Lifetime Horizontal Storage Shed | Lifetime Assembly Video

Рет қаралды 97,497

Күн бұрын

Пікірлер: 77

@williamlefevers3492 Жыл бұрын

Excellent video. Everything was laid out properly and made assembling this complex kit a breeze. The gentleman walked through the steps in a very logical, measured pace. This is the second Lifetime shed I have assembled and am impressed with the clarity and order of the pieces in small bags. The best do it yourself kit I have ever seen.

@Kruminater1776 2 жыл бұрын

So just finished building it, using your video as reference. I will say this: 1. You need to maybe label the screws in the packages, also separate them. Having it all in one bag for the whole section is a nightmare. 2. Your demonstration video is fast, which is fine, but you need to slow down and zoom in on some of the screws, as it can be difficult due to the aforementioned non labeled bits. I was also missing several screws, so I improvised with pre existing ones I had. 3. The instruction booklet has the screw diagrams which is nice but it’s still difficult to decipher which is which at times. Overall it’s a great and solid small shed. I’m happy about it.

@elizabethc8 2 жыл бұрын

YES to the labelling and separating of the screws! Jeez o pete!

@guyfroml 2 жыл бұрын

Absolutely! Due to the screws at times being difficult to decipher, I used the Lord's name in vain more than a few times. What I discovered is the diagram drawings of the screws and the rest of the hardware are supposed to be shown to scale (or very close to it), so that helped. But, I'm with you Issac, putting each type of screw and nut in separate bags would help. It would be perfectly fine to place ALL the same kind of screws that would be used through the entire construction in the same bag but have the instructions at each step indicate how many you will use during that step. ALSO, another great suggestion to Lifetime is to mention the specification of the screw or nut or bolt (standard or metric and size/number). This way if something is missing, we'll know exactly what type and size we need to go pick-up at the hardware store. Fortunately for me there were no shortages. Like you, overall, a great shed, especially for the price. Mine was $350 at Sam's Club. Another $50 if it has to be delivered.

@tiffanymoncrieffe9033 Жыл бұрын

My thoughts exactly! I can’t tell a lot of the screws apart and now I put several holes in the top cover and have to go back and caulk it. I’m so sad because it looks bad 😢

@denniscanfield2299 Жыл бұрын

@@tiffanymoncrieffe9033 Just use paintable caulk and pick a close color of fusion paint at walmart and coat the top. You'll never see the patches!

@donnalutheran6335 Жыл бұрын

I'm finding this extremely different. There are no screw holes in places the diagram says there should be. Not all parts are labeled and I have to guess what goes where.

@darynharvey3103 2 жыл бұрын

Super helpful. I was able to do it by myself by getting a little creative at times. This video was a great substitution for reading the manual and hoping that I don’t mess up or read something wrong. Thumbs up

@randyr6610 9 ай бұрын

I just put this shed up and had to follow your video at times. Thank you for sharing this.

@RobertBachrach 11 ай бұрын

The paper instructions are not very clear, so this video is extremely helpful in putting the shed together. I bought two units and on both the slots for the lid supports (EYG) were blocked. On one side I was able to push in the block with the end on EYG. On the other side I had to use a screwdriver and hammer to push the blockage in.

@DavidFlores-qj1vu Жыл бұрын

Everything on the video was alright and clear about how to assemble, but the issue on my shed was the right hinge and the left, was the the holes were not aligned with the hardware. I had to to do an adjustment not wanting to bother to bring it back to the store since I already threw the box.

@dennismaxwell165 11 ай бұрын

Excellent video!! I did this myself, still took 2 half days to complete.

@cmerighe2 Жыл бұрын

There are several issues. Some of the screws get stripped too easily. The doors are shaky to say the least. I say it is back to the drawing board.

@johnhunt1110 2 жыл бұрын

Awesome help!!! I would buy their products based on the video support alone. Thank you for being proactive.

@GhostAssassin757 7 ай бұрын

Thank God for this video because the paper instructions are trash

@Jidedawodu Жыл бұрын

Took me 5 hrs to finish because I did most of the set up by myself but I’m happy now

@brentwilkinson7874 10 ай бұрын

Lot’s of hardware and lots of work. Took me 5-1/2 hours to assemble. However, the video was very helpful. Could not have done this with just the manual. I paused the video in each step, but still missed 2 steps. My only problem was securing the door hinges to the doors. Very difficult to get the screw to go into the hole on the metal bracket. My only concern is that the metal plate attached to the left door where the doors meet is only secured with screws into plastic. Very flimsy connection.

@thewisewreathkristinginter7955 5 ай бұрын

YES,EXCELLENT, THANK YOU!

@sairadavison1673 2 жыл бұрын

This video was made it so easy for me to assemble my new storage shed by myself. Thank you so much for having clear step by step instructions especially for us visual learners. ❤️

@bobstephens3804 Жыл бұрын

Well done everyone. Good job!

