In this video I show how I use a simple block/spacer to help me accurately cut my kitchen ends panels to the correct width
Пікірлер: 175
@coglan49122 жыл бұрын
Love the videos. Between you and Robin Clevett you have inspired me to leave the army and become a joiner. Currently at college one day a week. Would love a video of your van set up and the tools you carry on a daily basis. 😀 keep up the brilliant content.
@thetallcarpenter2 жыл бұрын
Hi Coglan.🖐 That's amazing mate, and I really wish you every success in your new career👊 I would love to do a van video but not sure its a good idea from a security point of view😬 Guys like you are the main reason I'm even doing the videos, and its a real thrill for me to feel that I might be helping, especially guys that are learning😎 Thanks for watching and your comment🤘 Cheers Del
@Goodwithwood692 жыл бұрын
Its the best trade out the lot! Super varied! You will never be bored!
@thetallcarpenter2 жыл бұрын
@@Goodwithwood69 Too right Matthew🤗🤩
@mohammedmughal52212 жыл бұрын
Perfect I use a lot of jigs to help accuracy.That track saw is a life saver I recently fitted a lot of fire doors had to trim them at the bottom for carpets.I did them clamping at the bottom and trimmed them without removing the doors saved me a lot of time
@thetallcarpenter2 жыл бұрын
@@mohammedmughal5221 Hi Mohammed. That's a really interesting comment mate, as I wasn't 100% sure you could use the track saw for that 😉 Great to know😎Cheers Del
@kingoberz22542 жыл бұрын
You explain things clearly and make it easy to understand, you don't over complicate things either which Is great thanks dude 👍
@thetallcarpenter2 жыл бұрын
Appreciate your kind words King Oberz 🤩Thanks for watching😎Cheers Del
@ozzyefc442 жыл бұрын
Great little tip del 👍
@thetallcarpenter2 жыл бұрын
Cheers Ozzyefc🤩 Thanks for watching👍
@markhoulding19382 жыл бұрын
Great little tip for those DIY people and apprentices 👍⭐️
@thetallcarpenter2 жыл бұрын
Hi Mark. I never know who might find these little tips useful, as they just seem like everyday things to me/us. I/we have to remember that some people wont know anything about kitchen fitting, so every little tip like this helps🤩Thanks for watching bud😎Cheers Del
@TYLERCONSTRUCTION2 жыл бұрын
Excellent tip mate 👍
@thetallcarpenter2 жыл бұрын
Hi Tyler my G👊 Thanks for watching bud🤩
@blastfromthepast85042 ай бұрын
Fantastic tip mate,cheers
@thetallcarpenter2 ай бұрын
My pleasure🤩Thanks for watching 😎 Cheers Del
@michaelplays24492 жыл бұрын
Great video Del ,Thanks !!!
@thetallcarpenter2 жыл бұрын
Hi Michael👊 Thanks for watching🤩Cheers Del
@paddy1202 жыл бұрын
Great tip 👍
@thetallcarpenter2 жыл бұрын
Cheers Paddy🤩 Thanks for watching 😎 Cheers Del
@carllamb67112 жыл бұрын
Good little tip thanks 😊
@thetallcarpenter2 жыл бұрын
Hi Carl🖐 Cheers bud and thanks for watching😎 ATB Del
@georgeomalley60662 жыл бұрын
Thanks for the tricks n tips thinking of fitting my own kitchen
@thetallcarpenter2 жыл бұрын
You're welcome George🤩Cheers Del
@sicpac66t2 жыл бұрын
The knock the plaster off tip is good, often do it for skirting as it can curve out quite bad sometimes. Liked the end panel measuring tip to. I am going to use that. Cheers mate.
@thetallcarpenter2 жыл бұрын
Hi there 🖐 The skirting nearly always 'bells out' at the bottom, and if it's below the skirting line, I find it quicker to knock/chisel it off rather than re cutting the panel👍 Thanks for watching😎Cheers Del
@frankblack14812 жыл бұрын
Congrats on the imminent 10k. Well deserved!
