I NEED YOUR FEEDBACK QUICK! 2024 F450 Platinum $10 Mod

Рет қаралды 7,821

11 күн бұрын

#rv #towing #trucks
BigTruckBigRV LIFE Channel: @BTBRV LIFE
Instagram: / bigtruckbigrv
Facebook: / bigtruckbigrv
Links to many of the accessories I review and use from etrailer!
www.etrailer.com/big-truck-bi...
RV Towing Upgrades
*Reese Goosebox Gen3: www.etrailer.com/Fifth-Wheel-...
*B&W OEM Gooseball: www.etrailer.com/Gooseneck/B-...
*B&W Fifth Wheel Hitch: www.etrailer.com/Fifth-Wheel/...
*B&W Sliding Fifth Wheel Hitch: www.etrailer.com/Fifth-Wheel/...
*Equalizer Weight Distribution Hitch: www.etrailer.com/Weight-Distr...
*B&W Tow and Stow Hitch: www.etrailer.com/Ball-Mounts/...
*Curt Drop Hitch: www.etrailer.com/Drop-Hitch/C...
RV and Trailer Equipment Upgrades
*RoadArmor Suspension Equalizer: www.etrailer.com/Trailer-Leaf...
*HD Shackle Straps and Wet Bolts: www.etrailer.com/Trailer-Leaf...
*RV Suspension Upgrade (travel trailer, Cargo Trailer): www.etrailer.com/Trailer-Leaf...
*16” G Rated Wheel Tire Combo: www.etrailer.com/Boat-Trailer...
*Goodyear Endurance 15” Trailer Tire: www.etrailer.com/Tires-and-Wh...
*Goodyear Endurance 16” Trailer Tire: www.etrailer.com/Tires-and-Wh...
*Furrion Wireless Backup Camera: www.etrailer.com/RV-Camera/Fu...
*Furrion Wireless Side and Rear Cameras: www.etrailer.com/RV-Camera/Fu...
*Phoenix Electric Trailer Jack 4,000 lbs: www.etrailer.com/Trailer-Jack...
*GlowStep Revolution Steps: www.etrailer.com/RV-and-Campe...
*LCI Solid Steps: www.etrailer.com/RV-and-Campe...
*LCI AutoLeveling System: www.etrailer.com/Camper-Jacks...
*Reese Fifth Wheel Dual Motor Landing Gear: www.etrailer.com/Camper-Jack/...
Must Have Equipment!
*6000 Watt Generator Kit: www.etrailer.com/Generators/e...
*3200 Watt Inverter Generator: www.etrailer.com/Generators/e...
*2000 Watt Inverter Generator: www.etrailer.com/Generators/e...
*30amp to 50amp Power Cord: www.etrailer.com/RV-Wiring/Mi...
*LED RV Replacement Taillights: www.etrailer.com/Trailer-Ligh...
*Fastway Tire Chocks: www.etrailer.com/Camper-Jack/...
*RV Foam Sprayer: www.etrailer.com/Car-Cleaner/...
*RV Soap: www.etrailer.com/Car-Cleaner/...
Truck Upgrades
*Airlift 5000 Airbag Kit: www.etrailer.com/dept-pg-Vehi...
*Airlift Wireless Air Controller: www.etrailer.com/Accessories-...
*Access Toolbox Bed Cover: www.etrailer.com/Tonneau-Cove...
*Bedrug Bed Liner: www.etrailer.com/dept-pg-Truc...
*Floormats: www.etrailer.com/s.aspx?qry=F...
*Etrailer.com is the official sponsor of my channel. Equipment reviewed may have been provided by them as part of that sponsorship. All reviews are honest and unbiased. This channel is for entertainment purposes, and you should always do your own research prior to making a decision!
Sponsored items may be in this video. Always research multiple sources before making a purchasing decision. As an Amazon Associate, I earn commission from qualifying purchases.

Пікірлер: 195

@Jason-Hicks 9 күн бұрын

Personally I like it better without the pinstripe because it’s more cohesive with the rear fenders. Plus it’s a cleaner look and it appears on my screen like there’s a panel gap issue with the stripes in place. I hope you guys stay safe during T.S. Alberto.

@brendonnegrete3678 9 күн бұрын

Agree

@nieljones6181 9 күн бұрын

same. i agree

@zombieslayer556 9 күн бұрын

Agree

@justinwright7500 8 күн бұрын

100%

@CarlosHerrera-di2fz 9 күн бұрын

Those little details is what makes things 'pop' I personally like the look.

