How to Build an Off Road Wheelchair (From 2 Electric Bikes)

Рет қаралды 939,843

5 жыл бұрын

Watch Cambry ride her Off Road Wheelchair for the first time HERE: • Homemade Off Road Elec...
Building this fully electric wheelchair was super fun, and surprisingly simple. A few bars of metal tied into the already naturally existing supports and holes on the bike makes for a great seat supports. This Off Road wheel chair has a top speed of 20mph and a range of about 20 miles. The bikes I used cost about $1400 each, So after factoring in the $50 dollars worth of metal and random odds and ends, the whole thing cost about $3000 dollars to build. Which is less than half the price and twice the performance of other off road wheelchairs on the market right now.
See the new 'off road wheelchair HERE: • This is 'Not a Wheelch...
Check out Cambry's instagram here: / cambrykaylor
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
Snapchat: bit.ly/1UAb2Fq
GooglePlus: bit.ly/1YyKice
Awesome Smartphone Tool Kit: amzn.to/2idLGDi
LARGER tool kit: amzn.to/2DURcr7
Green Pry tool: amzn.to/1Tu57pI
Metal phone opening tool: amzn.to/1WdOFv0
Customize your own Tesla Here: ts.la/zack10701
The camera I used to film this video: amzn.to/2p7GtkX
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: amzn.to/2joH00G
Music is from HERE: share.epidemicsound.com/pcGGf
TO SEND ME STUFF: See my P.0. Box on my 'About page': / jerryrigeverything
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

Пікірлер: 1 900

@PreenonHuq 5 жыл бұрын

You can tell Zack has grown up extremely humble. It’s awesome to see such a selfless person use their skills to help people.

@i.sirius6204 5 жыл бұрын

Preenon Agreed, right on!

@miri669 4 жыл бұрын

His future wife :D

@brittonfugatt7849 4 жыл бұрын

Zach, my mom was paralyzed last July with a T4 injury and I teared up watching these videos. THIS IS AWESOME! Oddly enough I'm a mechanical engineer and you sir, just gave me my next project. I designed and built the fully custom chassis, suspension, brakes, and steering for my senior capstone project in college (SAE Baja) so this is right up my alley.

@coztac1991 4 жыл бұрын

Please make a video, in even more detail!

@grandprixuse 4 жыл бұрын

Yea, make a video out of it, given the reason for it, you’ll probably get a channel started easily

@PhoenixBlade538 4 жыл бұрын

I’d also love to see a vid made of you do this! My dad has MS and I’d love to build something like this for him, but I barely even know where to start (I didn’t study engineering in uni, whoops haha)

@TheBacontarian 4 жыл бұрын

You can probably cut down cost alot by using front wheel electric bike conversion kit and weld own frame from some tubing. A tricycle design might be better if you don't need super offroading

@hayhaysorbonash8188 4 жыл бұрын

@@grandprixuse Have toh started the channel?

@anakinskymonke3670 5 жыл бұрын

Agent 47 is such a nice person. He is one of the most humble youtubers out there

@nelsona.penoljr.2433 3 жыл бұрын

Wdym, Agent 47?

@anakinskymonke3670 3 жыл бұрын

@@nelsona.penoljr.2433 Agent 47? search it up

@muhammadistigfarid 3 жыл бұрын

Agree

@jobless_wullie 3 жыл бұрын

Then he snaps the girls neck and lobbed her off the cliff no one seen a thing 😂👍

@Dackered 2 жыл бұрын

@@jobless_wullie r/cursedcomments

@Pwn3dbyth3n00b 4 жыл бұрын

Oct 2018 "I met a girl a few weeks ago." July 2019 "We're getting married"

@filippoforni6781 4 жыл бұрын

Are they really?!

@sameer5383 4 жыл бұрын

question is, where do we fit in this relationship? :( :( :(

@Pwn3dbyth3n00b 4 жыл бұрын

@@filippoforni6781 they're married already homie. Check out their new video of him installing an elevator in the new house they moved in together with, rocking the wedding rings

@Pwn3dbyth3n00b 4 жыл бұрын

@@sameer5383 we're viewers that provide his livelihood :)

@filippoforni6781 4 жыл бұрын

@@Pwn3dbyth3n00b Wasn't this decision too rushed?

