These Heads Are Way Too Nice for My Old Tahoe’s Engine

Рет қаралды 30,477

Күн бұрын

Check out HeadGames Motorworks!
headgamesmotorworks.com/
/ @headgames
headgamesmo...
Check out AFP's Motor Mounts!
atomicfabandperformance.com/p...
New Trans AM T-shirt and other Lsxmatt merchandise:
lsxmatt.com/products/lsxmatt-...
Check out my Instagram page for behind the scenes photos and updates:
/ lsxmattoffi. .
Parts:
Ticon manifold bolts:
headgamesmotorworks.com/produ...
LS9 head gaskets:
amzn.to/3wFAqpL
PO BOX:
Matthew G
PO Box 140055
Staten Island, NY 10314
Chapters:
0:00 Intro
0:37 Recap
1:14 New Heads Ft. HeadGames
2:34 Valve Job
3:43 Blending
7:32 Milling/Assembly
10:34 Engine Assembly
15:26 Pushrod Length
18:38 Exhaust Manifold Stud Repair
22:11 New Torque Converter
24:17 Engine Stall
25:41 Ticon Exhaust Manifold Bolts
28:08 First Start

Пікірлер: 123

@wtdonovan Жыл бұрын

I'm here to support your decisions, like titanium bolts on the exhaust while leaving a raw block without paint.

@lsXmatt Жыл бұрын

With a 250k bottom end😂

@wtdonovan Жыл бұрын

@@lsXmatt 🤣

@hungryhungryhummer Жыл бұрын

@@lsXmatt barely broken in👍

@dbdavis3411 Жыл бұрын

I’ve been a fan for years. I just want to say Ty! I’ve picked up so many small tips and even products you’ve had videos on. I just started my own build on my 04 lm7 and after removing the motor I was on the fence about the mounts. I will be ordering some AFP’s asap. Also hp tuners is a hit or miss for my truck. I went the tunerpro and pcmhammer route and with a little research and a spare pcm.. and I have complete confidence in getting it going enough to drive to a tuner. Great work man can’t wait for more

@benhinrichs9262 Жыл бұрын

I like the converter joke.

@hailstorm1986 Жыл бұрын

I'm super happy Tahiti is alive again!! 😇

@minetwisted Жыл бұрын

I’ve never clicked on a video so fast

@charlesholzer5409 Жыл бұрын

Literally same 😂

@russellholloway9775 Жыл бұрын

Same

@harryfp1494 Жыл бұрын

Cap

@Woaddy..432Hz Жыл бұрын

That’s for sure. 2020 Trailboss 416 stroker 800+HP Street/Daily searching for info on head porting my stock 6.2 or New??

@Crypticdragon1 Жыл бұрын

Sweet! Love to see her back up and purring.

@jordanhart2979 Жыл бұрын

El oh el at the torque converter sitting. That truck cam from TSP? 😂😂😂😂

@ibrahimbel3336 Жыл бұрын

Amazing very nice job. I am so happy to see engine running 😊fantastic. 👍🏻

@keyboiz916 Жыл бұрын

On my 2004 Tahoe z71 I used a Volant 3285661 Cold Air Intake with Ram Air Scoop Combo Kit with powercore filter. Looks good easy to throw in.

@tonywells9876 Жыл бұрын

Excited to see the Trans Am return to the channel. More excited to see your Camaro back!!

@Heathfx5 Жыл бұрын

For your hp tuners error...it might actually be because you have an aftermarket radio and if you also have a module to preserve the door chime, that module blasts the communication bus with noise. The solution is to pull your radio fuse when you want to read or flash your PCM. It solved my issues for flashing the PCM in my 05 tahoe. if nothing else, its not that hard to build a bench harness for flashing the PCM if you have a donor vehicle you can steal the blue plug and obd-ii port from. Then get yourself a 2A 12VDC power adapter and a toggle switch for ignition on-off control.

@dammitcarl1082 9 ай бұрын

This was my experience with my suburban as well. I have the same sony aftermarket radio and my tuner had to pull the fuse to flash the PCM when I was getting it dyno'd.

@moveit05 Жыл бұрын

Awesome video.. great to see the tahoe still getting upgrades 👍

@expediteplanb7443 Жыл бұрын

Pull the radio fuse; I have to pull mine every time I take my supercharged 2006 Tahoe to the tuners. Promise it works.

@jacobn3160 Жыл бұрын

I’ve heard the cig lighter fuse can cause this as well. Atleast it does on 99-02 trucks

@hephaestus4587 Жыл бұрын

Wow Matt, getting Super close to that Play Button. I reckon end of February for sure. Another great video too.