@tommyaoi1183 7 күн бұрын

💯

@thomassopchak9505 9 күн бұрын

I think it looks good! Keep it.

@mitchellapaul 9 күн бұрын

Looks good, let it remain.

@user-bj1db8up4e 9 күн бұрын

do the back ...do the back!? ~ ~

@sfuoncall 9 күн бұрын

I agree. I like the front and doing the back would really accent the wheel wells in the back.

@Tobymt1925 8 күн бұрын

They are going to take away from your cargo carrying capacity...🤣 Love your videos!

@dennisstoner5079 7 күн бұрын

I like it. It adds a lot in a sea of white, giving some depth and contour to the flairs.

@RVDumpStation 9 күн бұрын

To me the illusion of the fenders coming off is greater than them having a more defining, pronounced look. Sorry.

@davidhopps8714 9 күн бұрын

Looks Great!

@fmg-1084 9 күн бұрын

I think they look great and your excitement at the beginning says you love them. So leave them and forget about pleasing others. Enjoy customization of your new truck.

@Sergioalvarado_96 9 күн бұрын

Looks good. Your right it does help to point out the wide body fender flares.

@margueritestupplebeen2846 8 күн бұрын

I like the pin strip, you can even change them for holiday colors during the year as you have a child.

@txhouse7787 9 күн бұрын

I like it. It adds a bit of contrast and makes the flares pop a little more.

@OreoandRamen 9 күн бұрын

Well, JD, if you do the front, do the back as well and run a black pin strip down the side of the truck. I think if you did that that would really make your truck stand out.

@Dan_BamSR 9 күн бұрын

My vote is to keep the pin stripes there. It makes the truck “pop” just that subtle bit more. Looks better in my opinion. 👍

@willardscott2146 9 күн бұрын

Looks good

@davidharrington7254 9 күн бұрын

I like it. The stripes give just enough accent to an otherwise plain white front end.

@LukeEdward 9 күн бұрын

Well that kind of neat! It’s the little touches.

@TheSadler333 9 күн бұрын

I actually like it. Adds depth.

@slcsak 9 күн бұрын

Looks good! I have color matched Bushwacker flares on my white Ram and they have black edge trims that seal between the fender and the flare which look like your vinyl add ons. Keep 'em and do the back too.

@TheBurnsStuff 9 күн бұрын

That's such a small thing to do and it really makes it look more trimmed out. I like it.

@anthonyroberts9034 9 күн бұрын

It looks much better, yes ! What about the Rears ?

@alexspurlock3727 7 күн бұрын

I like it more WITH the pin stripe. Makes the front look more beefy. Keep it

@russthompson7994 8 күн бұрын

Stormtrooper Super Duty! I like it.

@davesauerzopf6980 9 күн бұрын

100% love it. Agree with other saying do the back as well. Add a chrome big protector on the hood as well. I am also a big fan of PPF and I had my entire front of the truck wrapped, including the headlights. Hood, front fenders, front end, and headlights. Paint chips on a white vehicle stand out a lot.

@MichaelCarter-pq9me 7 күн бұрын

It is different, However, it’s your truck do with it as you want I think it makes the truck look good .

@williamarmstrong9970 9 күн бұрын

JD, keep the pin strips and do the same on the rear fenders!!! It will look GREAT.

@anthonyrider9190 8 күн бұрын

I agree, makes it pop. Little detail goes along ways.

@donaldwright1730 4 күн бұрын

I think the pinstripe looks good on there!

@mhawrysko 9 күн бұрын

It looks good with the pin striping. I'd keep it. Your truck is sharp, I'm a RAM guy but like your Ford alot!! Very nice!!! You almost need them on the rear fenders too.

@melendyladyboykin2482 9 күн бұрын

I love it personally. Keep it.

@seagullsbtn 9 күн бұрын

Noticed that and the subby antenna. Keep it. Lets see how well it survives in the wild, with usage and car washes.

@gcslade 6 күн бұрын

It definitely makes the fenders standout more and not be lost in the truck. I'm a GM truck guy and had the OEM black fender flares on my tri-coat White 3500 HD and didn't like them in black. I recently had the Fender flares painted to match the truck, but now they don't stand out as much. I'm going to add a the small black pinstripe to see how it looks...