@techbaiter 5 жыл бұрын

The Jerry we all know was a *teardown guy* but the Jerry we are seeing now is a *parts joining guy* ❤️ Respect for you in my heart has increased a lot❤️😊

@IhsanNurhidayat 5 жыл бұрын

Ah.. that's sweet. Who's Jerry?

@techbaiter 5 жыл бұрын

@@IhsanNurhidayat offcourse zack !! And I call him as Jerry coz he is so sweet😊😉

@nofckyou4564 5 жыл бұрын

@@IhsanNurhidayat bitch lasagna

@WatchThisBefore 5 жыл бұрын

I totally think it would be a sweet JerryRigEverything product. Anyone else?

@joice175 5 жыл бұрын

Agreed !

@melissaco.8392 5 жыл бұрын

Totally agree

@MasterO0gway 5 жыл бұрын

That could be interesting :D

@konstanen 5 жыл бұрын

Expensive as fuck :))

@jody024 5 жыл бұрын

Yup. If he can find a way to use less expensive bikes. And use thinner tubes for the framed seat, it's probably pretty heavy.

@josephgresick3886 5 жыл бұрын

As an electrical engineer, have you considered putting slim alternators/alternating current generators in the wheels so while she's burning current, she's also building back potentially double the current. If you are able to send me the figure you have for the battery output, RPM, actual range, and wheel size, I'd be happy to do the math for you. Then either you can do the work, or I can build the product (probono of course) so Cambry could have either a much extended range, if not a nearly unlimited range if the mathematics are correct. Zach, please let me know what you think, assuming you haven't already figured this type of process out. I sincerely hope you see this message, for both you (love your channel) and Cambry. Like you, I love helping people overcoming obstacles. If you see this, please allow me to help you.

@satriadewa3747 5 жыл бұрын

Let jerry see this guys

@Arda.D 4 жыл бұрын

Robert J Gresick III Jerry must see this, thanks Robert

@quicktingz2097 4 жыл бұрын

Baldy must see this message

@alessandromorelli5866 4 жыл бұрын

Either you know something that Tesla doesn't know or that for some reason not explained in the comment can't be fully applied to cars...like, regenerative breaking exists, but there's no way it can output U N L I M I T E D range.

@syedshufkatali6585 4 жыл бұрын

@@quicktingz2097 Baldy?

@prav1102 3 жыл бұрын

I have to say you're one of a kind , gem of a person who would go out to build something custom to bring joy into someone's life whom you have not known for a long time by spending so much time, effort, planning and money to put together something like this. I am really glad and happy that you guys have met each other , you both make a great couple.

@WeirdSeagul 5 жыл бұрын

you should put somekind of mudguard on the front wheels. she is sat lower than a regular bike

@johnphillip1711 5 жыл бұрын

I'd put them all around especially if using on snow as the rear wheels can kick up a fair shower of water /mud etc

@quentinalsip2084 5 жыл бұрын

My daughter has spina bifida, she's 3, and I can't tell you how awesome seeing something like this is! I watched Cambry's video that you linked in the original video as well. Her story is very inspiring and it was nice to hear some of the things my own daughter will likely go through as she matures and grows up dealing with her condition. Thanks a million for this!

@petercallaghan9851 5 жыл бұрын

I've been disabled for 19 years - leg amputee. Boy, could I use one of these!

@rafaellaverde4889 5 жыл бұрын

@jerryrigeverything lets all pitch in and get our friend one!!!

@foewilla7790 5 жыл бұрын

You and me both..

@geis990 5 жыл бұрын

Peter Callaghan i hope you get 1!

@whatsupdocchemdog5994 5 жыл бұрын

I'm willing to help. Say the word I will pitch in $$ to help. I'm a disabled veteran myself so I know what it's like. Willing to help any person who needs help.

@petercallaghan9851 5 жыл бұрын

@@whatsupdocchemdog5994 That's very kind of you but it would all fall into the "too hard" basket for me. I'd rather see something like this go to a younger person who could get some real practical use out of it.

@TheJurgys 5 жыл бұрын

As if you haven't earned your channel name yet... I'm trying to think of something you CAN'T jerry-rig. This is freaking dope

@georgewayt3129 3 жыл бұрын

Name the bike after the girl you built it for.