@robsshop8704 Жыл бұрын

Air aid makes a modular intake tube that fits in place of the air filter box and throttle body. I put one on my Yukon and it did make a slight improvement on a stock 5.3 with a 3 inch exhaust, little more grunt and get up at 2,000 rpm. Don’t know if you’d like that idea but it’s a much better way to get smoother airflow to the engine plus it does clean the engine bay up some

@jennyloughry896 Жыл бұрын

Great video as always can’t wait til the turbo goes on

@jarriouscoleman1465 Жыл бұрын

Idk why this popped up and played automatically, but damnit I watched the whole thing. I think KZfaq heard my talkin about ported heads with a customer just a few minutes before this video popped up.

@donovanwolfe44 Жыл бұрын

Had the same protocol issue with my buddies hemi swapped Jeep and he was missing some grounds for the engine. Once he put them on I was able to connect. Recently did a cam swap in my avalanche and didn’t have the protocol issue, even with some aftermarket accessories.

@vandettabuilds6641 Жыл бұрын

You always put out a very good video!!! Thank you

@fresh55n9ne Жыл бұрын

I’ve been tuning in since the first video on this Tahoe.

@HeadFlowInc Жыл бұрын

You lower the compression in the engine by running an LS9 gasket on a 5.3 cylinder bore. Also you have less gasket material to seal in between the cylinders. A quality GM or Mahle MLS gasket with a fire ring 3.835”-3.900” is highly recommended for the 4.8/5.3 cylinder bore. JD

@DesperadoGarageOfficial Жыл бұрын

One thing that I changed for exhaust is that I went with a cat back system from DNA motoring and it is a race exhaust. Somewhat quiet but has a nice lope to it then when you step on it it sounds amazing. I can make a video of it soon. I did a video of a muffler delete.

@da1st482 Жыл бұрын

Damn they are out of stock on the titanium bolts lol. Just my luck. Great video and info man . Thanks 🙏

@wankerwithawankel Жыл бұрын

I love this series! I’m thinking about buying a gmt800 Yukon to modify

@sweetdees86 Жыл бұрын

Your the man! You inspire me to sit patiently in front of my phone and wait till you post a new video!!! Jk. I’m working on my own projects because of your videos. 😊

@GameTightMusicGroup Жыл бұрын

Hey Matt, love your channel by the way. I have a 2001 Chevy Tahoe with a 5.3 v 8. I have disk brakes front and back. Can I upgrade the back brakes like you did the front brakes to the newer calipers like you did with your front brakes ? is it a direct fit also ?

@lakarma0118 Жыл бұрын

How much were the head milled to and what pushrod did you end up using?

@leoperalta7541 Жыл бұрын

Love the video. I've been watching your channel for a while now. Question, have you thought about tuning the transmission shift points? Hptuner has that option. I have an 03 GMC Denali and have done a lot of similar upgrades since watching, and the transmission mods have also improved performance. What would you recommend If you did something like that??

@bobbylaird4801 Жыл бұрын

My issue on my 2005 was the radio. I put the OEM radio back in and was able to tune

@Heathfx5 Жыл бұрын

pulling the radio fuse when flashing also works around the aftermarket radio issue.

@dizzydavid4668 Жыл бұрын

Wish I had the time and money to work on my 2002 Tahoe. It has so much potential

@charlesholzer5409 Жыл бұрын

I’m used to James Lube corner but I am very happy with Matt’s Lube corner

@mikebanks6704 Жыл бұрын

I have a 07 silverado classic hd with a l33 5.3l v8 and I want to swap that full swap with my 06 tagoe z71 will everything bolt rite back up??

@davidcallahan5157 Жыл бұрын

Matt put set of flat top pistons in it?

@thatguyintheduranghoe2.076 Жыл бұрын

Honestly makes me feel better. Doing same thing to my 02 with 245xxx

@brianhigginbotham4489 Жыл бұрын

Congrats on getting it goin! What was your take on the surface shield spray you used ? I was hoping to see a bit of that and what you thought of it? Keep us posted on how the titanium exhaust bolts work out also !

@lsXmatt Жыл бұрын

It’s messy but went on nice. Pretty thick and didn’t drip too much.

@jeromeirving4770 Жыл бұрын

The harbor freight vacuum filler for coolant actually works really good

@krnwhitlow Жыл бұрын

Super nice job love GM trucks

@ripkiwikiwi4171 Жыл бұрын

I just did the shocks on my Chevy suburban that has 390,000 km and they were the stock shocks. I should’ve checked them sooner so much smoother and softer a ride. I almost didn’t recognize it.

@heysoos223 Жыл бұрын

I have to pull my radio fuse, as well as my remote start fuses every time I tune, or data log. It’s a PITA, but I’ll bet that will get you going.

@RatdogDRB Жыл бұрын

Ahhh... she breathes once again ! Sweet heads. Love that oil pressure.

