Lawnmower Has Been Sitting 5 Years

No video

Lawnmower Has Been Sitting 5 Years

Рет қаралды 6,632

Күн бұрын

amzn.to/3gW5hqr Non Aersol Sprayer
amzn.to/3BwvNQC 18 Gauge Mechanics Wire
amzn.to/3H4jvjk 3/8" Milwaukee Stubby Impact gun
amzn.to/3sRNQN5 Micro Drill Bits
amzn.to/3hfRdZ3 Ultrasonic Cleaner
Help support Doublewide6 Repairs LLC by sponsoring his Patreon Account
/ doublewide6
In this video, we take a look at what you need to do to get a lawnmower that has been sitting running again.
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.

Пікірлер: 69

@doublewide6 2 жыл бұрын

amzn.to/3gW5hqr Non Aersol Sprayer amzn.to/3BwvNQC 18 Gauge Mechanics Wire amzn.to/3H4jvjk 3/8" Milwaukee Stubby Impact gun amzn.to/3sRNQN5 Micro Drill Bits amzn.to/3hfRdZ3 Ultrasonic Cleaner

@chrisssmallengines7163 2 жыл бұрын

This is why I like the older machines , built to last and lots of more years left if you take care of it . It is not fancy but gets the job done every time .

@doublewide6 2 жыл бұрын

Good build quality.

@andyhamilton8940 2 жыл бұрын

Rockin the Bruce Pender style coat!😂

@dwaynecollins4974 2 жыл бұрын

Wow I didn't click to that right away! Hey KZfaqrs! Bruce here! LOL 😂

@doublewide6 2 жыл бұрын

Yes, working with my good sweatpants on.

@gregorypiercesr.794 2 жыл бұрын

Nice to be able to work on a mower that was built to last, great job.

@wf8933 2 жыл бұрын

Loved the video. In the throw away society we live in, is nice to see these old machines brought back to life.

@doublewide6 2 жыл бұрын

Thanks I agree!

@Big_Johns 2 жыл бұрын

Very nice job Bob, it was really nice to see it fire up on the first pull after everything you did for it. The guys son should be very proud to have it brother. 👍

@doublewide6 2 жыл бұрын

Thanks John. That mower will be a pretty good one better than the $150 throw away mowers.

@Big_Johns 2 жыл бұрын

Anytime and that’s for sure brother.

@bigsonslawncare 2 жыл бұрын

That blade sharpener for me every time!👍👍

@doublewide6 2 жыл бұрын

It's a money maker for me! I built it and I love it!

@bigsonslawncare 2 жыл бұрын

@@doublewide6 Man every time I come hear and see you use it I just marvel at the moment ✔️💯💪🏽

@jackhuddleston6830 9 ай бұрын

You must of tamed that Deere pretty well. He never moved a muscle when turned on your power washer. Love the videos.

@butler386 2 жыл бұрын

For as old as this mower seems to be it did not have that much wrong with it. Great diagnosis and repairs. Should be a good mower for a long time. Thanks for the videos.

@nashguy207 2 жыл бұрын

Good job Bob. It was worth putting the time in. The only thing I noticed when you put the blades back on you had then clocked a lot closer together than when you took them off.

@esojanacig5138 Жыл бұрын

I had my Honda hrx217hxa stored properly for 7yrs. (Run the fuel empty). Few days ago i fill it up and crank rignt up in the 1st pull. Ready for the season.

@tonym6920 2 жыл бұрын

Great job Bob, as always! 👍👍

@themowerman 2 жыл бұрын

Yo yo hi Bob.. you know what for a mower that's been sat for 5 years it's not in bad condition.. with a little bit of care she is back mowing again.. good video my friend as always.. hope all the family are well..

@doublewide6 2 жыл бұрын

Nice to hear from you Mick. Let me know if you want to team up on a video sometime. Bob

@themowerman 2 жыл бұрын

@@doublewide6 yeah mate cool.. let's work something out.. that will be cool..

@bigjwarlok8538 2 жыл бұрын

One thing that I do that you did'nt mention, I always retorque the head bolts on those Quantum engines. Actually, I do that on any flathead that the head bolts are accessible on while Im working on it. Nice job. Those Quantums were great engines. Too bad they will never be built like that again!

@dwaynecollins4974 2 жыл бұрын

That's what I do every time I get a mower to repair or get running, except I don't have a parts cleaner LOL ( I actually am the parts cleaner) good video double wide!