@solbemol2580 5 жыл бұрын

8:51 "Is that supposed to be on fire??"

@odaiculadracucujoculas6623 5 жыл бұрын

joc jocuri you are romanian? And me

@giacomobongrazio 5 жыл бұрын

You're not the hero we deserve, but the one we need right now.

@Toxic_Waste92 4 жыл бұрын

You should add a battery bank under the seat to increase the overall range of the bike. The Tesla of wheelchairs!

@laurentd.4473 4 жыл бұрын

Disabled people around the world will be happy if this will be commercially built ! Greetings from Belgium !

@umutsahin6822 4 жыл бұрын

they are going to release it this summer, commercially

@spec-opsmexican4119 4 жыл бұрын

umut really?

@hiteshadhikari 3 жыл бұрын

You can buy it now

@johanndeale9365 3 жыл бұрын

@@hiteshadhikari Where and how much ? Thanks in anticipation.

@hiteshadhikari 3 жыл бұрын

@@johanndeale9365 he made a site for it NOTAWHEELCHAIR its called. You can check it out

@TheCoxClan 5 жыл бұрын

Super awesome! Love this kind of stuff

@JerryRigEverything 5 жыл бұрын

Thank you!

@manojshrestha3610 5 жыл бұрын

Simple Creativity

@justoncheney7172 5 жыл бұрын

This is awesome! Great work! One thought that came to mind for me is.....that looks hard to get into. What if you replaced the seat you made, with a way to connect the wheelchair. Obviously that'd be a bit of a challenging to figure out, but if the wheelchair could be the seat, and then they could unlock the wheel chair and roll away without any help. And if the bike died, they wouldn't be stranded, they'd still have the wheel chair.

@kushonvybez 5 жыл бұрын

@@JerryRigEverything Hi Zack, you could also consider adding the suspension to the seat rather than the back wheels. Some springs between the seat and frame would add some comfort while still maintaining the same bike design

@neoncity1557 5 жыл бұрын

Modify just a little bit *Immediately transitions to cutting off the chain*

@FEARmeify 5 жыл бұрын

That was pretty dumb honestly. It's unnecessary to destroy the chain in order to remove it.

@lylestavast7652 5 жыл бұрын

@@FEARmeify Artistic license :)

@FEARmeify 5 жыл бұрын

@@lylestavast7652 This isn't art and I stand by my claim. What he did was completely unnecesary.

@ScottR10 5 жыл бұрын

Lol...he prolly got that, but so what? Not the end of the world, dude.

@FEARmeify 5 жыл бұрын

@@ScottR10 No one said it was "the end of the world", just that it was dumb and completely unnecessary. It's even easier and cleaner to take the chain off without breaking it.

@rugvedtipare4005 4 жыл бұрын

1:24 Zack cuts the chain off Master link: Am I a joke to you

@andrewc3015 3 жыл бұрын

Did it have a master link?

@wferran4107 2 жыл бұрын

@@andrewc3015 Most chains do, and all electric bikes do.

@happyfoot6771 5 жыл бұрын

I actually started crying just thinking about the possibilities and access this would give me.

@sivakumarkottayil 5 жыл бұрын

Now that's something special Love you Zack 😍😍😍 Will there be a durability test for this one 😁😁😁

@papercut._. 5 жыл бұрын

Will*

@sivakumarkottayil 5 жыл бұрын

@@papercut._. Thanks for the correction. I didn't notice it.

@nishantjain7051 5 жыл бұрын

But from this we'll know his heart and his support for differently abled is pretty durable ♥️

@PhilDogg 5 жыл бұрын

Sivakumar Kottayil his name is Zack not jerry

@sivakumarkottayil 5 жыл бұрын

@@PhilDogg Got it

@torinicolette6490 4 жыл бұрын

Being in a wheelchair myself, this thing is a dream! You’re awesome 😁

@manishmehra1596 4 жыл бұрын

@MsAlisonWunderland 10 ай бұрын

Brilliant idea. I’m 80 years old and looking for an off road wheel chair to get me up the hill behind my property to my cabin. I’ve looked at quite a few but they are either way too expensive or probably not powerful enough. Years ago I built a 4 wheeled horse drawn Phaeton with Ackerman type steering with coil spring suspension and wide tyred bicycle wheels. I was thinking of electrifying it until I saw your videos, thank you so much Jerry.

