lockable cap option I believe. You are right though every mod has its downsides for sure. Thank you for taking the time to comment. Dino

@ozziejim8472 2 жыл бұрын

How’d ya go mate? Did the OG peticock fit? Cheers

@gbbluemonday 2 жыл бұрын

@@ozziejim8472 hey friend! I haven't gotten round to it yet 🤣. But I've got a few friends who can machine an adapter which will bolt to the Acerbis and have a fitting for the original petcock. We'll see how that goes. Happy rides!

@lukejohnr159 9 ай бұрын

What is the inner and outer diameter of the fuel hose you have used?

@williamrae9954 Жыл бұрын

Should try fitting the same to a CCM644... tank, Suzuki seat(early '90's model) subframe and the rest...joys

@badoldbiker368 2 жыл бұрын

Thanks Dino, great video. Just wondering with the shape of the tank and only one petcock is the fuel from the other side able to flow over when the level is low? It looks like a litre or two may be unusable?

@DinosTinkerShed 2 жыл бұрын

Karl has never run the tank that low but I would think you would need to lay the bike down to get the last bits of fuel over to he left side of the tank. I do think the turning and leaning while you ride sloshes the fuel over to that side. Hope this helps. Dino

@eikskjold 2 жыл бұрын

great video! Don't change a thing.

@DinosTinkerShed 2 жыл бұрын

Thanks for the comment. Dino

@mollygrubber Жыл бұрын

Friggin Karl, so needy 😂

@Tripper2030 2 жыл бұрын

I found that the plastic black guard under the tank did not get in the way when I installed the same acerbic tank. In fact I left it on to help with wind. Not sure if it made a difference though. I guess I would have to take it off to figure that out :)

@DinosTinkerShed 2 жыл бұрын

Thank you for the information, it seemed to iterfere when I dry fit Karl's, perhaps I could have applied a little more pressure to fit it on but I chose to remove it. Thank you again for the information. Dino

@gavinearls2935 4 ай бұрын

i was wonder would this fit a XF650 , the freewind they are the same chassis more or less ?

@DinosTinkerShed 4 ай бұрын

I can't say for sure but I think they are the same platform. Different seat though

@joshveino 2 жыл бұрын

Have you ever installed one on a dr650 with a PAIR system? Currently in the process of doing so and wondering what to do with the hose that goes to the PAIR system.

@DinosTinkerShed 2 жыл бұрын

When you say PAIR are you referring to a pair of petcock or is is something else? Dino

@justgjt Жыл бұрын

I can get 290 km out of the OEM tank left on Res until it sputters and dies. Thats was riding various speeds including periods over 100km/h and also into head wind. Handy to know exactly how far it can get. I also have the Acerbis 25lt (6.6 gallon) but have not fitted it yet but will be running dual Acrebis petcock's.

@DinosTinkerShed Жыл бұрын

Very good to know, and a good practice, I will need to do this test with my Safari. Thank you for the information. Dino

@sebastianjeanes5370 Жыл бұрын

Hi! Where did you buy the tank? Or, any recommendations on where to buy online? Cheers.

@DinosTinkerShed Жыл бұрын

I will check for sure but I believe Karl bought his online from Fortnine here in Canada. Dino

@JavierCharles-jx7no 7 ай бұрын

Unlike the Safari, does the Acerbis allow space for crashbars?

@tahoehiker 6 ай бұрын

Yes, I bought the Acerbis instead of the Safari for exactly that reason. It works fine with the T-Rex crashbars.

@jonwoodworker 2 жыл бұрын

The 6.6 tank just looks ridiculous, I don't care how much range it adds....lol. The 5.5 is a good balance. Unless your in remote parts of the world, I just don't see the need for 5+ gallon tanks. But, as always, great video.

@DinosTinkerShed 2 жыл бұрын

The 6.6 is big for sure. I know my 30l safari gets in the way at times but it came with the bike so I make due, the look grows on you after a while. Thanks for the comment. Dino

@rosarioroberto5823 Жыл бұрын

Greetings Dino, Do you know the difference of weight between the acerbis tank and the OEM tank when empty? Thank you for assisting me. Keep producing more videos.