@thetallcarpenter2 жыл бұрын
Hi Frank. Yeah, it's bonkers really considering the channel is only 1 year old👊 Thanks for your support and for watching 😎 Cheers Del
@fireblaster99612 жыл бұрын
Track saws have made cutting theses finishes so easy, no more reverse cuts or masking tape.
@thetallcarpenter2 жыл бұрын
Hi FB🖐 I genuinely feel like a right donkey for not getting one of these years ago when my mate told me about them🙈I'd be lost without one now👊Thanks for watching bud, and your comment😎Cheers Del
@flyingjackcarpentry93942 жыл бұрын
@@thetallcarpenter I really want one. But I rarely get kitchens or finer 2nd fix work. Im not sure its worth it to buy one to rip down sheets of osb/ply for shuttering. Cutting the tops and bottoms of those bloody oak veneered doors everyone wants now would be the main reason I want one. I've had to replace two of them before when my ripsaw, masking tape and clamped level set up blew an ugly chip out the veneer. I'd even scored the line as deep as I could with a Stanley. But I still really want one. Having to set up and clamp a straight edge at about 28 and a half mil away from the cut gets tedious and easily goes wrong when you're trying to get things done quickly. (Why don't they make the foot/plate on ripsaws an easy 30mm from the blade?)
@thetallcarpenter2 жыл бұрын
@@flyingjackcarpentry9394 I hear you Kallum, and its always tricky weighing want vs need when it comes to tools. You'd be surprised how much you would use a track saw, and even if I didn't do another kitchen, I would still not be without one for general carpentry👊Cheers bud
@garvielloken39292 жыл бұрын
Quality Tip! 👌🏻👌🏻👌🏻👌🏽👌🏽
@thetallcarpenter2 жыл бұрын
Alright my G🤟 Thanks for watching mate 😎
@brithozierhozier47182 жыл бұрын
Thanks tall carpenter great tip appreciate your effort in producing content while at work ! I always scribe my side panels in though as the plaster is always wavey even more so for tower unit panels only difference is the cut takes a bit longer as I'll use jigsaw with slight back bevel
@thetallcarpenter2 жыл бұрын
Hi there🖐 This was not a good example of a typical end panel . and this job has surprisingly flat walls with very good plastering. As you say, it usual to use a scribe block on most panels when cutting to a wall, and I'm hoping to get a video on that on this job, as I've got 3 kitchens and 3 utilities to do on it👊Great comment, and thanks for watching😎Cheers Del
@brithozierhozier47182 жыл бұрын
@@thetallcarpenter look forward to the vid ! Cheers Del
@thetallcarpenter2 жыл бұрын
@@brithozierhozier4718 Fingers crossed I cam make it on this job🤞Cheers
@chaproo123452 жыл бұрын
Thanks again bud appreciated
@thetallcarpenter2 жыл бұрын
My pleasure Tony😎Cheers Del
@squidlings2 жыл бұрын
nice. i'll try that scribe cut
@thetallcarpenter2 жыл бұрын
Cheers bud🤩Thanks for watching 😎
@MrTomomahony2 жыл бұрын
what a guru
@thetallcarpenter2 жыл бұрын
You're too kind Tomo🤗Cheers Del
@peterbell41542 жыл бұрын
liking the Makita Del.