@randypandolini6506 Жыл бұрын

Wow im a 65 year old woman and love to watch things being built, and this bike is fanatic. I wish i had the talent to make things like this. Bless you. Keep it up.

@marco704 5 жыл бұрын

Why you didn't connect the two motors to just one accelerator? And maybe if you turn the brake levers of 180 degrees she should be able to break with more "power"! One other thing, with the 18650 batteries you'll be able to build an another battery pack (connected with the two original batteries) that will fit under the seat to increase the autonomy! This is such a good project, good job! (Sorry if my english is bad, i'm Italian ahah)

@SteefaTak 5 жыл бұрын

Thanks for the coment i was thinking the same. Its very easy to put in a bigger battery than instal the solar nonsense.Sorry for my English i am Czech :)

@meshechyawan 5 жыл бұрын

Was thinking the same thing, couple the front and rear brakes separately and have the two consoles integrated together close to the seat. And also you could have a single handle bar connected in parallel to the two for easy turning. Excellent work zac👌👌

@72mardy 5 жыл бұрын

I agree with all these comments. A single throttle for both would be safer and easier to drive....but in saying that it might make tight turns difficult because both powered wheels are pushing at the same time, like with a locked diff in a car. Definitely flip the brake leavers to the bottom of the bars, and connect both front brakes to one and both rear brakes to the other. Or....all brakes to one leaver as I don't think independent front and rear braking would really be needed on a machine like this. Hydraulic brake calipers could be used in conjunction with a simple 4 way distribution block being activated by a motorcycle hydraulic brake leaver so it has enough pressure to operate the 4 mountain bike calipers. I don't think one mountain bike leaver would have enough pressure. And yes...plenty of room for extra batteries 👍 Dual suspension would be so much more comfortable, as many people have said but will be a challenge.mounting the seat section. Cheers.

@Max_ellis74 5 жыл бұрын

I can understand all of you

@klepow 5 жыл бұрын

It would need some sort of differential control, for cornering. This may be a little less user friendly, but it's probably easy enough, to get used to. It could have advantages, to control the traction of each drive wheel separately, in off-road conditions.

@mralabbad7 5 жыл бұрын

What about the scratch test Maybe it's made of Sapphire?!

@bryanjudefernandez2195 5 жыл бұрын

sadly no headphone jack

@johnnguyen4700 5 жыл бұрын

It passed the bend test tho

@bryanjudefernandez2195 5 жыл бұрын

pretty large battery capacity. will last a long time on a single charge. for real tho

@jaumegenaro7673 5 жыл бұрын

*with deeper grooves at a level 7*

@lawrencemamithi9088 5 жыл бұрын

Same material as pixel 3 back cover

@smartyalex4296 4 жыл бұрын

If This would be commercial, everyone would want this. I'm not disabled, but I would totally make/buy this and use it EVERYWHERE! Thanks for the inspiration!!

@broken55muffler31 5 жыл бұрын

Thank you... i been working as a caregiver for 5 years.. i have my patient and been wanting to do something nice for him.. and this.. this is something i can definitely do!!! I will send you pics once I begin!

@ykd0011 5 жыл бұрын

Who can dislike this, who are they. People will always have something bad to say even at your best.keep up the good things. Totally liked it. including that reverse slow motion.lol.peace...

@chrissnaproll26 5 жыл бұрын

Only a CLUELESS TWAT can dislike this

@markush7 5 жыл бұрын

Disikes are pretty irrelevant anyways

@markush7 5 жыл бұрын

Dislikes don’t affect his revenue

@NoName-jz4lc 5 жыл бұрын

0:38 Papa Jerry i don't feel so good...

@pd1769 5 жыл бұрын

Jerry is Thanos confirmed

@jordanmorgan3440 5 жыл бұрын

Who is jerry?

@ikonikian475 5 жыл бұрын

*turns into phone dust*

@joelongstaff7601 5 жыл бұрын

Sir it's nice to see a video that I can show our kids and say 'look there,that's what good folks do" your a great insperation. Thank you for sharing. Makes me realize we should all do more for folks.

