LEGO Technic crane explores deep chasm cave entrance.

Рет қаралды 172,877

Ай бұрын

On the slopes of Mt Hymmetos lay various caves and chasms. One of the most renowned is the Asteriou Monastery chasm cave, which consists of three chambers. The entrance to the first and largest chamber is a small crack in the rocks about 1.5 meters long and 0.5 meters wide. After this crack comes a sheer drop of more than 20 meters to the bottom of the chamber. As a first step to exploring this cave, I designed and built a small mobile crane to lower a bright LED light and action camera through its entrance. The second step will be to design a bigger crane capable of lowering a small and lightweight vehicle to further explore the first chamber of that cave! Stay tuned for more and enjoy!
Cave exploration crane specs :
Tracks : 2x LEGO XL motors
Battery : 3-cell LiPo
Remote Controller : FlySky FS-i6 with 6-channel receiver
Electronic Speed Controls (ESCs) : 2x Hobbywing Quicrun 1060
Crane boom control : 1x LEGO L motor directly on battery pack
Winch control : 1x LEGO XL motor directly on battery pack
Footage was shot on DJI Mavic Mini drone (aerial), DJI Action 2 (cave),
and Google Pixel 6a cellphone (build process and various vehicle shots).
Follow me on Instagram, Facebook, or X for sneak peeks on upcoming projects at Brick & Gear.
End music : Little Umbrellas by TrackTribe
#lego #legotechnic #rc #afol #adultfanoflego #legopowerfunctions #powerfunctions #technic #legolife #legomania #legorc #asmr #engineering #concept #testing #experiment #exploration #caveexploration #dji #mavic #mavicmini #djimavicmini #action2 #djiaction2 #tracked #tank #rctank #cave #chasm #chasmcave #mountains #mountain

Пікірлер: 69

@EVP22 Ай бұрын

I'm glad you did a mission recap. Because I would have been disappointed otherwise. Yes please continue developing this project to reach the bottom! You will regret it more if you don't try, than to try and lose your vehicle, light and camera. Hope to see the next video on this adventure soon!

@brickandgear Ай бұрын

I am actually in the pre-design process of the vehicle that will descend in the cave. I'm brainstorming on a vehicle that will use a belt to rappel to the bottom of the cave. No winch-breaking or rope-snapping to worry about. Just drop a 30 meter long belt in the cave and have the vehicle rappel down.

@YourFriendlyOfficeAssistant Ай бұрын

Suspension looks a lot like the Churchill tank during the Second World War. There are rubber studs that you can put on LEGO tracks to give more traction. Had you considered doing this?

@brickandgear Ай бұрын

I've seen those rubber pads but haven't got any. I don't know if they would work well outdoors though. Some of them would probably get pulled out of place and end up getting lost.

@BrooksMoses Ай бұрын

@@brickandgear : For real tracked vehicles, rubber pads seem mostly useful on things like smooth concrete. I wonder if something almost the opposite, like putting "teeth" on the tracks, would work. I could imagine putting pins through the holes in the ends of the 5-wide track segments, or even pinning a piece to them, but only one every second or third segment so that there are gaps that can sort of hook around small rocks or projections.

@brickandgear Ай бұрын

@brooksmoses I tried placing black pins on the tracks in the past (before starting my channel). It worked pretty well and the cost of damaging just some pins is acceptable. You think I should start using them again?

@CaptianGhosty Ай бұрын

This is what we live for

@brickandgear Ай бұрын

I'm definitely doing a Part - II. Imagine lowering a vehicle down there...

@JS-yg1jx 28 күн бұрын

Great job😮😮😊

@brickandgear 28 күн бұрын

Thank you! I am currently developing the next vehicle that will probably go down all the way to the bottom of the cave!

@user-ie3iz3wj2h Ай бұрын

Bro it must take so much effort to do this this video is so cool 😲 keep making these cool videos

@brickandgear Ай бұрын

Unfortunately, my latest projects took a lot of time. I'm getting used to building "proper" RC vehicles that can cope with the elements, but I'm getting there!

@o.-_-Idk-_-.o Ай бұрын

I have arrived

@brickandgear Ай бұрын

Hello!

@cozsmirk7749 Ай бұрын

Good job bro I like the designe

@brickandgear Ай бұрын

Thank you! 🙏

@Five_ar.original 18 күн бұрын

Как всегда всё офигенно 👍 хорош

@brickandgear 9 күн бұрын

Спасибо!

@Five_ar.original 9 күн бұрын

Незачто

@lukevidal2986 4 күн бұрын

You know I know that in Japan the people would have images of dragons and with your skills and intellect you could make a dragon that would be kinda cool to see a dragon walking on the ground

@Muff_Puff Ай бұрын

GUESS WHOS BACKKKK

@brickandgear Ай бұрын

Who?!?!? 😁

@vert2552 Ай бұрын

One more thing i would try to do is to make a rotor (slash gear) on the botom to at least look around. You could get it done remotly but it would be heavy, but you could also add another, 3rd, 'rope' to use basic spool to turn the camera with relativly not much added weight on the head

@brickandgear Ай бұрын

I will definitely install a servo to turn the camera in my next vehicle. I am currently in the "thought process" to start designing the vehicle that will descend in the cave using a belt to rappel to the bottom. Very excited for that project!

@vert2552 Ай бұрын

@@brickandgear Cant wait to see more! :D

@user-vs5mt3wf6q Ай бұрын

Cool

@brickandgear Ай бұрын

Thank you!

@charliemudd8063 Ай бұрын

a good first attempt, i look forward to a possible followup. in the brief shot around 7:08, showing us how the shape of the chasm was preventing you from lowering the camera & light further, it was difficult to see how close the string was to the walls of the chasm. i was wondering if, instead of a fixed length boom, an extendable boom like the ones seen in sets 42009 or 42082, would be helpful in maneuvering the camera & light pass the irregular walls? also, the summary at the end of the video was a good inclusion.