@thetallcarpenter2 жыл бұрын
Hi Peter. I haven't used any other make of plunge saw, but this was recommended to me by a really good mate, and I'm so impressed with it and how useful it is, especially when doing kitchens👊Thanks for watching as always mate🤩
@peterbell41542 жыл бұрын
@@thetallcarpenter Can't beat recommendation I think. Trouble is now I want one, as I'm old school still using straight edge yes I know shocking. Thanks Del😊
@garykilvington94172 жыл бұрын
Love a bit of kitchen video even though it’s my daily routine looks very much like the Milano range from Wren with the metal work either aluminium or copper under the worktops and between full height units or could be totally wrong
@thetallcarpenter2 жыл бұрын
Hi Gary. These are a kind of hybrid kitchen. The units are made in a small factory in the midlands, and the doors and panels come from a separate, small factory, also in the UK. Obviously, all the accessories are from the usual suspects like Hafele/Blum/Salice etc.👊Its really cool that you still watch the odd kitchen video despite doing them all day long🤩and I love seeing what other guys are up to and how they do things🤗Thanks for watching bud, and your comment😎Cheers Del
@Ultimate-roofing-square.2 жыл бұрын
Nice Del. So much easier than keep measuring. 👊🏻😉
@thetallcarpenter2 жыл бұрын
Hi Dan. It also gives a really sharp edge to read the tape off rather than the slightly rounded edge lipping👊Hope you are well mate, and thanks for watching😎Cheers Del
@Ultimate-roofing-square.2 жыл бұрын
@@thetallcarpenter I’ve got a old bit of MDF also near 22 mm. Yes all good thanks, hope you too. 🙏
@thetallcarpenter2 жыл бұрын
@@Ultimate-roofing-square. I'm so glad to be back at work after a week off with some nasty bug mate🤩 Cheers
@Ultimate-roofing-square.2 жыл бұрын
@@thetallcarpenter glad you back to fighting fit and on the 🪚🔨🪛. 🤙🏻
@thetallcarpenter2 жыл бұрын
@@Ultimate-roofing-square. I can't remember the last time I was so happy to be back at work Dan🤩
@simonstones19182 жыл бұрын
Great. Thanks for the tips 👍
@thetallcarpenter2 жыл бұрын
My pleasure Simon👍Cheers Del
@simonstones19182 жыл бұрын
@@thetallcarpenter I actually used your little tip today as I was fitting a kitchen. I’ve not fitted a kitchen for a long while so there was lots of thinking going ok! Your tip of using a small block of wood as a guide worked a wonder…👍
@thetallcarpenter2 жыл бұрын
@@simonstones1918 That's awesome Simon👊Glad you got on well👍Cheers Del
@simonstones19182 жыл бұрын
@@thetallcarpenter I’m a plumber so I was walking the tightrope of being a kitchen fitter for the day. Couple of mistakes but half the kitchen is in….🙏
@thetallcarpenter2 жыл бұрын
@@simonstones1918 Nice one👍
@denty322 жыл бұрын
Del these are great little videos, I’ve got to find the one where you stand the tall units up after you install the adjustable legs, I’m fitting a kitchen in the next couple of weeks. Keep up the good work my friend 👏👏
@thetallcarpenter2 жыл бұрын
Hi Mark🤩 Ask, and you shall receive my friend🤗Thanks for watching bud😎Cheers Del kzfaq.info/get/bejne/qJaJitWc1dnKg5c.html
@denty322 жыл бұрын
@@thetallcarpenter not all hero’s wear capes😂😂 thanks mate
@thetallcarpenter2 жыл бұрын
@@denty32 😆👍
@mohammedimran4439 Жыл бұрын
Thanks
@thetallcarpenter Жыл бұрын
No worries Mohammed😎Cheers Del
@paulfinnonjoinery2 жыл бұрын
good tip again. i fit a lot of howdens kitchens but there is no scribe allowance on the end panels so sometimes its not possible to get it all abso perfect i find
@thetallcarpenter2 жыл бұрын
Hi Paul. I know what you mean bud. OK if the walls are straight and plumb, but no good of they're not😖 Thanks for watching 😎 Cheers Del
@markhoulding19382 жыл бұрын
Now you need part 2 to show them how to scribe to an uneven wall leaving the 22mm on lol 😂
@ryan719542 жыл бұрын
Exactly my thoughts. Got to allow for the plasterers wave at the bottom
@thetallcarpenter2 жыл бұрын
Hi Mark. I'm really hoping that this job will give me the opportunity to do exactly that🤞 The jobs really difficult to make videos on as there is so much going on and so much noise😵Cheers mate.