@lukeduke3077 9 күн бұрын

I love the look of that pinstripe. It makes a big difference

@keithasche 8 күн бұрын

Personally didn't even notice that right away. Kind of like it. I do agree with some people that I think the back could use it too just for consistency. I think it also looked good to put black lettering inside the super duty on the hood.

@bradleymanning3225 8 күн бұрын

I agree with the Black lettering inserts. I also did the letters on the Tailgate

@bradleymanning3225 8 күн бұрын

But I don't have a Platinum

@texillini1 7 күн бұрын

I didn’t notice it until you pointed it out. Looks nice.

@RLivingston917 8 күн бұрын

Looks good. 😎

@drivinolered5835 9 күн бұрын

I like the clean look personally. I panned the video to the two looks back and forth several times and can objectively say I like it without the pinstripe.

@dmhipkins 9 күн бұрын

Looks ok, but what matters to you, is what matters. :)

@rvingandtheopenroad 9 күн бұрын

That’s funny, I stared at it and thought maybe you added fender flares. I rewound it, looked and said nope same flares. So, I didn’t cheat but I did at first think you added fender flares so I agree with the guy who gave the tip. It’s minor but I’d keep it

@kvboyd 9 күн бұрын

Look good. I got a platinum and will be doing this also. It breaks up the white.

@tommyaoi1183 7 күн бұрын

Add some 90's KC Lights. 😗😗 That will make it stand out. 🤭🤭😊

@barrytobias6921 9 күн бұрын

I like it better without the pin stripe but it’s your truck so make it your own by doing what you like.

@ryanmcgowan3061 5 күн бұрын

I immediately thought the difference at first was added fender flares. So it certainly had the desired effect.

@bsittig 3 күн бұрын

Flame red truck with electric blue pine strip right there: sick. Any contrasting color pin strip right there, yes. Bc it a huge factory (not added with screws) flare and seamless with the rest of the quarter panel gives a signature of depth to that stance. I would do that. And a light up ford emblem. Lights on the steps. That’s it. Not too little. Not too much.

@ChrisBrown-ti5tr 9 күн бұрын

Looks great and very subtle

@asgoodasitgets1 3 күн бұрын

Your truck is amazing! IMHO I would remove them. The reason is they do not coincide with your rear wheel fenders and it does clash. Your statement about the front fenders looking like there is a gap is correct. Keep up your videos, I enjoy them!

@mikehuck9518 9 күн бұрын

Looks Good !👍

@Captain-Awesome 9 күн бұрын

I like the clean look, remove the pin stripe. That’s my vote.

@deadfrogracing7943 8 күн бұрын

I think it looks good with them. It defines the wider fender.

@Super_Duty_Limited 9 күн бұрын

Looks Awesome...!!!💯🇺🇸💯💰

@dean3471 8 күн бұрын

I think it looks good!!

@chrisbuxton2778 9 күн бұрын

Matches the line of the hood so ok

@willb3018 9 күн бұрын

Looks fine. Keep it. You could have considered a red stripe as well to tie in with the high output Powerstroke logo. But I'm thinking the black may look better.

@jamesaldi9558 9 күн бұрын

Looks good.

@charlesahon 9 күн бұрын

I like it and would like to see how tha back looks.

@alphaq3427 8 күн бұрын

I like it. probably wont do it on my f450, limited but I do think it looks cool. I hit the rv dealers all the time thinking one day we will run into you. lol. love the videos.

@eugeneenslow8563 9 күн бұрын

It's subtle enough to leave on imo.

@briandesrocher6882 9 күн бұрын

The minute you stepped back.,,,, like WOW I never would have thought To do that…. (With painted flares obviously) did you only do the front? Also please please think of a (vinyl two strip old school pin strip down each side. Red on white with the red 6.7 emblem. Very subtle and being vinyl you can always peel off.

@shawn2296 9 күн бұрын

Honestly if you didn't point it out I wouldn't have noticed But it looks good.

@markreams3192 8 күн бұрын

Keep ‘em

@user-ce4gb9nm6q 9 күн бұрын

Put a paint matched ranchhand front bumper on it

@toddrose1418 8 күн бұрын

I Like It, Looks Good!

@G.I.JeffsWorkbench 8 күн бұрын

Since you asked, the stripes are a nice subtle detail. My only problem is that I’ve never haggled good luck with decals on work trucks. Sooner or later decalsend up looking ratty. But i guess for $10 you could just put new ones on - or have the stripe painted on.

@tadred1 7 күн бұрын

I think it looks like you have a gap between the fender and the fender flare. From a distance it looks similar to the hood gap. And if you are not going to do it to the rear I would not do it up front.