@DinosTinkerShed Жыл бұрын

Hi I do not know off the top of my head but I will see if I can weigh the stock tank today. Dino

@DinosTinkerShed Жыл бұрын

the stock tank is around 9lb or 4kg. the 20 liter tank that Karl bought was 4kg shipping weight which included all the cardboard and packing materials, which I am guessing is around 500 to 1000g so the tank is bigger and lighter. Hope this helps😉 Dino

@rosarioroberto5823 Жыл бұрын

@@DinosTinkerShed yes, did help. Keep producing more detailed videos🇺🇸🎉🍾🇺🇸

@genewuchner9004 Жыл бұрын

Hey Dino hope all is well. While taking the tank off on a 2022 650 there is another hose on the right side what the heck is that?

@DinosTinkerShed Жыл бұрын

There are a few other hoses on the newer bikes. I wonder if it is part of the charcoal canister that sits under the left side cover. I'm not super familiar with the system but I thought it tied into the tank. Hope this helps. Dino

@genewuchner9004 Жыл бұрын

@@DinosTinkerShed I don’t know but I took it off and no gas came out. All good. You’re my go to guy on KZfaq when I have questions about my DR. 👍

@VeikkoVahatalo 6 ай бұрын

Can you use original suzuki petcock?

@DinosTinkerShed 6 ай бұрын

Great question, thank you for asking. To be honest, I am not sure. I just use the supplied petcocks both my safari and my buddies acherbis.

@ComfyDadShoes Жыл бұрын

Any chance you can still use the stock petcock with the Acerbis tank?

@DinosTinkerShed Жыл бұрын

Hmmm, I'm not sure, that may be a question best posed to a forum like DRriders. I bet someone has asked this before. Dino

@justgjt Жыл бұрын

Yes you can.

@garywilbert3099 2 жыл бұрын

I have a 07 DR Installed a larger tank with on/off petcock, starts right up, but if stalled or leave petcock opens for just a few seconds bike will not start, leave in sit overnight fires right up. Got frustrated and put back on old tank and petcock , petcock is new, now vacuum doesn’t work same issues as with the on off petcock. Have any ideas to my problem?

@DinosTinkerShed 2 жыл бұрын

Thank you for the question, I always start by saying I'm not a mechanic but am willing to offer my thoughts. Id you blow all the possible dirt and plastic shavings out of the new tack before you installed it? It almost sounds like the float or float needle is stuck, if a small bit of dirt made it into the carb it can cause issues like this.do you still have the small fuel filter in place on the carb inlet pipe or an inline filter? Dino

@garywilbert3099 2 жыл бұрын

@@DinosTinkerShed Put an inline filter after the fact. I’m like you I think the float is not working properly , going to try a new float and needle

@damiansuchecki2523 2 жыл бұрын

Hello. I have a question about the vacuum hose. What to do with it? I have an Acerbis tank with a tap without a vacuum hose. I have a vacuum-controlled carburetor. How to make everything work well?

@DinosTinkerShed 2 жыл бұрын

The easiest fix is to simply bent the hose in half and zip tie it, this is similar to how you can bend over a garden hose to stop the water. When I updated the carb with a pro cycle jet kit in a later video I replaced the vacuum hose all together and used a vacuum cap to close off the port. These are available at most automotive stores or online on Amazon. Hope this helps and thank you for the great question. Dino

@damiansuchecki2523 2 жыл бұрын

@@DinosTinkerShed Hello. Thank you for your answer. One more thing puzzles me. If I plug the vacuum hose, will everything work fine? After all, the carburetor does not have this vacuum. how it's working?

@DinosTinkerShed 2 жыл бұрын

@@damiansuchecki2523 another great question. The port on the carb that you are plugging is only there to provide vacuum to the factory petcock. Plugging this port does nothing to impact the carbs other systems. If you think about it, during normal operations the line would pull a vacuum on the petcock diaphram to open the fuel , if the diaphragm is not damaged, no air passes by it and essentially the vacuum line is pulling on a capped end. Does this make sense? Dino

@elindenstein Жыл бұрын

I put an Acerbis tank on my Tenere 700 and I am not liking the condensation/vapor buildup on the outside of the tank. It's making the garage smell like gas and and I can't find other people talking about this regarding the Acerbis tanks (or any plastic tanks for that matter).