@alexbekele89452 жыл бұрын
Definitely.
@thetallcarpenter2 жыл бұрын
@@ryan71954 Hi Ryan. I know what you mean bud, and call it 'belling out' 👍Cheers bud
@thetallcarpenter2 жыл бұрын
@@alexbekele8945 😎👍
@heriothandyman31482 жыл бұрын
Always love to see others awesome tips. What’s the cutout below where the worktop would be, is that for a horizontal apron style cross piece? Not seen that before.
@thetallcarpenter2 жыл бұрын
Hi Heriot. The cutout is for an aluminium rail that allows for the doors to be opened from the top so there's no handles👍 I'll probably do a super fast video on it, as quite a few guys have asked🤩 Thanks for watching mate and your kind comment 😎 Cheers Del
@bobmartin51012 жыл бұрын
just bought a track saw, have not opened it yet. Sincerely hope the silicone rubber bottom is good enough to use without the clamps. Thanks Del.
@thetallcarpenter2 жыл бұрын
Hi Bob. I've not used clamps on mine yet, and I've used it all kinds of surfaces👍 If I was cutting a REALLY expensive material, and wanted to be extra sure it wouldn't move, I would put a couple of clamps on it😎You're gonna love it mate👊Cheers Del
@frankblack14812 жыл бұрын
Peter Millard (10 Minute Workshop) has done a load of videos about tracksaws - maybe some Have tips about clamp/no-clamp?
@thetallcarpenter2 жыл бұрын
@@frankblack1481 Good point Frank👍It would be good to know at what point you can no longer rely/trust on just the foam/rubber straps to hold the rail in place, and need to get the clamps out💪I'm still a new boy with these saws, and haven't found the limit of it yet without the clamps😵 Great comment 👍 Cheers Del
@Michael_Courtney26 күн бұрын
Thanks for the video. What do you do if the floor is crooked?
@thetallcarpenter26 күн бұрын
Hi Mike🖐If the floor is bad, then the panel needs to be scribed and the bare edge sealed👍Cheers Del
@pauln61882 жыл бұрын
Great tip Del and great channel. Could I ask what blade you use in the Makita track saw? Thanks
@thetallcarpenter2 жыл бұрын
Hi Paul. Its the Makita blade that came with the saw. I'm not actually that impressed with it, as it can wander slightly😬I thinks its quite common with the super thin kerf blades in many of the cordless tools nowadays🤔I'm looking at getting a Freud one to replace it👊Thanks for watching and your kind words😎Cheers Del
@pauln61882 жыл бұрын
@@thetallcarpenter Cheers Del👍
@thetallcarpenter2 жыл бұрын
@@pauln6188 😎👍
@antonyporter50452 жыл бұрын
great video...what stops the track for that saw from moving around ???? cheers
@johnmackay77892 жыл бұрын
Friction strips on the underside of the track.
@thetallcarpenter2 жыл бұрын
Hi Anthony🖐 The underside of the rail has 2 grippy foam strips in it which hold in place. There is also a rubber, anti splinter strip along the front edge, that also stops the track from moving👊 Marvellous really🤩Thanks for watching😎Cheers Del
@TheBigSugs2 жыл бұрын
Great little video, thanks. Did you design & order the kitchen? You mentioned in one of the comments about getting the units & doors from separate places.