@shaneintegra Жыл бұрын

When filling these with coolant and bleeding the air out. You wanna completely fill the overflow Reservoir and then once there is no more air bubbles use something to suck out the extra coolant. Sometimes air will get trapped in the upper radiator hose so squeeze that

@sharpie132 Жыл бұрын

Can't wait for this thing to hit the road. I own a 04 z71 I'm thinking of chuck Norris cam. Is this cam better?

@lsXmatt Жыл бұрын

Truck norris would be a great cam. I went with the tick stage 2 because I already had it, plus it’s getting a turbo and I wanted a smooth sleeper idle.

@juanharris8876 Жыл бұрын

Hey Matt big fan of the channel...... I'm having the same issue with my exhaust manifold stud. Im stuck with a broken stud....what did u use to drill out the stud??

@lsXmatt Жыл бұрын

I always weld a nut on them, they come right out then.

@bawrenches Жыл бұрын

Success!

@trentdawg2832 Жыл бұрын

She lives……again!!!

@Daddy_oh789 Жыл бұрын

Not a Tahoe question but camaro lol what did you do for a driveshaft length on the trans am? I’m doing a ls3 mated to the 6L80 as well

@lsXmatt Жыл бұрын

I’m gonna have to send it to a shop to be shortened

@superior3384 Жыл бұрын

I'm waiting till see how it drives.

@evsnova74 Жыл бұрын

Bruh did the expired torque converter meme. Perfect execution

@leoarteaga4219 Жыл бұрын

The best deadpan delivery! 😆

@patricklaughrey8727 Жыл бұрын

I've reused head gaskets out of desperation I coated them in copper coat and that motor ran forever I swear by that stuff

@curtishunter2157 3 ай бұрын

How has this 250k mile motor held up with the new power from the top end. I am getting ready to install an LS1 from a camaro that has 200k. It runs great, but the miles concern me, so I was trying to decide between a reseal like you did or a full rebuild.

@lsXmatt 3 ай бұрын

She still putting along nicely. Great oil pressure, no more leaks!

@larrycollins819 Жыл бұрын

Matt where did u get the ashtray switches for the camaro?

@lsXmatt Жыл бұрын

Ebay- www.ebay.com/itm/333478384041?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=4HOxUXNMQsy&sssrc=2349624&ssuid=ypSWFaEfQEi&var=&widget_ver=artemis&media=COPY

@tonydalo Жыл бұрын

What did you put on the oil filter gasket before installing?

@lsXmatt Жыл бұрын

Just lube

@MiguelGarcia-nl3ci Жыл бұрын

This Tahoe has had so many problems lol

@kylejackson1236 Жыл бұрын

I had a problem connecting my tahoe to hp tuners recently I ended up finding that even though my battery was fully charged it was dropping just enough to break communication. I tried a battery charger set to start and it still wouldn't do it but when I jumped it to a running vehicle I was able to connect.

@TasteMyPP Жыл бұрын

Read comments. Radiator fuse

@aldoortega2170 Жыл бұрын

Q: did you put any thought into barbell type?.... aluminum, seal on both ends... why the plastic?

@lsXmatt Жыл бұрын

The oem one made it to 250k, so figured it was good enough. I used an aluminum one in my Camaro and it needed to be sanded down a few times until it fit.

@seangowan7441 4 ай бұрын

You need a Corsa Cat back exhaust.

@wdc9633 Жыл бұрын

Hey Matt, I was wondering if you could give me your thoughts on the value of the GMT 800 Tahoe. They seem to have hit rock bottom. I have an '05 with 168K and it books out at 3.5K trade in, and 5.5K retail here in Washington State, whereas a Silverado of similar year and mileage is going for about 2.5X as much. $5,500 is a lot of vehicle and capability for the money. Maybe one of the best buys. I could not let my beloved Tahoe go for anywhere close to that. Do you see these going up in value, considering that it's getting harder to find an unmolested one with under 200K?

@alfonsoalonzo3165 Жыл бұрын

Here in Texas..Been offered 8-10 cash on my 07 silverado classic...nothing special on it besides the condition 8/10..very popular here..seen some for 14000..

@hungryhungryhummer Жыл бұрын

How are you liking the new coils vs torsion bars? Was it worth the upgrade?

@lsXmatt Жыл бұрын

I’d say if you want better handling or looking to level the truck then it’s definitely worth it.

@jacobn3160 Жыл бұрын

@@lsXmatt Are the upper control arms still holding up well? I just bought a set

@travissheehan6082 Жыл бұрын

Surprised you didn't use the SacCity billet barbell

@JoseGarcia-jp8gs Жыл бұрын

Lol i hope the converter isn't bad from sitting 😂

@brentunderwood7600 Жыл бұрын

good video! needs exhuast done on it badly!