@DinosTinkerShed Жыл бұрын

Thanks for the comment, I can only speak for myself of course, and the tank I installed here is on my buddy's Bike, but he has never mentioned any condensation or smell issues. I have never noticed any on my Safari tank either and it sits inside all the time. I'll have to pay a bit more attention and see if it shows any of these issues. Thanks again for the feedback. Dino

@BikerBytes Жыл бұрын

Hey Dino, is the carby vacuum hose the smaller hose coming out of the top of the carby? If so it looks like mine was never sealed up. Bike running fine though, what's the consequence of not having it sealed? ATB Jason 👍

@DinosTinkerShed Жыл бұрын

Hi Jason, nice to hear from you. I thought that hose ran over to your vacuum petcock (if I am thinking of the right hose). not capping it off would create a vacuum leak that could impact throttle response and may allow dirt to enter the carby on top of the diaphragm. I would think you would want to cap that off. It may be that the DR produced enough Vacuum that throttle response is not impacted and that is why you have not really noticed but I would cap it off just to be safe. Thank you for reaching out Jason, please keep me posted as to performance changes if you do cap it off, I would be curious to know. Dino

@BikerBytes Жыл бұрын

@@DinosTinkerShed thanks for getting back to me so soon Dino. I'll cap it off. When the tank is running low I'll remove it, take the top off the carby and inspect the top of the diaphragm for dirt as the last trip I was on was rather dusty. I'll keep you posted! ATB Jason 👍

@DinosTinkerShed Жыл бұрын

Thank you Jason. Dont forget to film and post the video 😉I now myself and others will want to see it. Dino

@BikerBytes Жыл бұрын

@@DinosTinkerShed yep will do as I will take the opportunity to replace the rubber cushions fixed to the sides of the frame that push the sides of the tank out slightly making the tank sit more rigid and clear of the oil cooler. 👍

@BikerBytes Жыл бұрын

@@DinosTinkerShed Well, after sealing off that vacuum hose with a long tight fitting screw I've not noticed any significant difference in how the bike responds. Maybe the vacuum is simply used to draw fuel into the system and doesn't play any other part. Blocking it off is just to prevent contaminants getting into the carby. Thats my conclusion 😁

@ericcournoyer1595 2 жыл бұрын

You did not mention the 'evaporator cartridge'. Those pipes running along the frame that are supposed to go when changing the tank. Emmission thing. I have seen removed on other vids but not clear as to why. Great vid off course.

@DinosTinkerShed 2 жыл бұрын

I did not mention the evaporator, I too have heard of people removing this unit, I'm sure there is a reason but I chose to leave it. Thank you for the question and comment Dino

@benshew Жыл бұрын

Was there any issues fitting the seat under the tank? I just put on this tank with a procycle seat and well, it doesn't seem to fit. I know that's not the seat in the video but just curious if this had to be trimmed at all. Thanks

@DinosTinkerShed Жыл бұрын

Thanks for the question. No Karl's seat for right on with no issue at all. Does the Procyclenseat use a standard seat pan ? Dino

@benshew Жыл бұрын

@@DinosTinkerShed Thanks for the reply, it is supposed to be or a copy of the stock pan. I'm going to get some rubber washers tomorrow to lift the back up a bit more and see if that helps. Thank you!

@kurtisgarrett3357 Жыл бұрын

I had some issues with my stock seat and realized the "secondary air filter" was getting in the way, I have a aftermarket one that is a little larger than stock. Could be giving you issues?

@benshew Жыл бұрын

So in playing with it tonight, I think I just wasn't pushing in hard enough. It was a pain to slot in but I got it in, no trimming or washers.