@thetallcarpenter2 жыл бұрын
Hi there. I don't plan/design these kitchens and I am just helping out a mate by fitting them. He puts together an awesome set up, and can get the units and doors made to any size, so can always fit the space really well. The choice of doors and panels is never-ending, but, obviously, this all comes at a price😵 Thanks for your comment and for watching 😎 Cheers Del
@TheBigSugs2 жыл бұрын
Ah, that’s a shame. I was hoping for a video on how you go about doing it! 👍🏻
@thetallcarpenter2 жыл бұрын
@@TheBigSugs 😪
@SME_Ste2 жыл бұрын
Considering Festool are supposed to be the best, i see more joiners with the Makita tracksaws, main and cordless
@thetallcarpenter2 жыл бұрын
Hi SM. Each to their own I guess, but the only bit of Festool kit I have I'd the extractor, as I do think they make the best ones👍 Thanks for watching 😎 Cheers Del
@SME_Ste2 жыл бұрын
@@thetallcarpenter The wireless switch for the extractor is cool
@thetallcarpenter2 жыл бұрын
@@SME_Ste It really is bud👊I think DeWalt has the best remote switch, as it is triggered by vibration, so comes on as soon as you start the tool🤩Cheers
@gavl.f.c61972 жыл бұрын
Hi del, What's that wireless button you have for the extractor?
@thetallcarpenter2 жыл бұрын
Hi there🖐Its just Festools own Bluetooth remote switch that is compatible with all of their Bluetooth enabled extractors👍Cheers Del
@simoncarney99442 жыл бұрын
Another great little tip Del! Can I ask what model of Marita track saw you have? Looking forward to the next one! 👍🏼
@thetallcarpenter2 жыл бұрын
Hi Simon. It's the DSP600, and I've done a video about it😎 kzfaq.info/get/bejne/ep2Dg8h-ud2ynmw.html Thanks for watching 😎 Cheers Del
@simoncarney99442 жыл бұрын
@@thetallcarpenter Thanks Del! I must have missed that one, I’ll have a look tonight.
@jaser4619862 жыл бұрын
@@thetallcarpenter hi del. Do you find with the track saw you can cut the panel either way for a clean cut. Can find it splinters at the other end sometimes like a little blowout if you were planing end grain the wrong way at ends of doors. Any tips on how to stop that?
@thetallcarpenter2 жыл бұрын
@@jaser461986 Hi Jase🖐 The underside of the cut should be perfect as only the front of the blade should be cutting the material, basically doing an upwards cut. Tear out on the underside is because the blade is not toeing in at the front, meaning the back of the blade is slightly catching the material on its upward path👍I have done a video on it which I'll try and put a link to👊Cheers Del
@jaser4619862 жыл бұрын
@@thetallcarpenter hi del. Thanks for the reply. Yes that would be great if you could dig out that link. Thanks for taking your time to reply.
@arransullivan42222 жыл бұрын
Great video - what's the model of the saw you're using mate?
@thetallcarpenter2 жыл бұрын
Hi Arran🖐I can't remember the exact model number, but its the twin 18v battery, (36v), one, and there's only one model. I have done a video of it on my channel with a few if my findings and some tips👍Thanks for watching 😎 Cheers Del
@arransullivan42222 жыл бұрын
@@thetallcarpenter thanks a lot for the quick reply del, much appreciated!
@SLDOQ362 жыл бұрын
Hey Del :). Question, for a high gloss door, would you cut good side up or down?
@thetallcarpenter2 жыл бұрын
Hi Susan🖐I would always cut with the good side down using a circular saw👍Cheers Del
@SLDOQ362 жыл бұрын
@@thetallcarpenter thanks Del :)
@danielroberts10856 ай бұрын
What about the flooring. Will you remove it prior to fitting the floor and cut again?