@lights80088 5 жыл бұрын

Man, you did one heck of a job. I can't tell you how impressed I am with your creativity. Such a nice thing you have done for her. Thank you for sharing with all of us.

@SuperDataSafe 5 жыл бұрын

Fantastic project, my wife would love to have that superbike. :-) When using "akermann steering", you have to keep in mind that inner wheels run in a smaller circle relative to the outer wheel. A small angle on each side can solve that problem.

@ajaylong2964 4 жыл бұрын

What i like about you is .. you explain everthing .. and thats what i call awesome.. perfect youtuber 👍👍👍👍👍

@bobbywong9392 4 жыл бұрын

The bike you designed and built for Cambry is beautifully done and shows you have a heart of gold. I've got an ebike, built from a front wheel conversion kit, a stock off the shelf walmart bike and a 48 volt (very heavy) SLA battery.

@Vested_Investor 4 жыл бұрын

The simplicity and effectiveness with which you integrated the steering of the two bikes is genius! Given the application, I'm kind of surprised you did not tie the head tubes together? Congratulations on you success and God bless your compassion!

@acoffeewithsatan 5 жыл бұрын

Trying to make a girl fall in love for you the true Jerry-rigged way!

@ronen124 5 жыл бұрын

6:04 to my opinion one throttle should control both motors to the same velocity - it's easy to achieve, same goes for the brakes that should press the rear disks both at once

@cioltra 4 жыл бұрын

But it will be difficult to turn, because both weels will spin at the same speed ! (2 throttle acts kind like a Differential !)

@drevnykot 4 жыл бұрын

@@cioltra it will be ok As it will be joint by throttle which od effectively power output % and not actual wheel RPM If throttle would directly control RPM then IT would be whole other story

@TheAxone15 4 жыл бұрын

It is impossible to brake with several disks at the same time, there's only one cable in each lever if it's a cable brake. But I don't know if it could work with hydraulics brakes

@drevnykot 4 жыл бұрын

, most of them are in fact dyi but you can either get a double-line brake handles or brake line splitters

@danura2535 4 жыл бұрын

@@cioltra also known as tank drive controle

@sharonstuebi8181 5 жыл бұрын

Wow! I have no Idea how I found this but am so grateful!. Im 65 in a manual wheelchair living in Peru. My very expensive wheelchair just shook apart on the dirt roads and cobblestones. Had to have it welded together so its not able to break down for travel anymore. This would give me so much independence ! whoo weeee! Im going to see if my welder wants to tackle it!Because i need to transfer with crutches and cant lift my legs, I would put a Tube that holds my crutches and the front brace would need to open so i could back into the seat. I think i want an " office chair " like seat for more comfort installed with heavy duty springs on top of your flat welded seat. Incredible design! Thanks for sharing the build plans! I subscribed and will let you know how it turns out!. I just bought a donkey to pull a cart thinking that was my only option ! This is WAY better lol

@econ2566 4 жыл бұрын

Did you attempt it? How did it turn out?

@sharonstuebi8181 4 жыл бұрын

@@econ2566 not yet. The donkey is working out great and i hzve a wedding comming up for my son. But we want to try it! I will keep uou posted

@lisagirl5027 5 жыл бұрын

Searching the internet for diy ideas, needing some self assist ideas to my husbands manual wheelchair, and came across this. We are traveling to Europe next year, for a spinal cord procedure and was hoping to make him something that would help a little, so he's not 100% reliant on the manual chair. Too hard to take a full electric chair (which he only uses for yard work anyway), but not sure what environment we will be encountering while we are there. Thanks for the ideas! This isn't exactly what we need, but it gives me some great ideas! I'm grateful for people like you that care about people like her, that sometimes just need a little helping hand.

@nishantjain7051 5 жыл бұрын

Kind and Noble work. Really appreciate it man . Respect earned 😀😍

@danw5157 4 жыл бұрын

Cool bike, great idea. The only thing I would suggest is using aluminum tube and plates. Much lighter = longer distance. Also lighter to transport.

@46B3x2you 5 жыл бұрын

Excellent job. I had been thinking about making an electric wheel chair, but I was looking at it more from taking a wheel chair and adding the hub motors, controllers, batteries, and all. It's brilliant that you came at it from the angle that you did. Your ideas is much stronger and to cool factor is over the top. Really nice job. She must be thrilled.