@steplaland Жыл бұрын

I had to play in .5x speed just to keep pace. Maybe include a picture from the manual from each section so that i don’t have to look separately. Other than matching the parts, I mainly relied on your video instead of manual. 👍

@jeffw8057 Жыл бұрын

How do the bottom of the doors stay shut? Are there pins or some other means that prevent critters from squeezing through?

@luisaaa6748 2 жыл бұрын

Thank you

@user-fr6fc1hf3h 2 ай бұрын

Well, done video however had trouble sliding the hinge rails into the slots as the slots were covered with plastic which we removed by heating up the end of the rails and with a torch and sliding them through the blocked plastic

@mikeletterman726 Жыл бұрын

Awesome video thanks 🙏

@Nov_18_25 Жыл бұрын

Can they be used for storage of luggage bags too?

@minniepurl61 2 жыл бұрын

SLOW DOWN! AND ON THE SCREW BAGS ID WHATS IN THE BAGS ... SINGLE BAGS FOR EACH TYPE! THEN THE POWER LID HOLDERS WERE STUCK WOULD NOT GO DOWN, AFTER MUCH FUSSING AND REMOVING AND REATCHING FINALLY WORKED. NOW THE RIGHT FRONT DOOR SAGS!

@LifetimeProductsAssembly 2 жыл бұрын

We’d love to take a better look at your assembly to see what may be going on. Please send pictures over to our shed experts so we can troubleshoot some ideas. They can be reached at +1 (800) 242-3865 or by email at customercare@lifetime.com.

@jaymopar3543 10 ай бұрын

This video is very helpful. I just hope they separated all the screws and label each bag with whatever type of screws that needed not with the whole bag and looking for what size of screws that u need when some of the screws are pretty much the same. I'm just sayin. Thanks for this video

@101rdrd Жыл бұрын

The video was helpful, but I wound up with 2 left hand brackets for the center support (which I had to mickey mouse together), the slots for the latch brackets weren't punched so I had to do that, and the hinge brackets definitely needed washers, which I had to supply. Other than that, it went ok.

@kerstinlack4225 2 ай бұрын

Anyone know if this is the same shed sold at Costco Canada? The pic on Costco website looks a little differ than the one in video. The top is more rounded in the video shed.

@LifetimeProductsAssembly 2 ай бұрын

Yes Costco Canada sells it .

@emmettpickerel5016 Жыл бұрын

Just finished assembling mine! Great organisation of the bits and bobs -- it appears that you took commenters' suggestions to put screws for each of the 3 steps into separate bags, and that helped immensely. Unfortunately I do have one issue, and that is that the locking tab is a little too low for the keeper to go completely over it without really pulling the door up. It's not a deal breaker but was a surprising shortcoming after the rest of the build quality.

@andrewdiehl5746 Жыл бұрын

I am having the exact same issue...

@emmettpickerel5016 2 ай бұрын

Nearly two years later, I am in the middle of taking this apart to re-assemble it up the top of two flights of stairs. Further thoughts on the design (and no, the latch has never, not once, come down easily for locking): it is designed for ease of assembly. I'm not saying it's the wrong decision, but there is absolutely zero thought into how you'd break this down to move it. And it's far too heavy to move as a single unit, unless you're scooting it along a flat surface.

@awakenchange 2 жыл бұрын

I would like to buy this but the 2 separate lids concerns me. I have read reviews that there is leakage from this weak spot. Anyone tell me differently?

@WayOutWest1221 3 ай бұрын

put a bead of silicone caulk down to middle and problem solved.

@nothating 2 жыл бұрын

I like that there were separate steps. However, the hardware for each step should be labeled for each step. For example, hardware, "ADZ", was needed for different steps but in my kit they all came in one bag along with other screws. I'm not the person who has an eagle eye for screws and many look the same to me. Screw ADX and ADZ could be confused. I am not an engineer. Was this to save money or something. else? Not being factious. I really want to know why the hardware kits came like they did. thank you

@duanepaulus4906 Жыл бұрын

The video was helpful, BUT ... the screws need to be labeled or at least divided by specific sections. I don't know if I was using the correct screws or not, but I ran out and had to run to Lowe's a few times to get the correct one.

@LifetimeProductsAssembly Жыл бұрын

The hardware bag you'll need will be shown at the begging of each section and the top of each page. To make sure you're using the right hardware, you can match up the hardware to the picture since the images on top of each page is the actual size of the hardware.

@oldtimerlee8820 3 жыл бұрын

I'm considering buying one of these. As it is put together can caulking be used between the various sections to make it more waterproof?

@LifetimeProductsAssembly 3 жыл бұрын

Yes.

@jrr1222 3 жыл бұрын

My shed went together fine but I find that the bottom of the doors doesn’t want to stay tight. It’s almost like it’s missing something to stay put. Do you have any advice on how to ensure they don’t stick out?

@LifetimeProductsAssembly 3 жыл бұрын

It's easier for us to determine the issue when we receive images. That way we can see what's happening and we can trouble shoot some ideas. Reach out to our customer service team and they can tell you where to send pictures and give you some resolutions! They can be reached at 800-225-3865. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@tehan2 Жыл бұрын

Great Video, my 60341 arrived yesterday . Seeing how I'm local and it took you 20:14 to assemble, want to come on over and make a few bucks putting mine together?