@DinosTinkerShed Жыл бұрын

@@benshew thanks for the update. Maybe it will get easier as it settles in. Dino

@Leecifer666 2 жыл бұрын

Hi Dino, I just installed the 25L acerbis tank on my 2020 DR. I have the same setup only i'm running 2 pepcocks. After getting it all together and firing it up, it starts with the choke on , but if I let off the choke all the way, it quits on me. bit of a lag when I roll on the throttle too. Any ideas what could be causing this? Did I not ziptie the carb hose enough or something? Any ideas would be great. Cheers!

@DinosTinkerShed 2 жыл бұрын

I would start with the vacuum hose. if any vacuum gets pulled into it it can mess with the carb. I eventually bought some vacuum caps for mine to eliminate any potential problems. I would next check that you have enough fuel in the tank for the "on" position to pick up, if your not sure switch to the "RES" on both petcocks and see if that helps, it may be having fuel scavenging issues if there is not enough fuel. One thing I noticed with my Safari tank, that has two petcocks as well, is that it seems to run better with both petcocks open rather than just one side at a time. Not sure why but it does, do you have both open at the same time? If you put in-line fuel filters, they have a flow direction so double check that they are not in backward. Lastly I removed the small filter that is in the fuel pipe on the carb itself, did you remove this or leave it in. it may have pulled in some crud when swapping the tanks so check to see if it is clean. Hope this helps to solve the issue, please let me know if it does. Dino

@DinosTinkerShed 2 жыл бұрын

One other thing I'm just thinking about. My Safari really required the metal fuel pipe on the carb to be heated up and rotated so the fuel lines were coming in lower than the bottom of the tank. On Karl's 20l he did not need to do this but I am not sure if the 25l Acerbis needs this mod to allow the tank to fully flow or not. it's not a hard mod from what I've seen but I have never done it myself as my carb was already modified when I bought the bike used. Dino

@Leecifer666 2 жыл бұрын

@@DinosTinkerShed Thanks Dino I was wondering about this myself. The hose does go up slightly, perhaps this is starving the bike? Let me know if you are ever riding up in Muskoka!

@williamrae9954 Жыл бұрын

Too much air getting in...choke puts more fuel in the mix

@mingmingliang Жыл бұрын

The new tank is lighter than the original?

@DinosTinkerShed Жыл бұрын

It is, but I am not sure by how much. Thank you for the comment

@lindsayguitars 9 ай бұрын

Dino, Can you do a follow up video on how Karl’s tank is doing? I’ve read that the Acerbis tank can stretch and start to hit the oil cooler over time. This issue causes the tank to sag and it breaks the outer most spark plug cap. I was wondering if he’s experienced any of these issues since the installation and mods. The Safari tank seems more robust with the brace on the front. I can’t decide which one to go with. I would like to hear your thoughts now that you guys have some miles on this tank. Cheers!

@DinosTinkerShed 9 ай бұрын

I will talk to him about it. He has the smaller Acerbis tank and I do not believe he has had any issues. I wonder if the sagging issue is with their 25 liter tank?

@lindsayguitars 9 ай бұрын

I went back and watched the install video you did for his bike. I forgot that he had the the smaller tank. I believe that sagging issue is only with the 25 litter tank. I think we're going to go with the Safari tank. I just like the idea of that extra brace. Thanks for the great information you've done on the DR650. You channel is awesome! @@DinosTinkerShed

@lifeexpert3053 Жыл бұрын

Hi mate. you can also removal cannisters box

@DinosTinkerShed Жыл бұрын

I don't believe my 2009 has the canaster ☹️ sorry

@lifeexpert3053 Жыл бұрын

@@DinosTinkerShed kzfaq.info/get/bejne/Z6iPbLKX05uZhpc.html

@DinosTinkerShed Жыл бұрын

thank you, ya mine did not come with this canister. I'm not sure if it was never there or just not installed in 2009. Thank you for the link. Dino

@mugmushrooms9845 2 жыл бұрын

I really really recommend a good quality external mic, the sound is low and volume is inconsistent. The video quality is great though.

@DinosTinkerShed 2 жыл бұрын

Thank you for the comment. I have upgraded quite a bit since the fuel tank video. I believe the sound is better on more recent Videos so please let me know. Still a bit of a noob on the video and audio scene. Thank you for the feed back. Dino

@johanenglund1910 2 жыл бұрын

Great video as always! For me the audio is abit low compared to other videos on youtube. Other then that great video!