@Doc7774468 5 күн бұрын

I'm gonna have Me Son one of these. I've been wanting one like this for a long time. Now 65yrs old and disabled and have a power chair that just doesn't do it for me outside. Thanks for the informative videos! Peace

@cb1677 5 жыл бұрын

I want to see an upgrade video where you add the back shocks, a reverse function (for minor crashes and backing up), and an e-brake. Great job!

@NuhanHidayat 5 жыл бұрын

Whatta great project Zach! and Cambry seems to like it a lot 😁 i like her she's cool, at first i was little bit worried about the stability but it looks fine i guess 🤷🏻‍♂

@yvonnepaulovicqueen1677 5 жыл бұрын

Kambry is a BOSS LADY! You are a good guy for building this for her. You may not like this statement but we need heroes. To me you both are just that! I will defiantly share this video!

@mechanictaft4848 4 жыл бұрын

I just want to say ive had a few really bad days and then i watch this im so glad there is someone good left out there cause ive lost most of my faith thank you are one of the good ones

@danehrencrona4847 5 жыл бұрын

I love how Zack all calmly asks "Is that supposed to be on fire?" after welding.

@philipmrch8326 Жыл бұрын

Yes that was quite hilarious. He didn't freak out or anything. He is always so calm.

@davidfoster6554 5 жыл бұрын

Just watched your unveil video.. All I can say is thank you for doing this... And if I had to name this for her it would be Freedom...

@Mr.ElPelonLeoos Жыл бұрын

Congratulations! I'm disabled and have been looking into these too, I can walk but just can't go too far I use a four wheel walker, I want one! Because it's hard being crippled & going outdoors!

@goteeguy7077 5 жыл бұрын

that is so awesome, my niece was in a extremely bad wreck a few years back that almost cost her life , sh is paralyzed from the waist down and this is something that would really help her to get around more, would love to build this for her but money is really tight , thanks for sharing this with us!

@walterwhite44_ 5 жыл бұрын

Great video. Keep up the good work👊🏼👊🏼✌️

@redwan_lmati 5 жыл бұрын

Respect for what you did man, you deserve everyone's respect on this planet ❤️

@shamshadansari1765 4 жыл бұрын

You are such a creative and loving person. Respect for you bro

@imbored_104 5 жыл бұрын

You should definitely upload more videos like this one here! I don't really like watching these types of videos, but from you is a different story. Plus i could learn abut this type of stuff if I want to have a project of my own. Great video!

@Kettenhund75 4 жыл бұрын

Just a suggestion: always cap the opening on welded pipe/tubing. Creates a much more finished appearance.

@DiversificationPlus 5 жыл бұрын

You made a person very happy Good job man

@garabeds 11 ай бұрын

I'm extremely moved by this sentiment! My aunt was disabled when I was growing up and fusing multiple bikes together is a regular thing in Africa - due to necessity. I'm super inspired by what you've done! and thank you. I'm confident your friend loves it! Awesome!!

@raesurtee4711 5 жыл бұрын

Being a wheelchair user myself, i'm not paralysed i have multiple sclerosis. This is out of this world would allow people to break free from pavements and go anywhere they want bring back freedom. You have gained a subscriber, as my life is all about adaptations and this is one amazing adaptation well done.

@altamashkhan5313 5 жыл бұрын

One word to define this video "Awesome"

@Anothersigmamale 5 жыл бұрын

Jerry, get two big springs bellow the back of the seat on both sides. A mudguard in front for that rainy mud splashes. This should make it better for her.

@cliffmiller1330 2 жыл бұрын

I'm about to start making one for my daughter, I'm can't wait till it's done! And I gotta say, this was soooo awesome of you to build this for your friend, it's inspirational to see!

@codygolembreski5883 11 ай бұрын

His girlfriend at the time, now wife.

@spidennis 5 ай бұрын

Progress report?