@tehan2 Жыл бұрын

never mind. 1.75 hours assembly by myself. Used my wife of 5 minutes to assist lifting the lid. I found video to be great for section 1 and 3 and instruction sheets better for section 2

@elizabethc8 2 жыл бұрын

Solid video, but I cannot reiterate Isaac's point enough.... labeling and separating the screws would seriously improve the process, and make people hate you less.

@peatee07 2 жыл бұрын

Is there a video to align the lid latch? I am having issues closing the latch-I have to pull roof down and use my weight to close lid latch.

@LifetimeProductsAssembly 2 жыл бұрын

Unfortunately, we don’t have one at the moment! Please reach out to our customer service team and they can give you tips and tricks on how to get the lid aligned. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@andrewdiehl5746 Жыл бұрын

@@LifetimeProductsAssembly Seems like a ton of people are having this issue

@kimberlyhiggins3460 Жыл бұрын

Has anyone had issues with getting the horizontal support tubes to align to the holes? It looks like the sides have pre-drilled holes but the support tubes don't align to all 3 side holes. The back looks like you have to drill into holes that are no pre-drilled? The video and manaul don't specify.

@LifetimeProductsAssembly Жыл бұрын

If you're unable to get the holes to line up exactly, that is okay. Try to get as close as possible to the hole on the wall panel. If the spacing is very far apart, reach out to our customer service team for more tips. They can be reached at +1 (800) 242-3865 or at customercare@lifetime.com.

@jonapp1497 11 ай бұрын

Did anyone have a problem getting the lid support (EYG) into the slits?

@RobertBachrach 11 ай бұрын

Yes, the slits are not formed properly and are blocked. I think the blockage needs to be pushed in.

@raytube918 2 жыл бұрын

Can these set directly on grass

@LifetimeProductsAssembly 2 жыл бұрын

Yes. It’s recommended that you built on concrete for a level surface but, once completed you can move it to grass. Just keep in my there is no anchoring set for this system.

@alexfletcher7637 11 ай бұрын

Good video thanks me and my home boy built this licketie splicketie for the babe god is good

@lilmamma807 2 жыл бұрын

Can it conceal 2 45gal trash cans?

@LifetimeProductsAssembly 2 жыл бұрын

Yes! Funny enough, these are designed to hold trash cans.

@lilmamma807 2 жыл бұрын

@@LifetimeProductsAssembly thank you

@rmstevens83 2 ай бұрын

Too bad there are no hooks application for this shed module.

@LifetimeProductsAssembly 2 ай бұрын

We apologize, but the wall hooks are not compatible with this model.

@SS-tr5uw 3 жыл бұрын

I am currently in process of assembling my horizontal shed. so far so good. however, one comment I have is that when installing the hinges, I found it easier to partially install the hinges first, before the vertical bar, due to the fact that you have to try to line up the screws from the hinge and through the 2 small holes in the vertical bar. it took a bit of back and forth to get those through, after that I proceeded to secure the bar to the door. I understand that this is essential because you want those hinges to be secured to structure.

@bernardojrodriguez Ай бұрын

Guys, why make this so complicated. It takes too long to build. In my case, one part was wrong so I had to return to Costco. This is a cheap overcomplicated thing. #fail

@1969jmac Жыл бұрын

This video was useless. Doesn't tell you what screw to use when or when they are starting on a different parts bag etc...

@LifetimeProductsAssembly Жыл бұрын

Thank you for the feedback. Although we don't verbally state the hardware, we show images on the right side of the screen of all the hardware we'll be using. You can also refer to your manual as this video is a companion to it. We will see on our end what else we can do to help better our future videos.

@betsyyoung9753 2 жыл бұрын

Can pay for production of this video but can’t pay for simple labeled baggies for the hardware. It blows my mind that a big company could be this dumb. You just added about 30 mins to my install because you just threw random bolts and screws into one bag with no labels. Probably be the last Lifetime product I’ll ever buy. Made the install extremely frustrating .

@LifetimeProductsAssembly Жыл бұрын

I'm sorry to hear this. We're always looking for more ways to improve in our videos and in production. We will take your review to our packaging team and we'll see how we can better improve this experience for our customers.

@jeffreybishop9478 6 ай бұрын

This products metal door supports needed to be ground down to have the doors operate correctly. I needed to grind bottom floor groves so the side panels to fit into the bottom. I received two lid tops that were the same. I’m waiting for customer service to replace the lid that is wrong. Buyer beware of this company. 👎🏻👎🏻😡🤬

@v.p9412 Ай бұрын

If youre thinking to assemble this DONT and return it back to Costco or where you bought it from. This is not a lifetime shed - its soft plastic with screws. Whoever though about screwing metal in soft plastic is dumb. I am using a screwdriver instead of drill since with drill at speed 1 is spinning forever. Even with the screwdriver you have to be so soft but some screws are still spinning indefinitely. Dony buy it since i am sure this junk will not lost more than a season. Go for wood - even if will not be forever will last more than this junk