@DinosTinkerShed 2 жыл бұрын

Thanks John, the audio is the one part I struggle with. I'll boost it up a bit in the future. Thanks Dino

@DinosTinkerShed 2 жыл бұрын

Sorry Johan, looks like auto correct changed your name to john in my last reply. My bad. Thanks again for you feedback. Dino

@johanenglund1910 2 жыл бұрын

@@DinosTinkerShed No worries! Thanks for taking the feedback even though you haven't asked for it.

@davidb5952 Жыл бұрын

Was able to just flip the turn signal brackets 180 degrees on my 2018. Really angry theAscerbis tank shape doesn't allow my huge parabellum windshield to fit any more. I love that huge windscreen and it cost me $250.

@DinosTinkerShed Жыл бұрын

That sucks, what model is the Parabellum? Karl has one on his but maybe it is a different size? Dino

@backwoodsman1753 2 жыл бұрын

For a top-dollar item, plasticware is good, but spoilt by cheap and nasty fittings supplied. No vacuum cap supplied, washers way too small, and seat-clip requires modifications. Next time I'll be looking for a different brand. Also no need to butcher up blinker brackets - they can be simply juggled around to fit OK, even with the added complication of Barkbusters. Also for seat-clip bolts, recommend applying anti-seize or grease, not loctite.

@DinosTinkerShed 2 жыл бұрын

Thank you for your observations, I agree that there could have been a few additional items included for sure. I did not see a way to adjust the turn signals without modifying them, the locator tabs seemed to be a bit of a challenge. I did not have the issue with the seat tab you talk about, I wonder if they changed the design at some point. Thank you again for your insight. Dino

@elego49 2 жыл бұрын

Could it be that the year of the bike has anything to do with the signal lights bracket conundrum? What year DR is yours, backwodsman? I'm on the fence about this modification mostly because I lack the luxury of a garage with a nice workbench and vise. Mine is a 2020.

@backwoodsman1753 2 жыл бұрын

@@elego49 I think no change with the years. Mine is 2019 model. No special tools required to re-fit unmodified blinker brackets, just some thoughtful manipulation.

@michaelhrivnak1719 2 жыл бұрын

Don't know why, but I don't like that name "bush pig". She's far from perfect, but perfectly good in so many ways! So show some kindness guys!

@jabawocki9462 Жыл бұрын

I think its called "bush pig" because it is often used "in the bush" so to speak, and when revving it sort of sounds like a wild hog rooting around in the underbrush. If you look at some of the aussie youtubers who really push the bike you can see how it would get that nickname.

@josephgeorgeejr7039 Жыл бұрын

Hope Carl gets rid of his anchor ⚓️

@mollysmoshingtankcrew9441 2 ай бұрын

I always pronounced Acerbis as "Acer-bis" lol

@jordancullen4135 2 жыл бұрын

All your videos should start with you sharpening something. This will be your signature.

@arnoldschmidt2753 2 жыл бұрын

Man oh man is your audio ever low .Hardly can make out what your are saying from frame to frame .Good video otherwise .

@DinosTinkerShed 2 жыл бұрын

Sorry, I am aware of that, this was one of my earliest videos and I was still working out the sound levels in post. I think my later videos have improved. Thanks for the feedback. Dino

@joshbethel5800 2 жыл бұрын

I find it just fine. Turn your volume up? Wonder what this tank would look like on a street bike. Cb650sc

@tmcsb Жыл бұрын

looks like a good video, but I can't hear f'all

@DinosTinkerShed Жыл бұрын

Yes, this was one of my first videos, I was still learning alot about audio. I do apologise.

@patverry8926 2 жыл бұрын

get real its not far to the cafe to pose

@gotdirt66 Жыл бұрын

Can't hear you. Bro you need a microphone

@DinosTinkerShed Жыл бұрын

Yes, you are not the first to mention this about this video. I was still working through audio levels at the time. I think this was the 15th video I had made lol. I believe I have gotten much better since then. Thank you for the comment. Dino