@brickandgear Ай бұрын

For my second attempt I am designing a small vehicle that will rappel down the chasm just like a climber. As a third step, I'll probably design a heavy crane (not portable) that will bring the vehicle back up.

@justinmochi7323 Ай бұрын

I think more autonomy would be cool. A camera on the crane itself so you could steer remotely like on the ship would be cool, as well as rc controls for the boom and maybe incorporate outriggers! Possibilities with this are endless i wish you luck

@brickandgear Ай бұрын

Thank you!!!

@ranban71 Ай бұрын

Здравствуйте! Я обычный пацан из Казахстана, и хочу вам сказать, вы большой молодец, респект вам!! 👍 Я удивлен тем что вам удается строить, и это круто! Желаю вам успехов, вить правда вам скажу, вы создаете очень крутые вещи :D *Продолжайте в том же духе!* Hello! I am an ordinary kid from Kazakhstan, and I want to tell you, you are a great fellow, respect to you!! 👍 I'm surprised that you manage to build, and it's cool! I wish you success, I'll tell you the truth, you create very cool things :D *Keep up the good work!*

@brickandgear Ай бұрын

Hello! I am an ordinary guy from Greece! Thank you for visiting my channel! Hopefully, I can visit Kazakhstan in the future and bring one of my boats to Lake Kaindy!

@ranban71 Ай бұрын

@@brickandgear Okay, this will be very cool!!

@ranban71 Ай бұрын

by the way, the idea of lowering some kind of machine on a winch is a really cool idea!!!

@brickandgear Ай бұрын

It'll need a lot of R&D but if it works, it'll be really cool to watch footage from a 30 meter deep cave!

@Kraftedwiki Ай бұрын

I wonder if a mini gyro stabilizer would help keep the phone steady. There has to be a youtube video to diy one by now right?

@brickandgear Ай бұрын

I use a gimbal.

@callmevbuck4054 Ай бұрын

If it can go through rocky terrain, its capable enough to travel the entire horizontal length of Texas. Just make sure it doesn’t get lost. P.S, how long did it take you to wind up all that rope?

@brickandgear Ай бұрын

It took a few minutes. I used a gear ratio that would lower the camera as fast as possible because the Action 2 overheats after about 20 minutes of 2.7K recording.

@callmevbuck4054 Ай бұрын

Fair enough.@@brickandgear

@ochko2238 4 күн бұрын

ωραίος

@brickandgear 3 күн бұрын

Ευχαριστώ!

@user-se5lv6om5r 3 күн бұрын

Hi, I want to ask for help with the project, I'm reviving the Titanic, I made it move the blades from the motors, but I need your advice, please good luck you have a little bit left until 30k

@brickandgear 2 күн бұрын

Good luck with your Titanic project! What help do you need?

@shanemyself9681 Ай бұрын

What were those weird letters on the map at the beginning?

@brickandgear Ай бұрын

It's Greek.

@shanemyself9681 Ай бұрын

Oh I thought it was Russian or Ukrainian or something similar thanks

@brickandgear Ай бұрын

@@shanemyself9681 the Cyrillic alphabet was based on the Greek alphabet, so you'll find a lot of similarities between them.

@lukevidal2986 Ай бұрын

So did find a solution

@brickandgear Ай бұрын

Yeap!

@roy11gg Ай бұрын

Hello mr. Brick & Gear, let see where that crane is going...

@brickandgear Ай бұрын

The first steps of a bigger project!

@user-zt9os4xs1y Ай бұрын

Сколько комьютеров ты разобрал?

@brickandgear Ай бұрын

Честно говоря, не помню.

@user-kj8jw4jo2r 15 күн бұрын

@brickandgear 9 күн бұрын

Hello!

@Real_Cheezy Ай бұрын

18th

@user-ed8jw2lh4z 18 күн бұрын

Vidio nya hitam cok

@brickandgear 9 күн бұрын

Apa maksudnya warnanya hitam?

@MarijnRoorda Ай бұрын

Meh, you made a crane.. At this point i would have come to expect an Ai controlled robot that lowers itself from a overhung bridge and able to steer itself away from ledges with its many claws. Naturally, all made from Lego's.

@brickandgear Ай бұрын

I could also build a B.A.S.E. jumping robot that deploys its parachute three meters from the bottom and crashes spectacularly spreading thousands of LEGO pieces in the cave...

@MarijnRoorda Ай бұрын

@@brickandgear That would be awful. Just seeing Lego's in the environment triggers some weird response in my brain. They should be kept in a controlled environment, away from the sun, like your room. They can collect dust, minor insect life, bandaids, that just adds flavor. But throwing Lego's, brightly colored pieces of plastic in a natural environment, almost feels like a crime.

@brickandgear Ай бұрын

@@MarijnRoorda in the end, they are toys. Toys are meant to be played with, in any environment.

@MarijnRoorda Ай бұрын

@@brickandgear I do agree. However, you can just leave them lying around in your room. However, leaving them in the environment should be refrained from. As a kid my mom made me clean up my room at least once a year, and i never understood why cause then i would have to get all my Lego's out the next day to return to where i was. There was a very careful weeding out process, all my Lego came in several huge crates, you'd throw it out on the floor, and you start searching for parts. Eventually, at the end of my room, all the good parts would end up, (where the giant spaceships would materialize) and the junk ones would stay at the entrance. (A side benefit was that my parents would stay out of my room in fear of stepping on Lego's.) You can't very well exhibit such behavior in a garden, or a mountaintop.

@infinitedonuts9929 Ай бұрын

@@MarijnRoorda🤓