I correct the clutch pedal box lever, rebuild the clutch master cylinder and smarten up the brake booster. I then proceed to re-assemble all these components. I suffer a small setback along the way but we are getting there :-)
Пікірлер: 5
@sennahoj97 Жыл бұрын
Big thums up!
@neildonaldsonlotusexcelresto Жыл бұрын
Thanks Johannes... I will give your dad a call soon and see how he is getting along in his retirement 🙂
@EVguru Жыл бұрын
I didn't see the reinforcing plate for the clutch master cylinder. Some people cut an access hole in the top of the firewall to get at the throttle cable clevis.
@neildonaldsonlotusexcelresto Жыл бұрын
Thanks Paul... I have just checked the parts diagram and sure enough, there should be a plate and a gasket behind the clutch master. I will probably have to fabricate one as it definitely was not there when I removed it and I am risking fatigue damage if it is left off. It looks like someone has attempted this job on my car already and made a bit of a hash of it. Once again, thanks for your advice!
@neildonaldsonlotusexcelresto Жыл бұрын
I just checked again Paul... The plate was glued to the bulkhead so all good... I have now managed to attach the cable without dismantling anything, but it is quite tricky.