@doublewide6 2 жыл бұрын

Thanks!

@jcondon1 2 жыл бұрын

That mower cleaned up well. Bet that engine has no plastic in it. Good save.

@doublewide6 2 жыл бұрын

You got that right!

@classicamericanflyertrains2423 2 жыл бұрын

This may be called a atlas pro but it’s actually built by homelite Jacobsen. And your right it’s a quality mower, I’d take this all day long over the new mowers even if I had to do a little work on it to get it running. If taken care of it should last for many years yet. Good save on that one!

@MikeJones-jr5hb 2 жыл бұрын

Yea, I’d get it going too & those ninja blades work great on my Snapper. It cuts up the grass in fine, short cuttings.

@doublewide6 2 жыл бұрын

yes I have used them they work well.

@jjjuarez312 2 жыл бұрын

Good job brota dang how old is that mower??? Lol it's seen better days...

@doublewide6 2 жыл бұрын

not sure? The year is rusted off.

@larrycroft470 2 жыл бұрын

Nice video Double Wide!! (As always) I have never seen an Atlas before. It reminds me of my Toro Super Recycler I am always in the camp of fixing them not junking them. I did not get to see you mow any grass though!!!

@doublewide6 2 жыл бұрын

Well I did'nt mow with it but tomorrow I will try it out.

@vinces8974 2 жыл бұрын

DW6, you do really nice work, Great video thank you

@doublewide6 2 жыл бұрын

Thanks Vince. If you do it wrong here you hear all about it.

@petefroud5308 2 жыл бұрын

Good work Bob..

@doublewide6 2 жыл бұрын

Thank you kindly

@chuckb.5076 2 жыл бұрын

Well done. Great video. I think its work it.

@TheLawnmowerLady 2 жыл бұрын

Atlas Pro is a new one for me. Good save.

@bobshelton2812 2 жыл бұрын

Good video, buddy. However, the cost of the parts and labor is probably more than the mower is worth - unless a person does the work himself

@davidcurnutt9584 2 жыл бұрын

I would totally do it just for the challenge.

@doublewide6 2 жыл бұрын

Yes, me too!

@snoopysrc 2 жыл бұрын

I gotta brute lawn mower needed nothing accept a spark plug oil change and air filter runs great

@jeremyanthony9300 2 жыл бұрын

Those engines have got to be the easiest engines to work on. Carbs are a lot easier to install than the Honda gcv 190 engines.

@doublewide6 2 жыл бұрын

Pretty easy. The old engines have better gaskets than the new ones they barely ever need to be replaced if they were made in the 80's

@JCcanU 2 жыл бұрын

the Blades had a wider gap at 5:49 if the center plate holds the angle how did it get off kilter at 7:00 minutes in .

@doublewide6 2 жыл бұрын

I don't know I am going to check it out tomorrow. I thought it was on wrong at first when I took them off. Not sure until I check.

@rickeykeeton4770 2 жыл бұрын

Do you ever sand the flywheel and coil? I have but am sounder I have if it is really necessary if they are not rusted together. I usually sand and reset coil.

@henrymurawskibigdogrepair 2 жыл бұрын

Nice work but 2hr .If it wasn’t for being a good one it would have been a parts mower

@doublewide6 2 жыл бұрын

Henry it makes great video content.

@timothyharris8179 2 жыл бұрын

Got a hyper tough Walmart 300 series mower that only runs with the safety wire unplug, put a new wire on it and , still no spark with a new wire

@doublewide6 2 жыл бұрын

The wire on the coil is torn or touching metal somewhere. Follow that wire to find the damage. It is not the brake cable.

@MrJonrocker 2 жыл бұрын

Very nice! What is a good, solid, reliable push mower these days? Not looking for a lot of bells and whistles, just a good machine.

@doublewide6 2 жыл бұрын

A used Honda will be just fine.

@watermanone7567 2 жыл бұрын

Nice fix, what number spark plug does that engine use? Thanks

@doublewide6 2 жыл бұрын

I put in a RJ19LM

@frankie7508 4 ай бұрын

Two hours of repair time plusports makes the rejuvenation of the smaller break even. Why? Because other parts could break Or need to be replaced , such as the drive system or the cables Going forward. Personally I would have not invested Unless I could have done to work myself.

@albersmark2 2 жыл бұрын

You did not install the blades correctly. They should not touch at the tips like you installed them. Look at the start of the video and compare. Looks like you started to put them on correctly but let them turn just before you over tightened the bolt.