@mountainman540 9 күн бұрын

I like them. I wonder if it keep the dirt off the sides

@garyi8608 9 күн бұрын

It's nicer without the vinyl narrow piece going around the front fender flares.

@TheRamblinDude 7 күн бұрын

I have a 2024 Limited F-450 in Carbonized Grey. I think I will go without the pinstripes. They don't look bad, up to you, just really don't do anything for me.

@user-fy4su1kq3n 8 күн бұрын

Congrats on the new truck. My new f450 came in recently and went last Saturday to pickup and compressor went out on ac as I left the car lot so it was a not so good day and of course there on back order so they took one off a new f250 and just got it on today. There going to be delivering it to me Monday pretty excited to get it been waiting along time to get it

@jamesbass9797 9 күн бұрын

Looks alright JD. Leave them on. In fact, you should put them on the back of the truck as well. See how it looks then.

@waliotukosea2992 8 күн бұрын

Awesome JD. up here in Canada we like. Keep’em.

@electricamish 8 күн бұрын

Personally I like that they blend with the truck, they look like less of an add-on....that stripe does make it look like another parting line , going with the hood to fender, but like everything personal, its up to the persons taste.

@mauriceracicot6010 8 күн бұрын

It sections it out, nice look!

@kenpolzel412 8 күн бұрын

Looks good leave em

@davidtripp3470 9 күн бұрын

In my opinion, it makes the fender flare look like add on after market ones with the gaskets. The major thing I like about the 450 vs 350 is the added fender flare from the factory and not having to add them. I'd leave it on for now, but I think it looks better the way it came.

@otiskey166 9 күн бұрын

Your last statement says it all "makes the fenders look a little more pronounced".

@islandbouywalker1917 9 күн бұрын

Keep 👍🏾

@EckdahlWrestling 8 күн бұрын

It makes the fender flares look like aftermarket, bolt-on flares. I like the idea of ways to emphasize the flares, but this just looks like the gap between body panels. Remember, contour is defined by shading/shadows, not bold lines.

@smonroeh 9 күн бұрын

Looks fine. Maybe some pinstripes down the length of the truck

@justinkneisel2165 7 күн бұрын

Love the pinstripe!

@varneyice 9 күн бұрын

I like it it's cool

@ranseposey999 9 күн бұрын

The pin strip looks good and makes since. I think you need the pipe grill and winch like you had on the 2017. That looked assume.

@momranger2010 9 күн бұрын

I love it!

@garyneighbors5525 9 күн бұрын

I like it !! Go for it

@michelleekins1406 9 күн бұрын

Keep it!❤

@Kevin-midmichigan 9 күн бұрын

Try the rear also

@aaronhendrickson 9 күн бұрын

Looks good. How about the back finders?

@bparkinson1234 9 күн бұрын

Hey put this on my 23 white superduty. Looks great. RealTruck AVS® AeroSkin II® Matte Black Bug Shield

@tommcnutt2582 9 күн бұрын

What about a chrome stripe? Bling!

@ronaldspins 9 күн бұрын

Looks good .... is tasteful

@scottaylward3670 8 күн бұрын

I like it do the back also

@mikemccabe7124 9 күн бұрын

they used a special gasket back in the day on the stepside beds of chevy's like my '72 cvhevy stepside so the body panels wouldn't rattle & for other reasons I'm sure if they came loose or something.. it was like a 1.5"-2" flat gasket and the outside had a small round bead to give it a clean gap filler look similar to that like u now have with the vinyl sticker.. also the older Volkswagen bugs from '59-'64 I know used the same thing in between where all the front and rear fenders attached to the body/cab shell just was much smaller but same exact look and function now I'm not sure if the fender flares attach to the fenders as a 2 peice type if deal or if the fender and flares are molded making the f450 and f550 a true 1 peice fender which im guessing is why the use of vinyl to get that same clean yet subtle look which I agree it makes it pop a little and gives it a cleaner look vs not having it.. so I say i.m.o. i like it keep it on there

@mikemccabe7124 9 күн бұрын

I say also if you didn't do the rear dually fenders to then you should so it makes the truck more uniform cuz I'd the fronts done but the rear isn't my eyes will catch it and wonder why you didn't do it to keep uniform and continue on with the flow/look all the way round the truck instead of just half azzing it because with the front done but not the back it technically is half azzed so I say do all 4 corners