Install front Supermoto wheel.
Рет қаралды 32,057
7 жыл бұрынHow to install a supermoto front wheel with oversized 320mm rotor.
@gels2609 3 жыл бұрын
Just wanna let you know I'm here 4 years later using this as a guide right now
@KhanhZui 4 жыл бұрын
very beautiful wheel ::)
@jerrymarksful 6 жыл бұрын
huge help... thanks
@Whowntswat85 3 жыл бұрын
On my drz do i use my oem spacers or they come with?
@jimmyandersson5135 6 жыл бұрын
nice video.. now i just need one for a ktm 525 and i MIGHT be able to do it... im in this dilemma right now...
@bradleythomsen3083 5 жыл бұрын
Thanks. Great how 2. Seems weird there's slack between the forks and spacers. I understand the forks shouldn't be pinched, but does anyone know how much distance between the forks and spacers is acceptable?
@Motoxindustries 5 жыл бұрын
The wheel is tight between the forks and the forks are not pinched. They are parallel all the way down from the clamp.
@crcmoto3751 7 жыл бұрын
Just got a set for my E model. Not my first motard set-up but it is my first time installing a front wheel with a 320mm rotor. Man what a pain in the dick. Thanks for the video. I also noticed that I'm going to have to run the brake line on the outside of the fork. Not too happy about that to be honest...
@Motoxindustries 7 жыл бұрын
Mister Motard most SM setups run the brake line in the outside of the forks. You can get a longer brake line to keep it on the inside but run the risk of the hose rubbing the tire. Keep in mind. Your changing your bike from the original purpose. There may be modifications that need to be made. On this drz we tried both routes for the brake line. The inside worked but it did have to be pulled into place because it made the line a little short. You can looses the bracket that holds the brake line in the fork and pull the line down to give a little slack. Thanks for checking out our video.
@Jimo368 6 жыл бұрын
What if I want to use my existing speedo drive, and what about the kickstand?
@Motoxindustries 6 жыл бұрын
Jimo368 order the speedo drive front hub. It comes just like your stock hub with the tabs. Ours still worked with the stock kickstand.
@Jimo368 6 жыл бұрын
Thanks Motox
@XenoRacing 5 жыл бұрын
I've never seen non spoked wheels on a sumo, is this common or just like a cheaper alternative at the cost of more mass?
@Motoxindustries 5 жыл бұрын
They are actually more expensive than the standard spoke wheels. They weigh about 1 1/2 lbs more.
@VitaliyKhomich 5 жыл бұрын
They give way more stability in corners then cheaper spoked wheels
@bradleythomsen3083 5 жыл бұрын
@@VitaliyKhomich false. Spoked wheels are superior. More give, stronger, and lighter. Edit: perhaps your key word was 'cheaper.'
@lifeoutdoors3953 4 жыл бұрын
They are tubliss that's why
@nico1001s 6 жыл бұрын
Where did u get the kit from ?
@Motoxindustries 6 жыл бұрын
nicolas martin we sell them on our website. Thanks for looking.
@generconsumido1170 4 жыл бұрын
Possible to use tire 150x70 r17 in my rear.
@Motoxindustries 4 жыл бұрын
Yes there would be plenty of room for the 150/70
@desertrider325 5 жыл бұрын
What’s the torque spec for the axle?
@Motoxindustries 5 жыл бұрын
The manual says 30.5 ft lbs. We put our at 30. Thanks
@desertrider325 5 жыл бұрын
MotoXIndustries.com is that front and rear?
@Motoxindustries 5 жыл бұрын
@@desertrider325 that is for the front. We put the rear at 55 ft lbs.
@86cadaver 7 жыл бұрын
So wheeels can fit to the e models forks and swing arm
@Motoxindustries 7 жыл бұрын
Marcus Lopez Yes they do fit. The kit comes with the correct spacers for the E model. works great.
@86cadaver 7 жыл бұрын
MotoXIndustries.com damn that's sick! I'm gonna do it
@Motoxindustries 7 жыл бұрын
Marcus Lopez sweet. Make sure to use code R6REALTOR when you checkout for a discount off your total order. Thanks for looking.
@rolandorafawijaya9964 5 жыл бұрын
Bad works :'(
Offlimits Supermoto
Рет қаралды 1,6 М.