@thetallcarpenter6 ай бұрын
Hi Daniel🖐From memory on this job, the panel was left up the thickness of the flooring so it could be 'slid' under when being fitted👍
@dilligaf2386 Жыл бұрын
What's those cutouts for on the top corners of the base units. Good video
@thetallcarpenter Жыл бұрын
Hi there🖐The cut out is for a metal extrusion that leaves a recess to get your fingers in behind the top of the door so handles are not needed👍Cheers Del
@dilligaf2386 Жыл бұрын
@@thetallcarpenter oh cheers you learn something every day. Great video
@thetallcarpenter Жыл бұрын
@@dilligaf2386 👍😎
@DavidMulliner2 жыл бұрын
Nice simple tip Del nice one ;0) What is the inline switch on the hose your using please mate? Thanks alot David
@thetallcarpenter2 жыл бұрын
Hi David🖐It's the CT-F1 remote that is used with the Bluetooth extrator👍Cheers Del
@DavidMulliner2 жыл бұрын
@@thetallcarpenter brill thanks alot Del :0)
@thetallcarpenter2 жыл бұрын
@@DavidMulliner 👍😎
@timbolton22412 жыл бұрын
Great tip ... plenty hot toddies for the cold....Take care..🤧🤧🤧
@thetallcarpenter2 жыл бұрын
Hi Tim. I'm back at full effect now💪 Thanks for watching 😎 Cheers Del
@Hussain-ch3pr2 жыл бұрын
Do you have videos of scribing a panel for a wall cabinet on an uneven wall?
@thetallcarpenter2 жыл бұрын
kzfaq.info/get/bejne/fr-XYLBkrpO2eKs.html Only this one Hussain, using the U Scribe jigs👍
@miserablesod12 жыл бұрын
Good tips. Out of interest, where did you source the Festool to Makita hose adapter?
@thetallcarpenter2 жыл бұрын
Hi there. There was no adapter needed as the Festool hose fits the Makita outlet perfectly🤩Cheers Del.
@miserablesod12 жыл бұрын
@@thetallcarpenter is that the new 27mm hose?
@thetallcarpenter2 жыл бұрын
@@miserablesod1 I presume so as its a 2021 extractor👍
@miserablesod12 жыл бұрын
@@thetallcarpenter nice one Del, thanks for sharing
@thetallcarpenter2 жыл бұрын
@@miserablesod1 👍👊
@ChristopherClaudioSkierka2 жыл бұрын
Hi, what material is the caracas cupboards made from, looks like solid wood of some type? Thanks in advance
@thetallcarpenter2 жыл бұрын
Hi Christopher🖐The carcases are made from 18mm MFC. (melamine faced chipboard)👍Cheers Del
@ChristopherClaudioSkierka2 жыл бұрын
@@thetallcarpenter may I ask what the brand /suppler is?
@thetallcarpenter2 жыл бұрын
@@ChristopherClaudioSkierka Hi Christopher🖐 I honestly couldn't tell you as I was only fitting these odd kitchens for mate and don't really know the ins and outs of what he gets from where😬Sorry I can't be more help👍
@timdhines4 ай бұрын
What if your wall is not straight? Do you not need to scribe to the shape of the wall rather than measure top and bottom?
@thetallcarpenter4 ай бұрын
Hi there🖐If the wall was a long way out of straight, then I would take additional steps to allow a nice fit👍Cheers Del
@traveller0172 жыл бұрын
What brand of extractor are you using? Is it cordless?
@garykilvington94172 жыл бұрын
It’s a festool mate possibly a midi ctl with Bluetooth as Del has the Bluetooth remote attached same as my set up
@thetallcarpenter2 жыл бұрын
Hi there. Its a Festool CTL MIDI 1. In my opinion, hands down the best portable dust extractors you can buy👊Cheers Del.
@ali110123 ай бұрын
Hi I just wanted to know which company kitchen is this?😊
@thetallcarpenter3 ай бұрын
Hi there🖐These kitchens are supplied by Lifelong Kitchens in St.Neots, Cambridgeshire👍Cheers Del
@jimmycooper73902 жыл бұрын
Back at work now mate, hope your well?