@thewarning67 2 жыл бұрын

I'm new to this channel has been binge watching all your different videos cuz you guys do literally everything I've been thinking about doing and love to do I just got in a wheelchair about 2 years ago and I'm learning to get around on my own more so now that like fully healed from everything and I absolutely love being independent and the newer version you have called the rig I would love that

@justincredible1724 4 жыл бұрын

I cant belive I'm just seeing this and the other videos on this. Are there any updates/upgrades you two have made? An updated video would be cool

@dougscustomcargarage3434 5 жыл бұрын

I sure could use one I have muscular dystrophy and cant injoy the out doors because i cant walk well and cant get electric wheel chair. Coolest chair I've seen man wow

@pluto762 5 жыл бұрын

This was AWESOME! Both as a gesture, and the actual result. Great job!

@oskarthepyrenees5277 5 жыл бұрын

Nice job! I watched the demo video as well and you should flip the brake lever assemblies for better ergonomics. Also you should ensure run off one bike battery , allowing you to increase the overall distance and then turn both on for all terrain applications Parking brake can be modeled after an older ATV set-up with a brake lever catch. Cheers!

@Knobiks 5 жыл бұрын

Soo... you met a beautiful disabled ex-athlete girl and randomly decided to make her a double electric bike? ok... out with it :D whats your secret plan ;>? anyway good job! thumbs up ofc!

@WandersOfficial 5 жыл бұрын

Yea ...im seeing a few sparks between the 2 aswell..haha

@ross-carlson 5 жыл бұрын

@@WandersOfficial Well given they're dating I hope so!

@LiliaSahanova 5 жыл бұрын

@ShadowMonster He proposed. SO they are well beyond dating at this point

@Guds777 5 жыл бұрын

I think she is his sister.

@casuallyextremeoutdoors9644 5 жыл бұрын

Nah they are totally a couple

@MarvelDcImage 4 жыл бұрын

You can now add lights in the sawed off tube of the handlebars that point forward.

@anshumanvats1632 4 жыл бұрын

Awesome project! Although one simple thing I would change is the position of breaks handles we could have it below so it's easier to use

@davidschmidt6013 5 жыл бұрын

I commented on your other vid about this chair. So glad to see the smile on Camry's sweet face. You and her both have a new fan. Best to both of you! :)

@TechDove 5 жыл бұрын

Just curious, why did you make the seating section blue? Would have been cool to see flat black lol

@JerryRigEverything 5 жыл бұрын

Its one of her favorite colors.

@TechDove 5 жыл бұрын

JerryRigEverything I figured that, just wasn't sure if it was your color choice or hers. Thanks for the reply! Awesome creation by the way!

@MrNuclearGaming 5 жыл бұрын

@@JerryRigEverything One of the coolest projects ever. At this point Zacks being more innovative than Apple.

@DarrenMansour 5 жыл бұрын

Matte black?

@herrsteinr637 5 жыл бұрын

MrNuclearGaming ! Which isn’t hard.

@adityamishra7659 5 жыл бұрын

" Is that supposed to be on fire?" 😂😂

@glenncary6073 4 жыл бұрын

I'm for anything , that will give disabled people freedom & Independence ! Congratulations & well done !! Thank You ! To all of you involved : Blessings 🇺🇸

@kindaiffy1663 5 жыл бұрын

You sir are a true hero! Helping through creating, you give me hope for humanity! Oh, a steering tip; tilt the the angle bracket steering arms a bit towards center. That way you will get a differentiated steering that compensates for the differing turn radius of the inner and outer frame in the turn. Have a good one! :-)

@elroydias3963 5 жыл бұрын

Hi nice video but a quick advise u should cover the back Tyre part with something or the person who is driving it, it's clothes will get dirty if the tyres are dirty or muddy. You're welcome

@Yeeguss 5 жыл бұрын

Jerry out here tearing down physical boundaries

@nataliefedorenko 4 жыл бұрын

You both are so lucky having met each other! Such a beautiful couple ♥️

@johnnywishbone932 5 жыл бұрын

As soon as he started welding I turned my head to avoid welder's flash. hahahahaha! Old habits never die.

@Juhuuu 5 жыл бұрын

If you do more welding, I'd suggest covering up those arms with something since welding emits a lot of UV light which is not good for your skin.

