Not just you HF👊 Most of us think about what we are doing and go the extra mile🤩 As always, it's only the few coshers that give us a bad name with poor workmanship 😵 Thanks for watching 😎 Cheers Del

Too right Marc🤩Although the site conditions are not really conducive to fitting expensive kitchens 😵Thanks for watching 😎 Cheers Del

Hi Gavin. I've had a mad video week, and released one every day 😵 Two more to come yet🤘Cheers Del

Great shout on the roller Peter, as you are quite right, and there can be some super sharp edges on those boards😵Thanks for watching and hope you also have a great weekend😎Cheers Del

Hi Paddy. I'm quite technical in my approach to everything, and consequently, there is a reason I do everything the way I do it👊 Thanks for watching 😎 Cheers Del

You make a good point Roy, and making kitchens out of wooden materials is all good and well until there's a leak or a spillage😬Thanks for your comment😎Cheers Del

@@thetallcarpenter love your videos, it's the enthusiasm that gets me, keep it up Del.

@@dilligaf2386 Will do Roy👍

Hi Lewis. I think if fitted kitchens all the time then I would probably have a similar sealer and brush to you👊However, I didn't do kitchens that often so just go with what I have which is always a bit of old faithful PVA🤗Great comment and thanks for adding it so others can read it😎Cheers Del

Hi Ben. I rarely fit chipboard laminated worktops, but, the next time I do, I'll definitely do a video on it👊 Thanks for your comment and for watching 😎 Cheers Del

Hi Kevin. Its been a video extravaganza this week bud🤪 A video every day for 7 days🤩 Thanks for your comment mate and for watching 😎 Cheers Del

Its certainly not a five minute job to do it properly John🤔Thanks for your comment😎

Hi Andy. I know exactly what you're saying ole friend😵Thanks for your comment bud😎Cheers Del

You sure can Tyler🤩Great comment, and thanks for watching😎Have a nice weekend yourself bud👊

I use clear silicone applied with a plastic packer works a treat

@@MrBoycie2009 Yeah, that's works a treat David🤩 Cheers

Great shout on the MDF primer Gary👊 Some customers are happy to also silicone around the panels, but most don't like to see it🤔Thanks for watching and have a great weekend😎Cheers Del

The plastic base edging is perfect for protecting the bottom of this kind of board Mohammed 😎 Cheers bud

Hi Ian🖐 I've never actually tried to overpaint it, but what you say does make sense🤩 The less said about bath panels the better mate😵Thanks for watching and have a nice weekend😎Cheers Del

Cheers 👍

@@ianmcbain898 😎👍

Hi there🖐 I did use some sort of clip, but I cant, for the life of me, remember what sort it was🤯As you say, Plinth Lock type clip would be perfect👍Thanks for your comment😎Cheers Del

Hi Harpreet🖐If I was a bit more organised I think that's whatbI would use as it's good stuff👊Thanks for watching 😎 Cheers Del

Hi Paul. Iron edging sounds great if you can get to match🤩 Your tip of screwing tabs to top of the wall panels is really great to get it lined up, and something I also do as it frees up a hand to help get it clamped up👊 Thanks for your comment and for watching 😎 Cheers Del

Hi Geoff🖐That's a great way to do it bud, and will deffo help reduce the chance of water damage👊Thanks for watching😎Cheers Del

Hi Gareth🖐Everything you mention would have been suitable here, the only problem with this job was the builders had a lot of things in the wrong order, plus they wanted the kitchen fitted before the client had chosen the floor. There was lots on this one that I wouldn't have personally done, but you know what they say about the customer always being right😵Cheers Del

we got to do one lone panel on the end of a work top going over a washing machine supporting the work top, factory end down with a few spacers underneath to raise it a few millimetres off of the floor

I haven't always got silicone on the van Philip, and I suspect I would probably use it if I did👍Thanks for your comment😎Cheers

Hi Sadaqat. That is perfect as well👊 Thanks for watching 😎 Cheers Del

@@thetallcarpenter ur welcome buddy

Hi there🖐Not all PVA's are created equal, and I can't remember the exact details, but the weatherproof one I use is of the type that can resist exposure to moisture👍It's, perhaps, something I should make clearer when I'm talking about it. Thanks for your comment 😎 Cheers Del

Thanks for watching 😎 Cheers Del

Hi Andy. Yes bud, a 60t blade should make a lovely cut. Still cut from the back though to minimise break out on the face side👍Cheers Del

@@thetallcarpenter 👍 Thanks Del

@@bricklayersworldwithandy6277 My pleasure Andy🤩Hope you get on well with your kitchen👍

@@thetallcarpenter l may well put it on my channel, how to fit a kitchen with an axe and a hammer lol, only joking but some will think that coming from a Bricky but I actually do know what ime doing I had a good tutor Brian the Brick who was actually a carpenter I worked with for me any years 👍

@@bricklayersworldwithandy6277 Stick it on your channel Andy👍(I guarantee your carpentry is better than my bricklaying🤣).

Hi there🖐I just key up the back wall surface and stick the panel back with high performance adhesive👍Cheers Del

Hi there🖐Great comment and YES I have talked customers onto having a shadow gap under the end panels as it, almost, guarantees the panel won't suck up and spilled water👍Cheers Del

It also gives a crisp upper line to the shadow gap and may well reduce any undulations in the floor. I suppose the gap will be some multiple of the floor undulation amplitude. What about backlighting it so you get a lit gap rather than a black gap? At Jaguar we used to obsess about panel gaps on the openings. Body factory final buy-off was a bloke with a stick. (On the Mini in the 1970s they used to stretch the door frame with a jack on the diagonal to fit the door, as the door could not really be tweaked) Can you try it so I don't have to? Also have gap above the plinth to make it easier to pull off, back light that too? .... useful next video on these dark nights 😇@@thetallcarpenter

It's gloss laminate

Hi Rachel🖐Yes, you can cut the front lower, damaged edge of the end panel off, carefully with a multitool👍J can't really advise on the plinth, but you may be able to rob enough from a corner join to shut the gap left where the end panel was🤞Cheers Del

@The Tall Carpenter thanks. I will just replace the plinth with a longer length as it has blown on the edge too. The longer length will run across the rough edge of the panel then, hiding it. Will then use a sealant too to avoid water damage again.

@@rachelf6207 👍😎

Hi Rodger. Yes, I would have thought so👍Cheers Del

Hi AK🖐I would check/assume that the front of the unit will be square to the underside of the work top and measure from these points back to the wall, (obviously allowing for any panel overhang at the front), and down to the floor, and carefully cut the panel👍Cheers Del

@@thetallcarpenter Cheers. Sorry I meant how to scribe to floor as seems a bit uneven, (v old house, wood and stone portions of floor..)

would you tilt the panel to scribe and then measure? or use a template?

@@akfisher7138 It depends on how much 'scribing' is needed, and it's tricky to advise precisely without seeing it😬

@Ak Fisher I see now👍Yes, I would tilt the panel out/hold it out parallel, to scribe the bottom.