@gjoniny1534 Жыл бұрын

my tahoe just started saying reduced engine? won't go over 40 mph. shut it off restarted and then back to normal ?

@thomasblottman6741 Жыл бұрын

I have a bench harness I can let you use I won't need it for a month or two. It has the blue/green connection I don't know if you have the red. You just pop out the pcm hook it to the hp tuners and make any changes and flash. Have a on off for a ignition. Let me know I'll drop to your p.o. box.

@lsXmatt Жыл бұрын

Thanks but I managed to get it connected. I had to pull the radio fuse and disconnect the remote start wire from the obd.

@cancerculturefl Жыл бұрын

Been waiting for another tahoe video for a hot minute

@bradleyjones8207 Жыл бұрын

Ready for third gen content

@ThatLSTahoe Жыл бұрын

i have a 03 tahoe and the transmission is leaking toward the engine what would that be caused by

@cameronsaint116 Жыл бұрын

Rear main seal problably

@lsXmatt Жыл бұрын

Probably the torque converter seal

@AlexKloehn Жыл бұрын

Another common issue is the pump bolts, the bottom 4 have pressure behind them and if the o rings on the bolts get old they can leak. Common practice on rebuilds is to double seal the bolts with the o rings and a little bit of rtv

@shadowopsairman1583 Жыл бұрын

Hand blending makes me go ack

@MarkTisdelJr Жыл бұрын

Yesssssss!!!!!

@yergtret9091 Жыл бұрын

Can you run that torque converter in a stock 5.3?

@yergtret9091 Жыл бұрын

I have a 2006 Chevy suburban that needs the transmission rebuilt and I plan on doing some motor work in the future so I want to get a torque converter that is reliable and can handle more power. Do you have one you recommend or do you think the one you have will work?

@lsXmatt Жыл бұрын

I wouldn’t recommend it, I’m honestly not crazy about it. It’s pretty loose so it really needs some throttle to get the truck going. Depending on how low my mpg goes I may pull the trans to swap the stock one back in.

@brendan747 Жыл бұрын

i put a 3200 triple disc in my 80e behind a cammed 6.0. city driving is a nightmare.

@eazhar Жыл бұрын

I heard you’re not supposed to use copper spray on mls head gaskets

@tortron Жыл бұрын

I have heard to use it. Lol.

@lsXmatt Жыл бұрын

Yea it’s worked for me in both situations. You don’t need it but I feel like it won’t hurt anything.

@danielb-c9100 Жыл бұрын

It's the rest interior gonna get their the Seat shop

@lsXmatt Жыл бұрын

Yea eventually. Carpet and headliner need to be done first.

@troyhuntley1 3 ай бұрын

Paint would of been nice, but I get it.

@kimrunealund5575 Жыл бұрын

Who doesen't love a Nice head😅

@mrphiscal Жыл бұрын

Imho the hp tuner issued is vats. Im willing to bet money on it

@lsXmatt Жыл бұрын

I figured it out, I had to pull the fuse for my radio and disconnect the remote start wire going to the obd port.

@bradleysmith9540 Жыл бұрын

Ask Dave the machinist how often he gets metal splinters 😢😅 if you’ve never had one, you are privileged.

@Wilson_Racing Жыл бұрын

You should've put a billet barbell in there instead of a stock one. They dont cost much

@lsXmatt Жыл бұрын

I put one in my Camaro’s 6.0 but it was a bit of a pain. I had to spend some time sanding it down because it wouldn’t fit.

@Wilson_Racing Жыл бұрын

@@lsXmatt I havent heard of them not fitting. They are supposed to be very snug in the bore

@williamking8684 Жыл бұрын

Lol people watching this in two years wont get the converter reference

@michaelhanewich245 Жыл бұрын

Selflessly edits out the part where the cramps, cursing, and bleeding of changing exhaust manifold bolts occurs.

@mattm5786 Жыл бұрын

Am I the only one who noticed the 1500 hood on it lol?

@lsXmatt Жыл бұрын

Going back to stock!

@mattm5786 Жыл бұрын

@@lsXmatt yeah that’s right. Tahiti is gonna look sweet.

@famfactor3073 5 ай бұрын

I heard what Dave said but I didn’t understand none of it. I don’t think he was speaking in English lol

@Last2firstFirst2last-mb5mi 11 ай бұрын

Siicckk

@Shallowballow Жыл бұрын

Should have got a 07 plus tahoe an deleted the afm no hate everyone knows gmt800 a are solid but 07-13 tahoes were the best looking

@shadowopsairman1583 Жыл бұрын

30+ PSI is normal, if youre 25 or less you have a problem

@aslacker 10 ай бұрын

Expired torque converter. LOL Someone has been on Sloppy

@mikejohnson9118 Жыл бұрын

It's a "Die" Matty....🙄