@johnphillip1711 5 жыл бұрын

Agree welders sunburn can be pretty bad. TIG can give some shocking aunburns in just a couple of minutes without arm coverage (voice of personal experience here - I'm just tacking up, it'll be fine. Get indoors....arms lobster red between sleeves and gloves. Welders cap is also a good idea, weld spatter on scalp (even with hair) hurts

@BESHYSBEES 4 жыл бұрын

John Phillip I’ll second everything you said

@MrTommyboy11 3 жыл бұрын

very cool gift! it looks like a fun and something thatll let her be able to be off and running wherever she wants to go.

@VivekJoshi. 5 жыл бұрын

Wow!! Look at how happy she looks!

@niteshns 5 жыл бұрын

I think needs seat belts to hold her in place because if she falls due to some jump she would not to able to control her fall .. great Idea otherwise it's really special

@josharntt 5 жыл бұрын

Then she'd be trapped

@ScottR10 5 жыл бұрын

Roll cage and harness...

@connorandrews2859 4 жыл бұрын

Now I am thinking about one of these made from old Harley Davidson parts. xD

@johnMcRock 5 жыл бұрын

I build industrial equipment at my job, and have a few suggestions to this awesome project. You should use ball joints from pneumatic cylinders for joining the steering, that would make it adjustable as they have internal threads. Also I would use the hole for the seat together with the bottom mounting, as they would increase the stiffness of your frame. Hope this is useful. Thanks for a great channel 🤘

@TimothyNyota 5 жыл бұрын

This is by far the coolest thing I have ever watched on KZfaq. Make the video longer please

@antmakov 5 жыл бұрын

You should have seen crazyRussianhacker - safety is number one priority :D Awesome video 👍

@Alvaro-em1dj 5 жыл бұрын

„Is thats supposed to be on fire?“ 😭😭😂😂

@ashevillejax 5 жыл бұрын

Thanks for giving the details on how to build that. I already have that same exact electric bike for the last 3 years when they first came out. Now I'd like to take some welding lessons and find someone who needs that kind of transportation. I'd consider that a great pay it forward gesture and I hope I can use my existing bike as a gift to the person I still have another Schwinn mountain bike that I converted to electric.

@pokomonpokomon4255 5 жыл бұрын

Good innovation Bro. Life changing, worth your effort. Great!

@tom_do_things568 5 жыл бұрын

ver. 2.0 … seat on shock-absorbers…. like truck seats or something similar

@drevnykot 4 жыл бұрын

you barbarian, you cut chain with angle grinder everything else 11/10 :D

@binaryoverload 4 жыл бұрын

I know right! I suppose it's the quick way 😂

@donavincaballero5976 4 жыл бұрын

I really liked watching this type of video, i myself work as a welder. And its a cool feeling being able to stand back and be like wow i made that

@ardemus 5 жыл бұрын

Love it. It's brilliantly simple, if a bit over built (which I totally support). Maybe a nylon washer instead of a metal washer between the tie rod and the angle bracket?

@jibinyt 5 жыл бұрын

0:6,0:16 feels GTA5 :-)

@LashesByMariana 4 жыл бұрын

“WE DONT WANT TO MODIFY TOO MUCH” Goes and starts tearing it apart... lol

@TheBacontarian 4 жыл бұрын

Nothing was really modded on the bikes, just took off the cranks and bottom bracket. All you need is a new handlebar to convert it into a regular bike again

@jeepsandmtbs2513 5 жыл бұрын

Amazing. You made a fun ride that opens up even more exciting possibilities and adventures for Cambry. Great job! I was thinking about the seat and how to make it easy for Cambry to get on and off the bike on her own. What about 180 degree rotating, locking seat? If the rear tires are locked out by the motors or brakes, she can use them as support. Then she can transfer to the seat and rotate it to face forward. However, the main challenge I see with a rotating seat is her ability to support her legs as she rotates in and out of the bike. Anyhow, just wanted to share a thought that might stimulate other ideas. Thanks for using your skills and talents for good! Inspiring.

@j.w.m.rhynejr9766 5 жыл бұрын

Sir, this is an awesome project build for a deserving lady. I am inspired to try and make one for my use!

@DrMTechnik 5 жыл бұрын

One thing to watch out for when designing the steering mechanism: Right now both front wheels are turning in exactly the same angles, which isn't ideal. Ideally the inner wheel would turn a little bit more, so no wheel slips when driving in a curve. This may also reduce wear on the front wheels.