@thetallcarpenter2 жыл бұрын
Hi Jimmy🖐 I feel like a new man now mate👊thanks for asking🤩Really great to be back at work, and churning out a few more vids😎Thanks for watching bud👍
@nigeltaylor51952 жыл бұрын
Hi can you please tell me what is your preferred blade for your track saw many thanks nigel
@thetallcarpenter2 жыл бұрын
Hi Nigel🖐I am still using the Makita blade that came with saw, and am actually on the look out for a couple of replacement ones🤔 Thanks for watching 😎 Cheers Del
@nigeltaylor51952 жыл бұрын
@@thetallcarpenter thanks Del it will be my next purchase. great tips by the way keep up the good videos.
@thetallcarpenter2 жыл бұрын
@@nigeltaylor5195 Cheers Nigel👍
@nigeltaylor51952 жыл бұрын
@@thetallcarpenter hi Del how do you get on with pz2 bits ? I've tried all sorts of different makes .which do you find the best thanks nigel
@thetallcarpenter2 жыл бұрын
@@nigeltaylor5195 Great question Nigel, and I have a very specific answer👍After years of trying, super duper expensive PZ2 bits, I now just by a pack of 25 DeWALT bits from Toolstation for £5.99. They are great for the general works I do, and usually break before the go blunt. A pack of 25 will last me all year. If I was driving high quality screws into hard woods then they will break really easily, but a lot of that is because of poor driver control. Cheers Del
@clivet3846Ай бұрын
Why do kitchen suppliers provide 3000 worktops for 600 units? There’s no overhang at the end.
@thetallcarpenterАй бұрын
Hi Clive🖐I guess it all depends on how many units your kitchen has, and you can get worktops in 4.1m lengths👍Cheers Del
@kmclfc2 жыл бұрын
How much for the track saw
@thetallcarpenter2 жыл бұрын
Hi there. I cant remember off the top of my head, but I just searched around till I got the best deal👍(not cheap, but I was already on the Makita battery platform😉) Cheers
@stephencarlisle37432 жыл бұрын
I use Feeler block as often as I can , anything that takes maths cock ups out of the equation 👍
@thetallcarpenter2 жыл бұрын
Hi Stephen. I presume you call it a feeler block as you can 'feel' when it's flush🤔which is obvious a really great way to get it super flush👊 I've always got enough things to think about with confusing myself with unnecessary mathematics 😵 Thanks for watching and your comment 😎 Cheers Del
@johnmorrissey16752 жыл бұрын
😊👍🇮🇪☘️👏
@thetallcarpenter2 жыл бұрын
🤘😎🤘
@kevinchamberlain7928 Жыл бұрын
Only if the walls are straight...
@thetallcarpenter Жыл бұрын
Surely the walls are always straight Kevin🤔🤣Cheers Del
@kevinchamberlain7928 Жыл бұрын
@@thetallcarpenter Not in Wrexham they're not! LOL!
@thetallcarpenter Жыл бұрын
@@kevinchamberlain7928 😲😆
@vrglcom Жыл бұрын
But when the floor is finished, the end panel will be to high? 🤷♂️
@thetallcarpenter Жыл бұрын
The builder cut the floor covering round these panels🤨
@vrglcom11 ай бұрын
@@thetallcarpenter So what happens if laminate flooring needs to be fitted and you need to leave a gap for expansion? The end panels would need to be removed and cut again shorter as would need to sits on top of the floating floor though. The floor guys would not be happy with this.
@thetallcarpenter11 ай бұрын
@alnero80 I know exactly what you mean Alan👍and it's usually down to what the customers asks me to do. I this instance the builder didn't know what the floor covering was going to be as the customer hadn't chosen it, and the kitchen company I was fitting for wanted the kitchen completely finished while I was there and not have to go back to fit end panels after the floor and tops were fitted. I was told that it had 18mm hardwood flooring and was cut round the end panel and the had a scotia bead fitted😬 The builder on this job was so chaotic😵💫